ورود به سایت ثبت نام

ورود به حساب کاربری

Username
رمز عبور *
من را به خاطر داشته باش

ایجاد یک حساب کاربری

پر کردن فیلدهایی که با ستاره (*) نشانه گذاری شده مورد نیاز است.
Name
Username
رمز عبور *
تکرار رمز عبور *
ایمیل *
تکرار ایمیل *

                                                                                                                                                                                                                                                                                                                 

                            لطفا برای خرید استانداردهای تکی / موردی مرد نیاز ... به وب سایت http://st2014.ir مراجعه

                                         تلفن تماس: 49720000 (سی خط)     فاکس: 49720200           (از ساعت 8:45 الی 16:30)   

 همراه:   09121554226  (از ساعت 10 الی 22)     تلقن های آنالوگ: 44159850   و  44158017   و  44163957  

 

   از این آدرس ایمیل در مقابل روبوت های اسپمر محافظت می شود. جهت مشاهده آن باید جاوااسکریپت فعال باشد.

  

لیست کامل استانداردهای ISA و IEEE

 

 

قابل جستجو بر اساس موضوع ، سال و شماره (کلید Ctrl+F)

 

IEEE 1;General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation

IEEE 100 CD;STANDARDS DICTIONARY: GLOSSARY OF TERMS and DEFINITIONS - STDSPCD1155

IEEE 100;The Authoritative Dictionary of IEEE Standards Terms - Seventh Edition

IEEE 1000;Standard for an 8-Bit Backplane Interface: STEbus Includes ANSI IEEE Std 1101-1987, IEEE Standard for Mechanical Core Specifications for Microcomputers - IEEE Computer Society Document

IEEE 1001;Guide for Interfacing Dispersed Storage and Generation Facilities with Electric Utility Systems

IEEE 1002;Standard Taxonomy for Software Engineering Standards - IEEE Computer Society Document

IEEE 1003.0;IEEE Guide to the Posix Open System Environment (OSE) - IEEE Computer Society Document

IEEE 1003.1;Information Technology-Portable Operating System Interface (POSIX) Base Specifications, Issue 7 - IEEE Computer Society

IEEE 1003.10;Standard for Information Technology POSIX-Based Supercomputing Application Environment Profile - IEEE Computer Society Document

IEEE 1003.13;Standard for Information TechnologyStandardized Application Environment Profile (AEP)POSIX® Realtime and Embedded Application Support - IEEE Computer Society Document

IEEE 1003.2 INT 20-157;Standard for Information Technology Portable Operating System Interface (POSIX) Part 2: Shell and Utilities Volume 2

IEEE 1003.2;Standard for Information Technology Portable Operating System Interface (POSIX) Part 2: Shell and Utilities - IEEE Computer Society Document

IEEE 1003.2;Standard for Information Technology Portable Operating System Interface (POSIX) Part 2: Shell and Utilities Volume 2 - IEEE Computer Society Document

IEEE 1003.2-1992  INT;IEEE Standards Interpretations for IEEE Std 1003.2-1992 - IEEE Computer Society Document

IEEE 1003.23;Guide for Developing User Organization Open System Environment (OSE) Profiles - IEEE Computer Society

IEEE 1003.26;Standard for Information Technology Portable Operating System Interface (POSIX) Part 26: Device Control Application Program Interface (API) [C Language] - IEEE Computer Society Document

IEEE 1003.2D;Standard for Information Technology Portable Operating System Interface (POSIX) Part 2: Shell and Utilities Amendment 1: Batch Environment - IEEE Computer Society Document

IEEE 1003.3;Standard for Information Technology - Test Methods for Measuring Conformance to POSIX - IEEE Computer Society Document

IEEE 1003.5 INT 1;Information Technology - POSIX Ada Language Interfaces - Part 1: Binding for System Application Program Interface (API) - Amendment 2: Protocol-Independent Interfaces

IEEE 1003.5;Information Technology - POSIX Ada Language Interfaces - Part 1: Binding for System Application Program Interface (API) - Amendment 2: Protocol-Independent Interfaces

IEEE 1003.9;Standard for Information Technology - POSIX FORTRAN 77 Language Interfaces - Part 1: Binding for System Application Program Interface (API) - IEEE Computer Society Document

IEEE 1004;DEFINITIONS OF PLANAR TRANSMISSION LINES

IEEE 1005;Standard Definitions and Characterization of Floating Gate Semiconductor Arrays

IEEE 1007;Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and Systems

IEEE 1008;Software Unit Testing

IEEE 101;Guide for the Statistical Analysis of Thermal Life Test Data

IEEE 1010;Guide for Control of Hydroelectric Power Plants

IEEE 1012;System and Software Verification and Validation - IEEE Computer Society

IEEE 1013;Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems

IEEE 1014.1;Standard for Futurebus+trademark  VME64 Bridge - IEEE Computer Society Document

IEEE 1014;Standard for a Versatile Backplane Bus: VMEbus - IEEE Computer Society Document; Best Copy Available

IEEE 1015 CORR 1;Applying Low- Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - IEEE Blue Book (Color Book Series)

IEEE 1015;Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems - IEEE Blue Book (Color Book Series)

IEEE 1016.1;Guide to Software Design Descriptions - IEEE Computer Society Document

IEEE 1016;Information Technology-Systems Design-Software Design Descriptions - IEEE Computer Society

IEEE 1017;Recommended Practice for Field Testing Electric Submersible Pump Cable

IEEE 1018;Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene-Propylene Rubber Insulation

IEEE 1019;Recommended Practice for Specifying Electric Submersible Pump Cable-Polypropylene Insulation

IEEE 1020;Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants

IEEE 1021;Recommended Practice for Utility Interconnection of Small Wind Energy Conversion Systems

IEEE 1023;Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities

IEEE 1024;RECOMMENDED PRACTICE FOR SPECIFYING DISTRIBUTION COMPOSITE INSULATORS (SUSPENSION TYPE)

IEEE 1025;Guide to the Assembly and Erection of Concrete Pole Structures

IEEE 1026;Recommended Practice for Test Methods for Determination of Compatibility of Materials with Conductive Polymeric Insulation Shields and Jackets

IEEE 1027;Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone Receiver

IEEE 1028;Software Reviews and Audits - IEEE Computer Society Document

IEEE 1029.1;Standard for Waveform and Vector Exchange to Support Design and Test Verification (WAVES) Language Reference Manual - IEEE Computer Society Document

IEEE 1030;GUIDE FOR SPECIFICATION OF HIGH-VOLTAGE DIRECT-CURRENT SYSTEMS PART I - STEADY-STATE PERFORMANCE (WITHDRAWN)

IEEE 1031 ERTA;Errata to IEEE Guide for the Functional Specification of Transmission Static Var Compensators

IEEE 1031;Guide for the Functional Specification of Transmission Static Var Compensators

IEEE 1033;RECOMMENDED PRACTICE FOR APPLICATION OF IEEE STD 828 TO NUCLEAR POWER GENERATING STATIONS

IEEE 1035;RECOMMENDED PRACTICE: TEST PROCEDURE FOR UTILITY-INTERCONNECTED STATIC POWER CONVERTERS

IEEE 1036;Guide for Application of Shunt Power Capacitors

IEEE 1037;Standard Terms and Definitions for Surface Acoustic Wave (SAW) Devices

IEEE 1042;Guide to Software Configuration Management - IEEE Computer Society Document

IEEE 1043;Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils

IEEE 1044.1;Guide to Classification for Software Anomalies - IEEE Computer Society Document

IEEE 1044;Classification for Software Anomalies - IEEE Computer Society

IEEE 1045;Standard for Software Productivity Metrics - IEEE Computer Society Document

IEEE 1046;Application Guide for Distributed Digital Control and Monitoring for Power Plants

IEEE 1048;Guide for Protective Grounding of Power Lines

IEEE 1050;Guide for Instrumentation and Control Equipment Grounding in Generating Stations

IEEE 1057;Standard for Digitizing Waveform Recorders

IEEE 1058;Recommended for Software Project Management Plans - IEEE Computer Society Document

IEEE 1059;Guide for Software Verification and Validation Plans - IEEE Computer Society Document

IEEE 1061;Standard for a Software Quality Metrics Methodology - IEEE Computer Society Document

IEEE 1062;Recommended Practice for Software Acquisition - Includes 1062-1993 and 1062a-1998; IEEE Computer Society Document

IEEE 1063;Software User Documentation - IEEE Computer Society Document

IEEE 1064;Guide for Multifactor Stress Functional Testing of Electrical Insulation Systems

IEEE 1067;Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC

IEEE 1068;The Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries

IEEE 1069;Recommended Practice for Precipitator and Baghouse Hopper Heating Systems

IEEE 107;STANDARD FOR RATING AND TESTING MAGNETIC AMPLIFIERS

IEEE 1070;Guide for the Design and Testing of Transmission Modular Restoration Structure Components

IEEE 1073.3.1;Standard for Medical Device Communications Transport Profile - Connection Mode

IEEE 1073.3.1A;Standard for Medical Device Communications - Transport Profile - Connection Mode-Amendment 1: Corrections and Clarifications

IEEE 1073.3.2;Standard for Medical Device Communications - Transport Profile - IrDA Based - Cable Connected

IEEE 1073.4.1;Standard for Medical Device Communications Physical Layer Interface - Cable Connected - Incorporates IEEE Std 1073.4.1-1994 and IEEE Std 1073.4.1a-1999

IEEE 1073;Standard for Medical Device Communications Overview and Framework

IEEE 1074;Developing a Software Project Life Cycle Process - IEEE Computer Society

IEEE 1076.1.1;VHDL Analog and Mixed-Signal Extensions-Packages for Multiple Energy Domain Support - IEEE Computer Society

IEEE 1076.1;VHDL Analog and Mixed-Signal Extensions - IEEE Computer Society

IEEE 1076.2;Standard VHDL Mathematical Packages - IEEE Computer Society Document

IEEE 1076.3;Standard VHDL Synthesis Packages - IEEE Computer Society Document

IEEE 1076.4;Behavioural languages Part 5: VITAL ASIC (application specific integrated circuit) modeling specification - IEEE Computer Society Document

IEEE 1076.4;Standard for VITAL ASIC (Application Specific Integrated Circuit) Modeling Specification

IEEE 1076.6;Standard for VHDL Register Transfer Level (RTL) Synthesis - IEEE Computer Society document

IEEE 1076.6;VHDL Register Transfer Level (RTL) synthesis - IEEE Computer Society document

IEEE 1076;Behavioural languages Part 1-1: VHDL language reference manual - IEEE Computer Society Document

IEEE 1076;VHDL Language Reference Manual - IEEE Computer Society

IEEE 1082;Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations

IEEE 1084;STANDARD GLOSSARY OF MATHEMATICS OF COMPUTING TERMINOLOGY; (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 1094;Recommended Practice for the Electrical Design and Operation of Windfarm Generating Stations

IEEE 1095;Guide for the Installation of Vertical Generators and Generator Motors for Hydroelectric Applications

IEEE 1096;Standard for Multiplexed High-Performance Bus Structure: VSB - IEEE Computer Society Document

IEEE 11;Rotating Electric Machinery for Rail and Road Vehicles

IEEE 1100;Recommended Practice for Powering and Grounding Electronic Equipment - IEEE Emerald Book (Color Book Series)

IEEE 1101.1;Standard for Mechanical Core Specifications for Microcomputers Using IEC 60603-2 Connectors - IEEE Computer Society Document

IEEE 1101.10;Standard for Additional Mechanical Specifications for Microcomputers Using the IEEE Std 1101.1-1991 Equipment Practice - IEEE Computer Society Document

IEEE 1101.11;Standard for Mechanical Rear Plug-In Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment Practice - IEEE Computer Society Document

IEEE 1101.2;Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards - IEEE Computer Society Document

IEEE 1101.3;Mechanical Standard for Conduction-Cooled and Air-Cooled 10 SU Modules - IEEE Computer Society Document

IEEE 1101.4;Standard for Military Module, Format E Form Factor - IEEE Computer Society Document

IEEE 1101.7;Standard for Space Applications Module, Extended Height Format E Form Factor - IEEE Computer Society Document

IEEE 1101;Standard for Mechanical Core Specifications for Microcomputers - IEEE Computer Society Document

IEEE 1106 ERTA;Errata to IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications

IEEE 1106;Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications

IEEE 1107;Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Random-Wound Stator Coils

IEEE 11073-00101;Health informatics-PoC medical device communication Part 00101: Guide-Guidelines for the use of RF wireless technology

IEEE 11073-00103;Health informatics-Personal health device communication Part 00103: Overview

IEEE 11073-10101;Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature

IEEE 11073-10102;Health informatics-Point-of-care medical device communication Part 10102: Nomenclature-Annotated ECG

IEEE 11073-10103;Health informatics-Point-of-care medical device communication Part 10103: Nomenclature-Implantable device, cardiac

IEEE 11073-10201;Health informatics - Point-of-care medical device communication - Part 10201: Domain information model

IEEE 11073-10404;Health informatics-Personal health device communication Part 10404: Device specialization-Pulse oximeter

IEEE 11073-10406;Health informatics-Personal health device communication Part 10406: Device specialization-Basic electrocardiograph (ECG) (1- to 3-lead ECG)

IEEE 11073-10407;Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor

IEEE 11073-10408;Health informatics - Personal health device communication - Part 10408: Device specialization - Thermometer

IEEE 11073-10415;Health informatics - Personal health device communication - Part 10415: Device specialization - Weighing scale

IEEE 11073-10417;Health Informatics-Personal health device communication Part 10417: Device specialization-Glucose meter

IEEE 11073-10418;Health informatics-Personal health device communication Part 10418: Device specialization-International Normalized Ratio (INR) monitor

IEEE 11073-10420;Health informatics-Personal health device communication Part 10420: Device specialization-Body composition analyzer

IEEE 11073-10421;Health informatics-Personal health device communication Part 10421: Device specialization-Peak expiratory flow monitor (peak flow)

IEEE 11073-10441;Health informatics-Personal health device communication Part 10441: Device specialization-Cardiovascular fitness and activity monitor

IEEE 11073-10442;Health informatics-Personal health device communication Part 10442: Device specialization-strength fitness equipment

IEEE 11073-10471;Health informatics-Personal health device communication Part 10471: Device specialization-Independent living activity hub

IEEE 11073-10472;Health informatics-Personal health device communication-Part 10472: Device specialization-Medication monitor

IEEE 11073-20101;Health informatics - Point-of-care medical device communication - Part 20101: Application profiles - Base standard

IEEE 11073-20601;Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol

IEEE 11073-30200;Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected

IEEE 11073-30200A;Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected - Amendment 1

IEEE 11073-30300;Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless

IEEE 11073-30400;Health informatics-Point-of-Care medical device communication Part 30400: Interface profile-Cabled Ethernet

IEEE 1109;Guide for the Interconnection of User-Owned Substations to Electric Utilities

IEEE 111;Standard for Wide-Band (Greater Than 1 Decade) Transformers

IEEE 1110;Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses

IEEE 1115;Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications

IEEE 1115A;Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing Margins

IEEE 1118;Standard Microcontroller System Serial Control Bus

IEEE 1119;Guide for Fence Safety Clearances in Electric-Supply Stations

IEEE 112;Standard Test Procedure for Polyphase Induction Motors and Generators

IEEE 1120;Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems

IEEE 1122;Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests

IEEE 1124;Guide for Analysis and Definition of DC Side Harmonic Performance of HVDC Transmission Systems

IEEE 1125;Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment

IEEE 1127;Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility

IEEE 1128;IEEE Recommended Practice for Radio-Frequency (RF) Absorber Evaluation in the Range of 30 MHz to 5 GHz

IEEE 1129;Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above)

IEEE 113;GUIDE: TEST PROCEDURES FOR DIRECT-CURRENT MACHINES

IEEE 1131;STANDARD CRYOSTAT END-CAP DIMENSIONS FOR GERMANIUM SEMICONDUCTOR GAMMA-RAY SPECTROMETERS

IEEE 1133;APPLICATION GUIDE FOR EVALUATING NONCERAMIC MATERIALS FOR HIGH-VOLTAGE OUTDOOR APPLICATIONS

IEEE 1137 CORR 1;Guide for the Implementation of Inductive Coordination Mitigation Techniques and Application- Corrigendum 1

IEEE 1137;Guide for the Implementation of Inductive Coordination Mitigation Techniques and Application

IEEE 1138;Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines

IEEE 1139;Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities

IEEE 114;Test Procedure for Single-Phase Induction Motors

IEEE 1140;Standard Procedures for the Measurement of Electric and Magnetic Fields From Video Display Terminals (VDTs) From 5 Hz to 400 kHz

IEEE 1142;Guide for the Selection, Testing, Application, and Installation of Cables having Radial-Moisture Barriers and or Longitudianal Water Blocking

IEEE 1143;Guide on Shielding Practice for Low Voltage Cables

IEEE 1144;Recommended Practice for Sizing Nickel-Cadmium Batteries for Photovoltaic (PV) Systems

IEEE 1145;Recommended Practice for Installation and Maintenance of Nickel-Cadmium Batteries for Photovoltaic (PV) Systems

IEEE 1147;Guide for the Rehabilitation of Hydroelectric Power Plants

IEEE 1149.1;Test Access Port and Boundary-Scan Architecture - IEEE Computer Society

IEEE 1149.4;A Mixed-Signal Test Bus - IEEE Computer Society

IEEE 1149.5;Standard for Module Test and Maintenance Bus (MTM-Bus) Protocol - IEEE Computer Society Document

IEEE 1149.6;Standard for Boundary-Scan Testing of Advanced Digital Networks - IEEE Computer Society Document

IEEE 1149.7;Reduced-Pin and Enhanced-Functionality Test Access Port and Boundary-Scan Architecture - IEEE Computer Society

IEEE 1149.8.1;Boundary-Scan-Based Stimulus of Interconnections to Passive and or Active Components - IEEE Computer Society

IEEE 115;Guide for Test Procedures for Synchronous Machines Part I-Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis

IEEE 1150;Recommended Practice for Integrating Power Plant Computer-Aided Engineering (CAE) Applications

IEEE 1154;Standard for Programmed Inquiry, Learning, or Teaching (PILOT) - IEEE Computer Society Document

IEEE 1155;Standard for VMA Extensions for Instrumentation: VXIbus - IEEE Computer Society Document; Stabilized March 25, 2004

IEEE 1156.1;Microcomputer Environmental Specification for Computer Modules - IEEE Computer Society; Stabilized: 19 March 2009

IEEE 1156.2;Standard for Environmental Specifications for Computer Systems - IEEE Computer Society Document

IEEE 1156.4;Standard for Environmental Specifications for Spaceborne Computer Modules - IEEE Computer Society Document

IEEE 1158;Recommended Practice for Determination of Power Losses in High-Voltage Direct-Current (HVDC) Converter Stations

IEEE 1159.3;IEEE Recommended Practice for the Transfer of Power Quality Data

IEEE 1159;Recommended Practice for Monitoring Electric Power Quality

IEEE 116;STANDARD TEST PROCEDURE FOR CARBON BRUSHES

IEEE 1160;Standard Test Procedures for High-Purity Germanium Crystals for Radiation Detectors

IEEE 1164 ERTA;Standard Multivalue Logic System for VHDL Model Interoperability (Std_Logic_1164) - IEEE Computer Society Document

IEEE 1164;Standard Multivalue Logic System for VHDL Model Interoperability (Std_Logic_1164) - IEEE Computer Society Document

IEEE 117;Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Electric Machinery

IEEE 1174;Serial Interface for Programmable Instrumentation

IEEE 1175.1;IEEE Guide for CASE Tool Interconnections - Classification and Description - IEEE Computer Society Document

IEEE 1175.2;Recommended Practice for CASE Tool Interconnection-Characterization of Interconnections - IEEE Computer Society

IEEE 1175.3;CASE Tool Interconnections-Reference Model for Specifying Software Behavior - IEEE Computer Society

IEEE 1175.4;CASE Tool Interconnections-Reference Model for Specifying System Behavior - IEEE Computer Society

IEEE 1175;Trial-Use Standard Reference Model for Computing System Tool Interconnections - IEEE Computer Society Document

IEEE 1177;FASTBUS Standard Routines

IEEE 1178;Standard for the Scheme Programming Language - IEEE Computer Society Document

IEEE 118;Standard Test Code for Resistance Measurement

IEEE 1180;Standard Specifications for the Implementations of 8x8 Inverse Discrete Cosine Transform

IEEE 1181;Recommended Practice for Latchup Test Methods for CMOS and BiCMOS Integrated-Circuit Process Characterization

IEEE 1184;Guide for Batteries for Uninterruptible Power Supply Systems

IEEE 1185;Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities

IEEE 1187;Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications

IEEE 1188;Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications

IEEE 1189;Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications

IEEE 119;RECOMMENDED PRACTICE FOR GENERAL PRINCIPLES OF TEMPERATURE MEASUREMENT AS APPLIED TO ELECTRICAL APPARATUS

IEEE 1193;Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators

IEEE 1194.1;Standard for Electrical Characteristics of Backplane Transceiver Logic (BTL) Interface Circuits - IEEE Computer Society Document

IEEE 1194;Standard for Backplane Electrical Performance - IEEE Computer Society Document

IEEE 1196;Standard for a Simple 32-Bit Backplane Bus: NuBus Includes ANSI IEEE Std 1101-1987, IEEE Standard for Mechanical Core Specifications for Microcomputers - IEEE Computer Society Document

IEEE 120;Master Test Guide for Electrical Measurements in Power Circuits

IEEE 1202 CORR 1;Flame-Propagation Testing of Wire and Cable Corrigendum 1

IEEE 1202;Standard for Flame-Propagation Testing of Wire and Cable

IEEE 1204;Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities

IEEE 1205;Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities

IEEE 1206;Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets

IEEE 1207;Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units

IEEE 1209;Recommended Practice for the Evaluation and Selection of CASE Tools - IEEE Computer Society Document

IEEE 1210 CORR 1;Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1

IEEE 1210 INT 1;Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable

IEEE 1210;Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable

IEEE 1212.1;Standard for Communicating Among Processors and Peripherals Using Shared Memory (Direct Memory Access - DMA) - IEEE Computer Society Document

IEEE 1212;Standard for a Control and Status Registers (CSR) Architecture for Microcomputer Buses - IEEE Computer Society Document

IEEE 1214;Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy

IEEE 1215;Guide for the Application of Separable Insulated Connectors

IEEE 1216;Guide for the Application of Faulted Circuit Indicators for 200 A, Single-Phase Underground Residential Distribution (URD)

IEEE 1217;Guide for Preservative Treatment of Wood Distribution and Transmission Line Structures

IEEE 1219;Standard for Software Maintenance - IEEE Computer Society Document

IEEE 122;Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units

IEEE 1220;Standard for Application and Management of the Systems Engineering Process - IEEE Computer Society Document

IEEE 12207.0;Industry Implementation of International Standard ISO IEC 12207 : 1995 (ISO IEC 12207) Standard for Information Technology - Software Life Cycle Processes - March 1998

IEEE 12207.1;Industry Implementation of International Standard ISO IEC 12207 : 1995 (ISO IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Life Cycle Data - April 1998

IEEE 12207.2;Industry Implementation of International Standard ISO IEC 12207 : 1995 (ISO IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Implementation Considerations

IEEE 12207;Systems and software engineering - Software life cycle processes - IEEE Computer Society

IEEE 1221;Guide for Fire Hazard Assessment of Electrical Insulating Materials in Electrical Power Systems

IEEE 1222;Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines

IEEE 1224.1;Standard for Information Technology - X.400-Based Electronic Messaging - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1224.1-1993  INT;IEEE Standards Interpretations for IEEE Std 1224 - 1993, IEEE Std 1327 - 1993, and IEEE Std 1224.1 - 1993 - IEEE Computer Society Document

IEEE 1224.2 INT;Information Technology-Directory Services-Application Program Interface (API) [Language Independent]

IEEE 1224.2;Information Technology-Directory Services-Application Program Interface (API) [Language Independent] - IEEE Computer Society Document

IEEE 1224;Standard for Information Technology - Open Systems Interconnection (OSI) Abstract Data Manipulation - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1224-1993  INT;IEEE Standards Interpretations for IEEE Std 1224 - 1993, IEEE Std 1327 - 1993, and IEEE Std 1224.1 - 1993 - IEEE Computer Society Document

IEEE 1226.2 TRIAL-USE;Trial-Use Standard for Ada-Based ATLAS-Level Test Procedure Interface for a Broad-Based Environment for Test (ABBET)

IEEE 1226.3;Standard for Software Interface for Resource Management for A Broad-Based Environment for Test (ABBET)

IEEE 1226.6;Guide for the Understanding of the "A Broad Based Environment for Test (ABBET)TM" Standard

IEEE 1226;Trial-Use Standard for a Broad-Based Environment for Test (ABBET) - Overview and Architecture

IEEE 1227;Guide for the Measurement of DC Electric-Field Strength and Ion Related Quantities

IEEE 1228;Standard for Software Safety Plans - IEEE Computer Society Document

IEEE 1232.1;Trial Use - Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE): Data and Knowledge Specification

IEEE 1232.2 TRIAL USE;Trial-Use Standard for Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE): Service Specification

IEEE 1232;Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE)

IEEE 1233;Guide for Developing System Requirements Specifications - Includes 1233-1996 and 1233a-1998; IEEE Computer Society Document

IEEE 1234;Guide for Fault-Locating Techniques on Shielded Power Cable Systems

IEEE 1235;Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts

IEEE 1238.1;Standard for Information Technology, OSI Application Program Interfaces - File Transfer, Access, and Management (C Language) - IEEE Computer Society Document

IEEE 1240;Guide for the Evaluation of the Reliability of HVDC Converter Stations

IEEE 1241;Terminology and Test Methods for Analog-to-Digital Converters

IEEE 1242;Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants

IEEE 1243;Guide for Improving the Lightning Performance of Transmission Lines - Includes Access to Additional Content.

IEEE 1244.1;Standard for Media Management System (MMS) Architecture - IEEE Computer Society Document

IEEE 1244.2;Standard for Media Management Systems (MMS) Session Security, Authentication, Initialization Protocol (SSAIP) - IEEE Computer Society

IEEE 1244.3;Standard for Media Management System (MMS) Media Management Protocol (MMP) - IEEE Computer Society Document

IEEE 1244.4;Standard for Media Management System (MMS) Drive Management Protocol (DMP) - IEEE Computer Society Document

IEEE 1244.5;Standard for Media Management System (MMS) Library Management Protocol (LMP) - IEEE Computer Society Document

IEEE 1246;Guide for Temporary Protective Grounding Systems Used in Substations

IEEE 1247;Standard for Interrupter Switches for Alternating Current, Rated Above 1000 V

IEEE 1248;Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants

IEEE 1249;Guide for Computer-Based Control for Hydroelectric Power Plant Automation

IEEE 125;Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators

IEEE 1250;Guide for Identifying and Improving Voltage Quality in Power Systems

IEEE 1255;Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors

IEEE 126;Recommended Specification for Speed Governing of Internal Combustion Engine-Generator Units

IEEE 1260;Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines

IEEE 1262;Recommened Practice for Qualification of Photovoltaic (PV) Modules

IEEE 1264;Guide for Animal Deterrents for Electric Power Supply Substations

IEEE 1267;Trial-Use Guide for Development of Specification for Turnkey Substation Projects

IEEE 1268;Guide for Safety in the Installation of Mobile Substation Equipment

IEEE 127;STANDARD FOR AEROSPACE EQUIPMENT VOLTAGE AND FREQUENCY RATINGS

IEEE 1275.1;Standard for Boot (Initialization Configuration) Firmware: Instruction Set Architecture (ISA) Supplement for IEEE 1754 - IEEE Computer Society Document

IEEE 1275.2;Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 1496 (SBus) - IEEE Computer Society Document

IEEE 1275.4;Standard for Boot (Initialization Configuration) Firmware: Bus Supplement for IEEE 896 (Futurebus+) - IEEE Computer Society Document

IEEE 1275;Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices - IEEE Computer Society Document

IEEE 1276;Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers

IEEE 1277;General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission

IEEE 1278.1;Distributed Interactive Simulation - Application Protocols - IEEE Computer Society

IEEE 1278.2;Standard for Distributed Interactive Simulation - Communication Services and Profiles - IEEE Computer Society Document

IEEE 1278.3;Recommended Practice for Distributed Interactive Simulation - Exercise Management and Feedback - IEEE Computer Society

IEEE 1278.4;Recommended Practice for Distributed Interactive Simulation - Verification, Validation, and Accreditation - IEEE Computer Society

IEEE 1278;Information Technology-Protocols for Distributed Interactive Simulation Applications - IEEE Computer Society

IEEE 128;GUIDE FOR AIRCRAFT ELECTRIC SYSTEMS

IEEE 1283;Guide for Determining the Effects of High-Temperature Operation on Conductors, Connectors and Accessories

IEEE 1284.1;Standard for Information Technology - Transport Independent Printer System Interface (TIP SI) - IEEE Computer Society Document

IEEE 1284.3;Standard for Interface and Protocol Extensions to IEEE 1284-Compliant Peripherals and Host Adapters - IEEE Computer Society Document

IEEE 1284.4;Standard for Data Delivery and Logical Channels for IEEE 1284 Interfaces - IEEE Computer Society Document

IEEE 1284;Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers - IEEE Computer Society

IEEE 1285;Standard for Scalable Storage Interface (S2I) - IEEE Computer Society Document

IEEE 1289;Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations

IEEE 1290;Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations

IEEE 1291 ERTA;Guide for Partial Discharge Measurement in Power Switchgear

IEEE 1291;Guide for Partial Discharge Measurement in Power Switchgear

IEEE 1293 CORR 1;Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Nongyroscopic Accelerometers Corrigendum 1: Changes to Annex K and Annex L

IEEE 1293;Standard Specification Format Guide and Test Procedure for Linear Single-Axis, Nongyroscopic Accelerometers

IEEE 1295;Standard for Information Technology - X Window System - Modular Toolkit Environment (MTE)

IEEE 1296;Information Technology - Microprocessor Systems - High-Performance Synchronous 32-Bit Bus: MULTIBUS II - IEEE Computer Society Document; ISO IEC 10861

IEEE 1298;Software Quality Management System Part 1: Requirements - IEEE Computer Society Document

IEEE 1299;Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems

IEEE 1300;Guide for Cable Connections for Gas-Insulated Substations

IEEE 1301.1;Standard for Metric Equipment Practice for Microcomputers - Convection-Cooled with 2 mm Connectors - IEEE Computer Society Document

IEEE 1301.2;Recommended Practices for the Implementation of a Metric Equipment Practice - IEEE Computer Society Document

IEEE 1301.3;Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors - IEEE Computer Society Document

IEEE 1301.4;Standard for a Metric Equipment Practice for Microcomputers - Coordination Document for Mezzanine Cards - IEEE Computer Society Document

IEEE 1301;Standard for Metric Equipment Practice for Microcomputers - Coordination Document - IEEE Computer Society Document

IEEE 1302;Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz

IEEE 1303;Guide for Static Var Compensator Field Tests

IEEE 1307;Standard for Fall Protection for Utility Work

IEEE 1308;Recommended Practice for Instrumentation: Specifications for Magnetic Flux Density and Electric Field Strength Meters-10 Hz to 3 kHz

IEEE 1309;Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz

IEEE 1310;Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines

IEEE 1312;Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal

IEEE 1313.1;Standard for Insulation Coordination - Definitions, Principles, and Rules

IEEE 1313.2;Guide for the Application of Insulation Coordination

IEEE 1313;STANDARD FOR POWER SYSTEMS - INSULATION COORDINATION

IEEE 132;TEST CODE FOR D-C AIRCRAFT ROTATING MACHINES

IEEE 1320.1;Standard for Functional Modeling Language - Syntax and Semantics for IDEF0 - IEEE Computer Society Document

IEEE 1320.2;Standard for Conceptual Modeling Language Syntax and Semantics for IDEF1X97 (IDEFobject) - IEEE Computer Society Document

IEEE 1325;Recommended Practice for Reporting Field Failure Data for Power Circuit Breakers

IEEE 1326.1;Standard for Information Technology - Test Methods for Measuring Conformance to X.400-Based Electronic Messaging - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1326.2;Standard for Information Technology - Test Methods for Measuring Conformance to Directory Services - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1326;Standard for Information Technology - Test Methods for Measuring Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1327.1;Standard for Information Technology - X.400-Based Electronic Messaging C Language Interfaces - Binding for Application Program Interface (API) - IEEE Computer Society Document

IEEE 1327.2;Standard for Information Technology - Directory Services C Language Interfaces - Binding for Application Program Interface (API) - IEEE Computer Society Document

IEEE 1327;Standard for Information Technology - Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interface (API) - IEEE Computer Society Document

IEEE 1327-1993  INT;IEEE Standards Interpretations for IEEE Std 1224 - 1993, IEEE Std 1327 - 1993, and IEEE Std 1224.1 - 1993 - IEEE Computer Society Document

IEEE 1328.1;Standard for Information Technology - Test Methods for Measuring Conformance to X.400-Based Electronic Messaging C Language Interfaces - Binding for Application Program Interface (API)

IEEE 1328.2;Standard for Information Technology - Test Methods for Measuring Conformance to Directory Services C Language Interfaces - Binding for Application Program Interface (API) - IEEE Computer Society Document

IEEE 1328;Standard for Information Technology - Test Methods for Measuring Conformance to Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interface (API) - IEEE Computer Society Document

IEEE 1329;Standard Method for Measuring Transmission Performance of Speakerphones

IEEE 1332;Reliability Program for the Development and Production of Electronic Products

IEEE 1333;Guide for Installation of Cable Using the Guided Boring Method

IEEE 1344;Standard for Synchrophasors for Power Systems

IEEE 1346;Recommended Practice for Evaluating Electric Power System Compatibility With Electronic Process Equipment

IEEE 1348;Recommended Practice for the Adoption of Computer-Aided Software Engineering (CASE) Tools - IEEE Computer Society Document

IEEE 1349;Guide for the Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations

IEEE 135;RECOMMENDED PRACTICE FOR AIRCRAFT, MISSILE, AND SPACE EQUIPMENT ELECTRICAL INSULATION TESTS

IEEE 1351;Standard for Information Technology - ACSE and Presentation Layer Services - Application Program Interface (API) (Language Independent) - IEEE Computer Society Document

IEEE 1353;Standard for Information Technology - ACSE and Presentation Layer Services - Application Program Interface (API) (C Language Binding) - IEEE Computer Society Document

IEEE 1355;Standard for Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) - IEEE Computer Society Document; ISO IEC 14575:2000

IEEE 1361;Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems

IEEE 1362;Guide for Information Technology - System Definition - Concept of Operations (ConOps) Document - IEEE Computer Society Document; Incorporates IEEE 1362a-1998

IEEE 1363.1;Specification for Public Key Cryptographic Techniques Based on Hard Problems over Lattices - IEEE Computer Society

IEEE 1363.2;Specifications for Password-Based Public-Key Cryptographic Techniques - IEEE Computer Society

IEEE 1363.3;Identity-Based Cryptographic Techniques using Pairings - IEEE Computer Society

IEEE 1363;Standard Specifications for Public-Key Cryptography - IEEE Computer Society Documents

IEEE 1363A;Standard Specifications for Public-Key Cryptography Public-Key Cryptography - Amendment 1: Additional Techniques

IEEE 1364.1;Standard for Verilog Register Transfer Level Synthesis - IEEE Computer Society Document

IEEE 1364.1;Verilog register transfer level synthesis

IEEE 1364;Behavioural languages - Part 4: Verilog hardware description language - IEEE Computer Society Document

IEEE 1364;Standard Verilog Hardware Description Language - IEEE Computer Society Document

IEEE 1366 ERTA;Errata to Guide for Electric Power Distribution Reliability Indices

IEEE 1366;Guide for Electric Power Distribution Reliability Indices

IEEE 1368;Guide for Aeolian Vibration Field Measurements of Overhead Conductors

IEEE 1374;Guide for Terrestrial Photovoltaic Power System Safety

IEEE 1375;Guide for the Protection of Stationary Battery Systems

IEEE 1377;Utility Industry Metering Communication Protocol Application Layer (End Device Data Tables)

IEEE 1378;Guide for Commissioning High-Voltage Direct-Current (HVDC) Converter Stations and Associated Transmission Systems

IEEE 1379;Recommended Practice for Data Communications between Remote Terminal Units and Intelligent Electronic Devices in a Substation

IEEE 1386.1;Standard Physical and Environmental Layers for PCI Mezzanine Cards (PMC) - IEEE Computer Society Document; Incorporated into IEEE 1386:2001

IEEE 1386;Common Mezzanine Card (CMC) Family - IEEE Computer Society Document; Incorporates IEEE 1386.1:2001

IEEE 1387.2;Information Technology - Portable Operating System Interface (POSIX) System Administration - Part 2: Software Administration - First Edition

IEEE 1387.3;Standard for Information Technology Portable Operating System Interface (POSIX) System Administration Part 3: User and Group Account Administration - IEEE Computer Society Document

IEEE 1388;Standard for the Electronic Reporting of Transformer Test Data

IEEE 139;Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User's Premises

IEEE 1390.2;Standard for Automatic Meter Reading Via Telephone - Network to Telemetry Interface Unit

IEEE 1390.3;Standard for Automatic Meter Reading Via Telephone - Network to Utility Controller

IEEE 1390;Standard for Utility Telemetry Service Architecture for Switched Telephone Network

IEEE 1393;Standard for Spaceborne Fiber-Optic Data Bus - IEEE Computer Society Document

IEEE 1394.1;High Performance Serial Bus Bridges - IEEE Computer Society

IEEE 1394.3;A High Performance Serial Bus Peer-to-Peer Data Transport Protocol (PPDT) - IEEE Computer Society

IEEE 1394;A High-Performance Serial Bus - IEEE Computer Society

IEEE 140;Recommended Practice for Minimization of Interference from Radio-Frequency Heating Equipment

IEEE 1402;Guide for Electric Power Substation Physical and Electronic Security

IEEE 1404;Guide for Microwave Communications System Development: Design, Procurement, Construction, Maintenance, and Operation

IEEE 1406;Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable Systems

IEEE 1407;Guide for Accelerated Aging Tests for Medium-Voltage (5 kV–35 kV) Extruded Electric Power Cables Using Water-Filled Tanks

IEEE 1409;Guide for Application of Power Electronics for Power Quality Improvement on Distribution Systems Rated 1 kV Through 38 kV

IEEE 141;Recommended Practice for Electric Power Distribution for Industrial Plants - IEEE Red Book (Color Book Series); Correction Sheet - July 23, 1997; Correction Sheet June 9, 1998

IEEE 1410;Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines

IEEE 14102;Adoption of ISO IEC 14102:2008 Information Technology-Guideline for the Evaluation and Selection of CASE Tools - IEEE Computer Society

IEEE 1413.1;Guide for Selecting and Using Reliability Predictions Based on IEEE 1413

IEEE 1413;Standard Framework for Reliability Prediction of Hardware

IEEE 14143.1;Implementation Note for IEEE Adoption of ISO IEC 14143-1:1998 Information Technology - Software Measurement - Functional Size Measurement - Part 1: Definition of Concepts - IEEE Computer Society Document

IEEE 1415;Induction Machinery Maintenance Testing and Failure Analysis

IEEE 1416;Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations

IEEE 142 ERTA;Recommended Practice for Grounding of Industrial and Commercial Power Systems

IEEE 142;Recommended Practice for Grounding of Industrial and Commercial Power Systems - IEEE Green Book (Color Book Series)

IEEE 1420.1;Standard for Information Technology - Software Reuse - Data Model for Reuse Library Interoperability: Basic Interoperability Data Model (BIDM) - IEEE Computer Society Document

IEEE 1420.1A;Supplement to IEEE Standard for Information Technology - Software Reuse - Data Model for Reuse Library Interoperability: Asset Certification Framework - IEEE Computer Society Document

IEEE 1420.1B;Supplement to IEEE Standard for Information Technology - Software Reuse - Data Model for Reuse Library Interoperability: Intellectual Property Rights Framework - IEEE Computer Society Document

IEEE 1425;Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems

IEEE 1427;Guide for Recommended Electrical Clearances and Insulation Levels in Air-Insulated Electrical Power Substations

IEEE 1428;Guide for Installation Methods for Fiber-Optic Cables in Electric Power Generating Stations and in Industrial Facilities

IEEE 143;APPLICATION GUIDE FOR GROUND-FAULT NEUTRALIZERS APPLICATION GUIDE FOR GROUNDING OF SYNCHRONOUS GENERATOR SYSTEMS APPLICATION GUIDE FOR NEUTRAL GROUNDING OF TRANSMISSION SYSTEMS

IEEE 1430;Guide for Information Technology - Software Reuse - Concept of Operations for Interoperating Reuse Libraries - IEEE Computer Society Document

IEEE 1431 CORR 1;Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros Corrigendum 1: Figure 1- Gyro Axes and Misalignment Angles

IEEE 1431;Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros

IEEE 1434;Guide to the Measurement of Partial Discharges in Rotating Machinery

IEEE 144;STANDARD GUIDE FOR EVALUATING THE EFFECT OF SOLAR RADIATION ON OUTDOOR METAL-CLAD SWITCHGEAR

IEEE 1441;Guide for Inspection of Overhead Transmission Line Construction

IEEE 1445;Standard for Digital Test Interchange Format (DTIF)

IEEE 14471;Guide for Adoption of ISO IEC TR 14471:2007 Information Technology-Software Engineering-Guidelines for the Adoption of CASE Tools - IEEE Computer Society

IEEE 145;Definitions of Terms for Antennas

IEEE 1450.1;Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for Semiconductor Design Environments - IEEE Computer Society

IEEE 1450.2;IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450 -1999) for DC Level Specification - IEEE Computer Society

IEEE 1450.3;Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450â„¢-1999) for Tester Target Specification - Computer Society

IEEE 1450.6.1;Describing On-Chip Scan Compression - IEEE Computer Society

IEEE 1450.6.2;Memory Modeling in Core Test Language (CTL) - IEEE Computer Society

IEEE 1450.6;IEEE Standard Test Interface Language (STIL) for Digital Test Vector DataCore Test Language (CTL)

IEEE 1450;Standard Test Interface Language (STIL) for Digital Test Vector Data - IEEE Computer Society

IEEE 1451.0;Standard for a Smart Transducer Interface for Sensors and Actuators – Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 1451.1;Standard for a Smart Transducer Interface for Sensors and Actuators-Network Capable Application Processor (NCAP) Information Model

IEEE 1451.2;Standard for a Smart Transducer Interface for Sensors and Actuators - Transducer to Microprocessor Communicatio Protocols and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 1451.3;Standard for a Smart Transducer Interface for Sensors and ActuatorsDigital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems

IEEE 1451.4;Standard for A Smart Transducer Interface for Sensors and Actuators Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 1451.5;Standard for a Smart Transducer Interface for Sensors and Actuators - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 1451.7;A Smart Transducer Interface for Sensors and Actuators-Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats

IEEE 1453.1;Guide-Adoption of IEC TR 61000-3-7:2008, Electromagnetic compatibility (EMC)-Limits-Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems

IEEE 1453;Recommended Practice-Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC)-Testing and measurement techniques-Flickermeter- Functional and design specifications

IEEE 1455;Standard for Message Sets for Vehicle Roadside Communications

IEEE 1458;Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications

IEEE 1459;Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions

IEEE 146;STANDARD DEFINITIONS OF FUNDAMENTAL WAVEGUIDE TERMS

IEEE 1460;Guide for the Measurement of Quasi-Static Magnetic and Electric Fields

IEEE 1462;Information Technology - Guideline for the Evaluation and Selection of CASE Tools - IEEE Computer Society Document

IEEE 1465;Adoption of International Standard ISO IEC 12119: 1994(E) Information Technology - Software Packages - Quality Requirements and Testing - IEEE Computer Society Document

IEEE 147;STANDARD DEFINITIONS OF TERMS FOR WAVEGUIDE COMPONENTS

IEEE 1471;Recommended Practice for Architectural Description of Software-Intensive Systems - IEEE Computer Society

IEEE 1473;Communications Protocol Aboard Passenger Trains

IEEE 1474.1;Communications-Based Train Control (CBTC) Performance and Functional Requirements

IEEE 1474.2;User Interface Requirements in Communications-Based Train Control (CBTC) Systems

IEEE 1474.3;Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional Allocations

IEEE 1474.4;Recommended Practice for Functional Testing of a Communications-Based Train Control (CBTC) System

IEEE 1475;The Functioning of Interfaces Among Propulsion, Friction Brake, and Train-Borne Master Control on Rail Rapid Transit Vehicles

IEEE 1476;Passenger Train Auxiliary Power Systems Interfaces

IEEE 14764 ERTA;Corrections to Standard for Software Engineering- Software Life Cycle Processes- Maintenance - IEEE Computer Society

IEEE 14764 ERTA;Software Engineering-Software Life Cycle Processes-Maintenance - IEEE Computer Society

IEEE 14764;Software Engineering Software Life Cycle Processes Maintenance - IEEE Computer Society

IEEE 1477;Standard for Passenger Information System for Rail Transit Vehicles

IEEE 1478;Environmental Conditions for Transit Railcar Electronic Equipment

IEEE 148;STANDARD FOR WAVEGUIDE AND WAVEGUIDE COMPONENT MEASUREMENTS

IEEE 1481;Integrated Circuit (IC) Open Library Architecture (OLA) - IEEE Computer Society

IEEE 1482.1;Rail Transit Vehicle Event Recorders

IEEE 1483;Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control

IEEE 1484.1;IEEE Standard for Learning TechnologyLearning Technology Systems Architecture (LTSA) - IEEE Computer Society

IEEE 1484.11.1;Learning Technology-Data Model for Content Object Communication - IEEE Computer Society; Incorporating Errata: June 24, 2010

IEEE 1484.11.2;Learning Technology-ECMAScript Application Programming Interface for Content to Runtime Services Communication - IEEE Computer Society

IEEE 1484.11.3;Learning TechnologyExtensible Markup Language (XML) Schema Binding for Data Model for Content Object Communication - IEEE Computer Society

IEEE 1484.12.1 CORR 1;Learning Object Metadata Corrigendum 1 - IEEE Computer Society

IEEE 1484.12.1;Learning Object Metadata - IEEE Computer Society

IEEE 1484.12.3;Standard for Learning TechnologyExtensible Markup Language (XML) Schema Definition Language Binding for Learning Object Metadata - IEEE Computer Society

IEEE 1484.13.1;Learning Technology-Conceptual Model for Resource Aggregation for Learning, Education, and Training - IEEE Computer Society

IEEE 1484.13.2;Recommended Practice for Learning Technology-Metadata Encoding and Transmission Standard (METS) Mapping to the Conceptual Model for Resource Aggregation - IEEE Computer Society

IEEE 1484.13.3;Recommended Practice for Learning Technology-ISO 21000-2:2005 Information Technology-Multimedia Framework (MPEG-21)-Part 2: Digital Item Declaration Mapping to the Conceptual Model for Resource Aggregation - IEEE Computer Society

IEEE 1484.13.5;Recommended Practice for Learning Technology-IETF RFC 4287-Atom Syndication Format-Mapping to the Conceptual Model for Resource Aggregation - IEEE Computer Society

IEEE 1484.20.1;Learning Technology-Data Model for Reusable Competency Definitions - IEEE Computer Society

IEEE 1484.4;Trial-Use Recommended Practice for Digital Rights Expression Languages (DRELs) Suitable for eLearning Technologies - IEEE Computer Society

IEEE 1488;Trial-Use Standard for Message Set Template for Intelligent Transportation Systems

IEEE 1489;Standard for Data Dictionaries for Intelligent Transportation Systems

IEEE 149;Test Procedures for Antennas

IEEE 1490;Guide-Adoption of the Project Management Institute (PMI) Standard A Guide to the Project Management Body of Knowledge (PMBOK Guide)-Fourth Edition - IEEE Computer Society

IEEE 1491;Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications

IEEE 1493;Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories

IEEE 1496;SBus - Chip and Module Interconnect Bus - ISO IEC 15205:2000

IEEE 1497;Delay and power calculation standards Part 3: Standard Delay Format (SDF) for the electronic design process - Replaces IEEE 1497-2001; IEEE Computer Society Document; Same as IEC 61523-3

IEEE 1497;Standard for Standard Delay Format (SDF) for the Electronic Design Process - IEEE Computer Society Document

IEEE 1499;Standard Interface for Hardware Description Models of Electronic Components - IEEE Computer Society Document

IEEE 1500;Testability Method for Embedded Core-based Integrated Circuits - IEEE Computer Society

IEEE 1502;Recommended Practice for Radar Cross-Section Test Procedures

IEEE 15026-1;Trial-Use Standard-Adoption of ISO IEC TR 15026-1:2010 Systems and Software Engineering-Systems and Software Assurance-Part 1: Concepts and Vocabulary - IEEE Computer Society

IEEE 15026-2;Adoption of ISO IEC 15026-2:2011 Systems and Software Engineering-Systems and Software Assurance-Part 2: Assurance Case - IEEE Computer Society

IEEE 15026-3;Adoption of ISO IEC 15026-3-Systems and Software Engineering-Systems and Software Assurance-Part 3: System Integrity Levels - IEEE Computer Society

IEEE 15026-4;IEEE Standard Adoption of ISO IEC 15026-4-Systems and Software Engineering-Systems and Software Assurance-Part 4: Assurance in the Life Cycle

IEEE 1505.1;Trial-Use Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505

IEEE 1505;Receiver Fixture Interface

IEEE 151;STANDARD DEFINITIONS OF TERMS FOR AUDIO AND ELECTROACOUSTICS

IEEE 1511.1;Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kV

IEEE 1511;Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV through 46 kV

IEEE 1512.1;IEEE Standard for Common Traffic Incident Management Message Sets for Use by Emergency Management Centers

IEEE 1512.2;Standard for Public Safety Traffic Incident Management Message Sets for Use by Emergency Management Centers

IEEE 1512.3;Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management Centers

IEEE 1512;Common Incident Management Message Sets for Use by Emergency Management Centers

IEEE 1513;IEEE Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Reciever Sections and Modules

IEEE 1515;Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods

IEEE 1516.1;Modeling and Simulation (M&S) High Level Architecture (HLA) - Federate Interface Specification - IEEE Computer Society

IEEE 1516.2;Modeling and Simulation (M&S) High Level Architecture (HLA) - Object Model Template (OMT) Specification - IEEE Computer Society

IEEE 1516.4;Recommended Practice for Verification, Validation, and Accreditation of a Federation-An Overlay to the High Level Architecture Federation Development and Execution Process - IEEE Computer Society

IEEE 1516;Modeling and Simulation(M&S) High Level Architecture (HLA)-Framework and Rules - IEEE Computer Society

IEEE 1517;Information Technology-System and Software Life Cycle Processes-Reuse Processes - IEEE Computer Society

IEEE 152;Audio Program Level Measurement

IEEE 1521;Measurement of Video Jitter and Wander

IEEE 1522;Trial-Use Standard for Testability and Diagnosability Characteristics and Metrics

IEEE 1523;Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators

IEEE 1526;Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems

IEEE 1527;Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas

IEEE 1528 ERTA;Errata to IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

IEEE 1528;Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques

IEEE 15288;Systems and software engineering - System life cycle processes - IEEE Computer Society

IEEE 15289;Systems and software engineering - Content of life-cycle information products (documentation) - IEEE Computer Society

IEEE 1531;Guide for Application and Specification of Harmonic Filters

IEEE 1532;Standard for In-System Configuration of Programmable Devices - IEEE Computer Society Document

IEEE 1534;Recommended Practice for Specifying Thyristor-Controlled Series Capacitors

IEEE 1536;Rail Transit Vehicle Battery Physical Interface

IEEE 1538;Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers

IEEE 1540;Standard for Software Life Cycle Processes - Risk Management - IEEE Computer Society;:2004

IEEE 1541;Trial-Use Standard for Prefixes for Binary Multiples

IEEE 1542;Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines

IEEE 1545;Standard for Parametric Data Log Format

IEEE 1546;Guide for Digital Test Interchange Format (DTIF) Application

IEEE 1547.1 INT 1;Conformance Test Procedures for Equipment Interconnecting Distributed Resources With Electric Power Systems

IEEE 1547.1;Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems

IEEE 1547.2;Interconnecting Distributed Resources with Electric Power Systems

IEEE 1547.3;Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems

IEEE 1547.4;Guide for Design, Operation, and Integration of Distributed Resource Island Systems with Electric Power Systems

IEEE 1547.6;Recommended Practice for Interconnecting Distributed Resources with Electric Power Systems Distribution Secondary Networks

IEEE 1547.7;Guide for Conducting Distribution Impact Studies for Distributed Resource Interconnection

IEEE 1547;Interconnecting Distributed Resources with Electric Power Systems

IEEE 1547A;Interconnecting Distributed Resources with Electric Power Systems Amendment 1

IEEE 1549;Microwave Filter Definitions

IEEE 155;Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs

IEEE 1553;Standard for Voltage-Endurance Testing of Form-Wound Coils and Bars for Hydrogenerators

IEEE 1554 ERTA;Errata to Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

IEEE 1554;Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

IEEE 1558;Standard for Software Documentation for Rail Equipment and Systems

IEEE 1559;Inertial Systems Terminology

IEEE 156;IRE STANDARDS ON CIRCUITS: DEFINITIONS OF TERMS FOR LINEAR PASSIVE RECIPROCAL TIME INVARIANT NETWORKS 1960

IEEE 1560;IEEE Standard for Methods of Measurement of Radio-Frequency Power-Line Interference Filter in the Range of 100 Hz to 10 GHz

IEEE 1561;Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems

IEEE 1562;Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems

IEEE 1566;Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger

IEEE 1568;IEEE Recommended Practice for Electrical Sizing of Nickel-Cadmium Batteries for Rail Passenger Vehicles

IEEE 1570;The Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail Intersection

IEEE 1572;Guide for Application of Composite Line Post Insulators

IEEE 1573;Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance

IEEE 1578;Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management

IEEE 158;STANDARD METHODS OF TESTING ELECTRON TUBES; CORRECTIONS - DECEMBER 1965

IEEE 1580;Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities

IEEE 1581;Static Component Interconnection Test Protocol and Architecture - IEEE Computer Society

IEEE 1584 INT 1-3;Guide for Performing Arc-Flash Hazard Calculations

IEEE 1584 INT;Guide for Performing Arc-Flash Hazard Calculations

IEEE 1584.1;Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584â„¢

IEEE 1584;Guide for Performing Arc-Flash Hazard Calculations - Includes Access to Additional Content

IEEE 1584A;Guide for Performing Arc-Flash Hazard Calculations-Amendment 1 - Includes Access to Additional Content.

IEEE 1584B;Guide for Performing Arc-Flash Hazard Calculations Amendment 2: Changes to Clause 4

IEEE 1585;Guide for the Functional Specification of Medium Voltages (1-35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations

IEEE 1588 INT 1-10;A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

IEEE 1588;A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems

IEEE 1590;Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems

IEEE 1591.1;Testing and Performance of Hardware for Optical Ground Wire (OPGW)

IEEE 1591.3;Qualifying Hardware for Helically-Applied Fiber Optic Cable Systems (WRAP Cable)

IEEE 15939;Adoption of ISO IEC 15939:2007-Systems and Software Engineering-Measurement Process - IEEE Computer Society

IEEE 1594;Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines

IEEE 1596.3;Standard for Low-Voltage Differential Signals (LVDS) for Scalable Coherent Interface (SCI) - IEEE Computer Society Document

IEEE 1596.4;Standard for High-Bandwidth Memory Interface Based on Scalable Coherent Interface (SCI) Signaling Technology (Ramlink) - IEEE Computer Society Document

IEEE 1596.5;IEEE Standard for Shared-Data Formats Optimized for Scalable Coherent Interface (SCI) Processors - IEEE Computer Society Document

IEEE 1596;Standard for Scalable Coherent Interface (SCI) - IEEE Computer Society Document

IEEE 1597.1;Validation of Computational Electromagnetics Computer Modeling and Simulations

IEEE 1597.2;Recommended Practice for Validation of Computational Electromagnetics Computer Modeling and Simulations

IEEE 1599;Recommended Practice for Defining a Commonly Acceptable Musical Application Using XML - IEEE Computer Society

IEEE 16;Standard for Electrical and Electronic Control Apparatus on Rail Vehicles

IEEE 1601;Trial-Use Standard for Optical AC Current and Voltage Sensing Systems

IEEE 1603;IEEE Standard for an Advanced Library Format (ALF) Describing Integrated Circuit (IC) Technology, Cells, and Blocks - IEEE Computer Society document

IEEE 16085;Systems and software engineering Life cycle processes Risk management - IEEE Computer Society Document

IEEE 1609.0;Guide for Wireless Access in Vehicular Environments (WAVE) Architecture

IEEE 1609.1;Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) Resource Manager

IEEE 1609.11;Wireless Access in Vehicular Environments (WAVE)- Over-the-Air Electronic Payment Data Exchange Protocol for Intelligent Transportation Systems (ITS)

IEEE 1609.12;Wireless Access in Vehicular Environments (WAVE) - Identifier Allocations

IEEE 1609.2;Wireless Access in Vehicular Environments-Security Services for Applications and Management Messages

IEEE 1609.3 CORR 1;Wireless Access in Vehicular Environments (WAVE)-Networking Services Corrigendum 1: Miscellaneous Corrections

IEEE 1609.3;Wireless Access in Vehicular Environments (WAVE)-Networking Services

IEEE 1609.4;Wireless Access in Vehicular Environments (WAVE)-Multi-channel Operation

IEEE 161;STANDARD DEFINITIONS ON ELECTRON TUBES

IEEE 1610;Guide for the Application of Faulted Circuit Indicators for 200   600 A, Three-phase Underground Distribution

IEEE 1613 INT 1;Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations

IEEE 1613.1;Environmental and Testing Requirements for Communications Networking Devices Installed in Transmission and Distribution Facilities

IEEE 1613;Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations

IEEE 1613A;Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations Amendment 1: Adding of one Definition, dc power supply requirements (5.1), and Annex E-History

IEEE 1615;Recommended Practice for Network Communication in Electric Power Substations

IEEE 1616;Standard for Motor Vehicle Event Data Recorders (MVEDRs)

IEEE 1616A;Motor Vehicle Event Data Recorders (MVEDRs) Amendment 1: MVEDR Connector Lockout Apparatus (MVEDRCLA)

IEEE 1617;Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium-Voltage Underground Cables

IEEE 1619.1;Standard for Authenticated Encryption with Length Expansion for Storage Devices - IEEE Computer Society

IEEE 1619.2;Wide-Block Encryption for Shared Storage Media - IEEE Computer Society

IEEE 1619;Standard for Cryptographic Protection of Data on Block-Oriented Storage Devices - IEEE Computer Society

IEEE 162;STANDARD DEFINITIONS OF TERMS FOR ELECTRONIC DIGITAL COMPUTERS

IEEE 1620.1;IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators - IEEE Computer Society

IEEE 1620;Test Methods for the Characterization of Organic Transistors and Materials - IEEE Computer Society

IEEE 1621;User Interface Elements in Power Control of Electronic Devices Employed in Office Consumer Environments - IEEE Computer Society

IEEE 1622;Electronic Distribution of Blank Ballots for Voting Systems - IEEE Computer Society

IEEE 1623;IEEE Guide for the Functional Specification of Medium Voltage (1 kV35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation

IEEE 1624;Organizational Reliability Capability

IEEE 1625;Rechargeable Batteries for Multi-Cell Mobile Computing Devices

IEEE 1628;Recommended Practice for Maintenance of DC Overhead Contact Systems for Transit Systems

IEEE 1629;Performance of DC Overhead Current Collectors for Rail Transit Vehicles

IEEE 1630;Supporting Structures for Overhead Contact Systems for Transit Systems

IEEE 1631;Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA

IEEE 16326;Systems and software engineering - Life cycle processes - Project management

IEEE 1633;Recommended Practice on Software Reliability

IEEE 1635;Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications

IEEE 1636.1;Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)

IEEE 1636.2;Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Maintenance Action Information via the Extensible Markup Language (XML)

IEEE 1636.99;Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements

IEEE 1636;Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)

IEEE 1637;Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV – 46 kV

IEEE 164;IRE STANDARDS ON ELECTRONIC COMPUTERS: METHODS OF TESTING BOBBIN CORES(62 IRE 8. S1)

IEEE 1641.1;Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition

IEEE 1641;Signal and Test Definition

IEEE 1646;Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation

IEEE 1647;the Functional Verification Language e - IEEE Computer Society

IEEE 165;STANDARD DEFINITIONS OF TERMS FOR ANALOG COMPUTERS (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 1650;Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes

IEEE 1651;Guide for Reducing Bird-Related Outages

IEEE 1652;The Application of Free Field Acoustic Reference to Telephony Measurements

IEEE 1653.2;Uncontrolled Traction Power Rectifiers for Substation Applications Up to 1500 V DC Nominal Output

IEEE 1653.3;Guide for Rail Transit Traction Power Systems Modeling

IEEE 1653.4;DC Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 V DC Nominal

IEEE 1653.6;Trial-Use Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities

IEEE 1654;RF Protection of Personnel Working in the Vicinity of Wireless Communications Antennas Attached to Electric Power Line Structures

IEEE 1656;Guide for Testing the Electrical, Mechanical, and Durability Performance of Wildlife Protective Devices on Overhead Power Distribution Systems Rated up to 38 kV

IEEE 1657;Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries

IEEE 1658;Terminology and Test Methods of Digital-to-Analog Converter Devices

IEEE 166;Standard Definitions of Terms for Hybrid Computer Linkage Components

IEEE 1660;Guide for Application and Management of Stationary Batteries Used in Cycling Service

IEEE 1661;IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems

IEEE 1662;Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships

IEEE 1665;Guide for the Rewind of Synchronous Generators, 50 Hz and 60 Hz, Rated 1 MVA and Above

IEEE 1666;Standard SystemC Language Reference Manual - IEEE Computer Society

IEEE 1667;Authentication in Host Attachments of Transient Storage Devices - IEEE Computer Society

IEEE 167;TEST PROCEDURE FOR FACSIMILE

IEEE 1671.1;Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML: Exchanging Test Descriptions

IEEE 1671.2;Automatic Test Markup Language (ATML) Instrument Description

IEEE 1671.3;IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via eXtensible Markup Language (XML): Exchanging Unit Under Test (UUT) Description Information

IEEE 1671.4;Automatic Test Markup Language (ATML) Test Configuration

IEEE 1671.5;Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML: Exchanging Test Adapter Information

IEEE 1671.6;Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML: Exchanging Test Station Information

IEEE 1671;Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML

IEEE 1672 CORR 1;Ultrawideband Radar Definitions Corrigendum 1

IEEE 1672;Ultrawideband Radar Definitions

IEEE 1675;Broadband over Power Line Hardware

IEEE 1676;Guide for Control Architecture for High Power Electronics (1 MW and Greater) Used in Electric Power Transmission and Distribution Systems

IEEE 1679;Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications

IEEE 167A.1;Facsimile Test Chart: Bi-level (Black and White)

IEEE 167A.2;Standard Facsimile Test Chart: High Contrast (Gray Scale)

IEEE 167A.3;Standard Facsimile Color Test Chart

IEEE 168;STANDARD DEFINITIONS OF TERMS ON FACSIMILE

IEEE 1680 INT 1-2;Environmental Assessment of Electronic Products - IEEE Computer Society

IEEE 1680.1;Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays - IEEE Computer Society

IEEE 1680.2;Environmental Assessment of Imaging Equipment - IEEE Computer Society

IEEE 1680.3;Environmental Assessment of Televisions - IEEE Computer Society

IEEE 1680;IEEE Standard for Environmental Assessment of Electronic Products - IEEE Computer Society

IEEE 1682;Trial-Use Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations

IEEE 1685 INT 1;IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tools Flows - IEEE Computer Society

IEEE 1685;IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows - IEEE Computer Society

IEEE 1686;Substation Intelligent Electronic Devices (IEDs) Cyber Security Capabilities

IEEE 1692;Guide for the Protection of Communication Installations from Lightning Effects

IEEE 1698;Guide for the Calculation of Braking Distances for Rail Transit Vehicles

IEEE 170;STANDARD DEFINITIONS OF TERMS FOR MODULATION SYSTEMS

IEEE 1701;Optical Port Communication Protocol to Complement the Utility Industry End Device Data Tables

IEEE 1702;Telephone Modem Communication Protocol to Complement the Utility Industry End Device Data Tables

IEEE 1703;Local Area Network Wide Area Network (LAN WAN) Node Communication Protocol to Complement the Utility Industry End Device Data Tables

IEEE 1709;Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships

IEEE 171;STANDARDS ON INFORMATION THEORY: DEFINITION OF TERMS

IEEE 1711;Trial-Use Standard for a Cryptographic Protocol for Cyber Security of Substation Serial Links

IEEE 1717;Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol

IEEE 1718;Guide for Temperature Monitoring of Cable Systems

IEEE 172;Standard Definitions of Navigation Aid Terms

IEEE 1720;Recommended Practice for Near-Field Antenna Measurements

IEEE 1722.1;Device Discovery, Connection Management, and Control Protocol for IEEE 1722 Based Devices - IEEE Computer Society

IEEE 1722;Layer 2 Transport Protocol for Time-Sensitive Applications in Bridged Local Area Networks - IEEE Computer Society

IEEE 1724;Guide for the Preparation of a Transmission Line Design Criteria Document

IEEE 1725;Rechargeable Batteries for Cellular Telephones

IEEE 1726;Functional Specification of Fixed-Series Capacitor Banks for Transmission System Applications

IEEE 1727;Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage

IEEE 173;Standards on Navigation Aids: Direction Finder Measurements - Correction

IEEE 1730.1;Recommended Practice for Distributed Simulation Engineering and Execution Process Multi-Architecture Overlay (DMAO) - IEEE Computer Society

IEEE 1730;Recommended Practice for Distributed Simulation Engineering and Execution Process (DSEEP) - IEEE Computer Society

IEEE 1733;Layer 3 Transport Protocol for Time-Sensitive Applications in Local Area Networks - IEEE Computer Society

IEEE 1734;Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs - IEEE Computer Society

IEEE 1754;Standard for a 32-Bit Microprocessor Architecture - IEEE Computer Society Document

IEEE 176;Standard on Piezoelectricity

IEEE 177;STANDARD DEFINITIONS AND METHODS OF MEASUREMENT FOR PIEZOELECTRIC VIBRATORS

IEEE 1775;Power Line Communication Equipment-Electromagnetic Compatibility (EMC) Requirements-Testing and Measurement Methods

IEEE 1776;Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form- Wound Pre-Insulated Stator Coils for Machines Rated 15 000 V and Below

IEEE 1783;Guide for Test Methods and Procedures to Evaluate the Electrical Performance of Insulators in Freezing Conditions

IEEE 1785.1;Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and Above - Part 1: Frequency Bands and Waveguide Dimensions

IEEE 1786;Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear Facilities

IEEE 1792;Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability

IEEE 1793;Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission Lines

IEEE 1799;Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings

IEEE 18;Shunt Power Capacitors

IEEE 180;STANDARD DEFINITIONS OF PRIMARY FERROELECTRIC TERMS

IEEE 1800;SystemVerilog-Unified Hardware Design, Specification, and Verification Language - IEEE Computer Society

IEEE 1801;Design and Verification of Low-Power Integrated Circuits - IEEE Computer Society

IEEE 1808;Guide for Collecting and Managing Transmission Line Inspection and Maintenance Data

IEEE 181;Transitions, Pulses, and Related Waveforms

IEEE 1815;Electric Power Systems Communications-Distributed Network Protocol (DNP3)

IEEE 1816;Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories

IEEE 1826;Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW

IEEE 182A;DEFINITIONS OF TERMS FOR RADIO TRANSMITTERS

IEEE 183;IRE TECHNICAL COMMITTEE REPORT: METHODS FOR TESTING RADIOTELEGRAPH TRANSMITTERS (BELOW 50 MC)

IEEE 184;TEST PROCEDURE FOR FREQUENCY-MODULATED MOBILE COMMUNICATIONS RECEIVERS

IEEE 185;STANDARD METHODS OF TESTING FREQUENCY MODULATION BROADCAST RECEIVERS

IEEE 1850;Property Specification Language (PSL) - IEEE Computer Society

IEEE 1851;Design Criteria of Integrated Sensor-Based Test Applications for Household Appliances - IEEE Computer Society

IEEE 1857.2;Advanced Audio Coding - IEEE Computer Society

IEEE 1857.3;Systems of Advanced Audio and Video Coding - IEEE Computer Society

IEEE 1857;Advanced Audio and Video Coding - IEEE Computer Society

IEEE 1857A;Advanced Audio and Video Coding Amendment 1: Extension on Timing and Location Information to Support Object Tracking across Multiple Cameras at Surveillance High Group - IEEE Computer Society

IEEE 186;Standard Methods of Testing Amplitude-Modulation Broadcast Receivers

IEEE 187 ERTA;Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz

IEEE 187;Standard for Measurement Methods of Emissions from FM and Television Broadcast Receivers in the Frequency Range of 9 kHz to 40 GHz

IEEE 1874;Documentation Schema for Repair and Assembly of Electronic Devices

IEEE 1888.2;Ubiquitous Green Community Control Network: Heterogeneous Networks Convergence and Scalability

IEEE 1888.3;Ubiquitous Green Community Control Network: Security

IEEE 1888;Ubiquitous Green Community Control Network Protocol

IEEE 189;STANDARD METHOD OF TESTING RECEIVERS EMPLOYING FERRITE CORE LOOP ANTENNAS

IEEE 190;STANDARDS ON TELEVISION: METHODS OF TESTING MONOCHROME TELEVISION BROADCAST RECEIVERS

IEEE 1900.1;Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management

IEEE 1900.1A;Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management Amendment 1: Addition of New Terms and Associated Definitions

IEEE 1900.2;IEEE Recommended Practice for the Analysis of In-Band and Adjacent Band Interference and Coexistence Between Radio Systems

IEEE 1900.4.1;Interfaces and Protocols Enabling Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Networks

IEEE 1900.4;Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks

IEEE 1900.4A;Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks Amendment 1: Architecture and Interfaces for Dynamic Spectrum Access Networks in White Space Frequency Bands

IEEE 1900.5;Policy Language Requirements and System Architectures for Dynamic Spectrum Access Systems

IEEE 1900.6;Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and Other Advanced Radio Communication Systems

IEEE 1900.6A;Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and Other Advanced Radio Communication Systems Amendment 1: Procedures, Protocols, and Data Archive Enhanced Interfaces

IEEE 1901.2;Low-Frequency (less than 500kHz) Narrowband Power Line Communications for Smart Grid Applications

IEEE 1901;Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications

IEEE 1902.1;Long Wavelength Wireless Network Protocol

IEEE 1903;The Functional Architecture of Next Generation Service Overlay Networks

IEEE 1904.1;Service Interoperability in Ethernet Passive Optical Networks (SIEPON)

IEEE 1905.1;A Convergent Digital Home Network for Heterogeneous Technologies

IEEE 192;STANDARDS ON RECORDING AND REPRODUCING: METHODS OF CALIBRATION OF MECHANICALLY- RECORDED LATERAL FREQUENCY RECORDS, 1958

IEEE 193;STANDARD METHOD FOR MEASUREMENT OF WEIGHTED PEAK FLUTTER OF SOUND RECORDING AND REPRODUCING EQUIPMENT

IEEE 194;STANDARD PULSE TERMS AND DEFINITIONS

IEEE 196;STANDARDS ON TRANSDUCERS: DEFINITIONS OF TERMS

IEEE 199;IRE Standards on Letter Symbols and Mathematical Signs, 1948 - Reprinted 1957

IEEE 200;Reference Designations for Electrical and Electronics Parts and Equipments

IEEE 2000.1;Standard for Year 2000 Terminology - IEEE Computer Society Document

IEEE 2000.2;Recommended Practice for Information Technology - Year 2000 Test Methods - IEEE Computer Society Document

IEEE 20000-1;Adoption of ISO IEC 20000-1:2011, Information technology-Service management-Part 1: Service management system requirements - IEEE Computer Society

IEEE 20000-2;Adoption of ISO IEC 20000-2:2012, Information technology-Service management - Part 2: Guidance on the application of service management systems - IEEE Computer Society

IEEE 2001;Recommended Practice for the InternetWeb Site Engineering, Web Site Management, and Web Site Life Cycle - IEEE Computer Society Document

IEEE 2003.1;Standard for Information Technology Test Methods for Measuring Conformance to POSIX Part 1: System Interfaces - IEEE COMPUTER SOCIETY DOC; ISO IEC 14515-1: 2000; Amendment 3 30 2000

IEEE 2003.1-1992  INT;IEEE Standards Interpretations for IEEE Std 1003.1 - 1990 and IEEE Std 2003.1 - 1992 - IEEE Copmuter Society Document

IEEE 2003.1B;Information Technology - Portable Operating System Interface (POSIX) - Part 1: System Interfaces Amendment 1: Realtime Extension (C Language) - IEEE Computer Society

IEEE 2003.2;Standard for Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities Interfaces - IEEE Computer Society Document

IEEE 2003;Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards - IEEE Computer Society Document

IEEE 201;STANDARD DEFINITIONS OF TERMS RELATING TO TELEVISION

IEEE 2010;Recommended Practice for Neurofeedback Systems

IEEE 202;STANDARDS ON TELEVISON: METHODS OF MEASUREMENT OF ASPECT RATIO AND GEOMETRIC DISTORTION

IEEE 2030.5;Adoption of ZigBee 13-0200-00-Smart Energy Profile 2.0 Application Protocol Standard

IEEE 2030;Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads

IEEE 205;Standard on Television: Measurement of Luminance Signal Levels

IEEE 206;Standards on Television: Measurement of Differential Gain and Differential Phase

IEEE 208;Video Techniques: Measurement of Resolution of Camera Systems, 1993 Techniques

IEEE 21;GENERAL REQUIREMENTS AND TEST PROCEDURE FOR OUTDOOR APPARATUS BUSHINGS

IEEE 211;Standard Definitions of Terms for Radio Wave Propagation

IEEE 213;Standard Procedure for Measuring Conducted Emissions in the Range of 300 kHz to 25 MHz from Television and FM Broadcast Receivers to Power Lines

IEEE 214;CONSTRUCTION DRAWINGS OF LINE IMPEDANCE NETWORK REQUIRED FOR MEASUREMENT OF CONDUCTED INTERFERENCE TO THE POWER LINE FROM FM AND TELEVISION BROADCAST RECEIVERS IN THE RANGE OF 300 KHZ TO 25 MHZ AS SPECIFIED IN IEEE STD 213-1961

IEEE 21450;A Smart Transducer Interface for Sensors and Actuators-Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 21451-1;A Smart Transducer Interface for Sensors and Actuators-Network Capable Application Processor (NCAP) Information Model

IEEE 21451-2;A Smart Transducer Interface for Sensors and Actuators- Transducer to Microprocessor Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 21451-4;A Smart Transducer Interface for Sensors and Actuators-Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

IEEE 21451-7;Information technology - Smart transducer interface for sensors and actuators - Part 7: Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats

IEEE 216;STANDARDS ON SOLID STATE DEVICES: DEFINITIONS OF SEMICONDUCTOR TERMS

IEEE 218;STANDARD METHODS OF TESTING TRANSISTORS

IEEE 219;RECOMMENDED PRACTICE FOR LOUDSPEAKER MEASUREMENTS

IEEE 2200;Protocol for Stream Management in Media Client Devices - IEEE Computer Society

IEEE 22A;GUIDE FOR THE APPLICATION OF INTERRUPTER SWITCHES TO SWITCH CAPACITANCE LOADS

IEEE 24;STANDARD PERFORMANCE CHARACTERISTICS AND DIMENSIONS FOR OUTDOOR APPARATUS BUSHINGS

IEEE 241;Recommended Practice for Electric Power Systems in Commercial Buildings - IEEE Gray Book (Color Book Series)

IEEE 242 ERTA;Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems

IEEE 242;Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems - IEEE Buff Book (Color Book Series)

IEEE 24748-1;Guide-Adoption of ISO IEC TR 24748-1:2010 Systems and Software Engineering-Life Cycle Management-Part 1: Guide for Life Cycle Management - IEEE Computer Society

IEEE 24748-2;Guide-Adoption of ISO IEC TR 24748-2:2011 Systems and Software Engineering-Life Cycle Management-Part 2: Guide to the Application of ISO IEC 15288 (System Life Cycle Processes) - IEEE Computer Society

IEEE 24748-3;Guide-Adoption of ISO IEC TR 24748-3:2011 Systems and Software Engineering-Life Cycle Management-Part 3: Guide to the Application of ISO IEC 12207 (Software Life Cycle Processes) - IEEE Computer Society

IEEE 24765;Systems and software engineering - Vocabulary - IEEE Computer Society

IEEE 24774;Guide-Adoption of ISO IEC TR 24774:2010 Systems and Software Engineering-Life Cycle Management-Guidelines for Process Description - IEEE Computer Society

IEEE 251;GUIDE: TEST PROCEDURES FOR DIRECT-CURRENT TACHOMETER GENERATORS

IEEE 252;Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

IEEE 255;LETTER SYMBOLS FOR SEMICONDUCTOR DEVICES; ERRATA

IEEE 257;TECHNICAL COMMITTEE REPORT ON RECOMMENDED PRACTICES FOR BURST MEASUREMENTS IN THE TIME DOMAIN

IEEE 258;TEST PROCEDURE FOR CLOSE-TALKING PRESSURE- TYPE MICROPHONES

IEEE 259;Standard Test Procedure for Evaluation of Systems of Insulation for Dry-Type Specialty and General-Purpose Transformers

IEEE 260.1;Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)

IEEE 260.3;American National Standard Mathematical Signs and Symbols for Use in Physical Sciences and Technology

IEEE 260.4;American National Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics

IEEE 2600.1;A Protection Profile in Operational Environment A - IEEE Computer Society

IEEE 2600.2;Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment B - IEEE Computer Society

IEEE 2600.3;Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment C - IEEE Computer Society

IEEE 2600.4;Protection Profile for Hardcopy Devices in IEEE Std 2600-2008 Operational Environment D - IEEE Computer Society

IEEE 2600;Information Technology: Hardcopy Device and System Security - IEEE Computer Society

IEEE 261;LETTER SYMBOLS FOR THERMOELECTRIC DEVICES

IEEE 263;STANDARD FOR MEASUREMENT OF RADIO NOISE GENERATED BY MOTOR VEHICLES AND AFFECTING MOBILE COMMUNICATIONS RECEIVERS IN THE FREQUENCY RANGE 25 TO 1000 MEGACYCLES PER SECOND

IEEE 264;STANDARD FOR HIGH-POWER WIDE-BAND TRANSFORMERS (100 WATTS AND ABOVE)

IEEE 265;TECHNICAL REPORT ON RECOMMENDED PRACTICES FOR BURST MEASUREMENTS IN THE FREQUENCY DOMAIN

IEEE 26511;Systems and software engineering - Requirements for managers of user documentation - IEEE Computer Society

IEEE 26512;Systems and software engineering - Requirements for acquirers and suppliers of user documentation - IEEE Computer Society

IEEE 26513;Adoption of ISO IEC 26513:2009 Systems and Software Engineering-Requirements for Testers and Reviewers of Documentation - IEEE Computer Society

IEEE 26514;Adoption of ISO IEC 26514:2008 Systems and Software Engineering-Requirements for Designers and Developers of User Documentation - IEEE Computer Society

IEEE 26515;Systems and software engineering - Developing user documentation in an agile environment - IEEE Computer Society

IEEE 266;TEST PROCEDURE FOR EVALUATION OF INSULATION SYSTEMS FOR ELECTRONICS POWER TRANSFORMERS

IEEE 267;Proposed Recommended Practice for the Preparation and Use of Symbols - Published for Trial Use

IEEE 268;American National Standard for Metric Practice

IEEE 268A;INTERNATIONAL SYSTEM OF UNITS (SI) CONVERSION FACTORS

IEEE 269;Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets

IEEE 269A;Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets Amendment 1

IEEE 27;STANDARD FOR SWITCHGEAR ASSEMBLIES INCLUDING METAL-ENCLOSED BUS; CONSOLIDATED EDITION; SUPPLEMENTS C37.20A, C37.20B AND C37.20C

IEEE 270;Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)

IEEE 271 TRIAL-USE;Technical Report on Switching Surge Testing of Extra-High-Voltage Switches

IEEE 272;STANDARD FOR COMPUTER- TYPE (SQUARE-LOOP) PULSE TRANSFORMERS

IEEE 274;STANDARD DEFINITIONS OF TERMS FOR INTEGRATED ELECTRONICS

IEEE 275;Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below

IEEE 277;Recommended Practice for Cement Plant Power Distribution

IEEE 279;Criteria for Protection Systems for Nuclear Power Generating Stations

IEEE 280;Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering

IEEE 281;Standard Service Conditions for Power System Communication Equipment

IEEE 282;SPEED GOVERNING AND TEMPERATURE PROTECTION OF GAS TURBINES INTENDED TO DRIVE ELECTRIC GENERATORS

IEEE 284;STANDARDS REPORT STATE-OF-THE-ART OF MEASURING FIELD STRENGTH CONTINUOUS WAVE, SINUSOIDAL

IEEE 286;Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation

IEEE 287;Precision Coaxial Connectors (DC to 110 GHz)

IEEE 290;STANDARD FOR ELECTRIC COUPLINGS PART I - GENERAL, RATING, PERFORMANCE CHARACTERISTICS PART II - TEST PROCEDURES - DOCUMENT NOT AVAILABLE

IEEE 291;Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz

IEEE 29119-1;Software and systems engineering - Software testing - Part 1: Concepts and definitions

IEEE 29119-2;Software and systems engineering - Software testing - Part 2: Test processes

IEEE 29119-3;Software and systems engineering - Software testing - Part 3: Test documentation

IEEE 29148;Systems and software engineering - Life cycle processes - Requirements engineering - IEEE Computer Society

IEEE 292 ERTA;Errata to Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros

IEEE 292;Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros

IEEE 293;Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros

IEEE 295;Standard for Electronics Power Transformers

IEEE 296;STANDARD DEFINITIONS OF TERMS, LETTER SYMBOLS, AND COLOR CODE FOR HALL EFFECT DEVICES

IEEE 297;RECOMMENDED PRACTICE FOR SPEECH QUALITY MEASUREMENTS

IEEE 298;GUIDE FOR CALCULATING LOSSES IN ISOLATED-PHASE BUS

IEEE 299.1;Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m

IEEE 299;Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures

IEEE 3;RECOMMENDED PRACTICE IN THE SELECTION OF REFERENCE AMBIENT CONDITIONS FOR TEST MEASUREMENTS OF ELECTRICAL APPARATUS

IEEE 300;Standard Test Procedures for Semiconductor Charged-Particle Detectors

IEEE 3001.5;Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems

IEEE 3001.8;Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems

IEEE 3004.1;Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems

IEEE 3005.3;Recommended Practice for the Application of Stored-Energy Systems for use in Emergency and Stand-By Power Systems - Availability is Unknown

IEEE 3005.4;Recommended Practice for Improving the Reliability of Emergency and Stand-By Power Systems - Availability is Unknown

IEEE 3005.7;Recommended Practice for the Application of Metering for Energy Management of Industrial and Commercial Power Systems - Availability is Unknown

IEEE 3006.5;Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems - Availability is Unknown

IEEE 3006.7;Recommended Practice for Determining the Reliability of 7×24 Continuous Power Systems in Industrial and Commercial Facilities

IEEE 3006.8;Recommended Practice for Analyzing Reliability Data for Equipment Used in Industrial and Commercial Power Systems - Availability is Unknown

IEEE 3006.9;Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems

IEEE 3006;Historical Reliability Data for IEEE 3006 Standards: Power Systems Reliability

IEEE 3007.1;Recommended Practice for the Operation and Management of Industrial and Commercial Power Systems

IEEE 3007.2;Recommended Practice for the Maintenance of Industrial and Commercial Power Systems

IEEE 3007.3;Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems - IEEE Yellow Book

IEEE 301;Standard Test Procedures for Amplifiers and Preamplifiers Used with Detectors of Ionizing Radiation

IEEE 302;STANDARD METHODS FOR MEASURING ELECTROMAGNETIC FIELD STRENGTH FOR FREQUENCIES BELOW 1000 MHZ IN RADIO WAVE PROPAGATION

IEEE 303;Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations

IEEE 304;Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current Machines

IEEE 305;GUIDE FOR PROTECTIVE RELAY APPLICATIONS OF AUDIO TONES OVER TELEPHONE CHANNELS

IEEE 306;TEST PROCEDURE FOR CHARGING INDUCTORS

IEEE 307;STANDARD DEFINITIONS OF TERMS FOR SOLAR CELLS

IEEE 308;Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations

IEEE 309;Standard Test Procedures and Basis for Geiger-Mueller Counters - ANSI N42.3:1999

IEEE 310;STANDARD FOR REFERENCE- STANDARD ELECTRICAL RESISTORS

IEEE 311;STANDARD SPECIFICATION OF GENERAL-PURPOSE LABORATORY CATHODE-RAY OSCILLOSCOPES

IEEE 312;STANDARD DEFINITIONS OF TERMS FOR COMMUNICATION SWITCHING

IEEE 31320-1;Information technology - Modeling Languages - Part 1: Syntax and Semantics for IDEF0

IEEE 31320-2;Information technology - Modeling Languages - Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)

IEEE 314;STANDARDS REPORT ON STATE OF THE ART OF MEASURING UNBALANCED TRANSMISSION- LINE IMPEDANCE

IEEE 315;Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Class Designation Letters) - CSA Z99-75; Includes supplement to ANSI Y32.2-75 and IEEE 315-75

IEEE 315A SUPP;Supplement to Graphic Symbols for Electrical and Electronics Diagrams - Supplement to ANSI Y32.2-75 and IEEE 315-75

IEEE 316;STANDARD REQUIREMENTS FOR DIRECT CURRENT INSTRUMENT SHUNTS

IEEE 317;Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations

IEEE 319;Standard on Magnetostrictive Materials: Piezomagnetic Nomenclature

IEEE 32;Requirements, Terminology, and Test Procedure for Neutral Grounding Devices

IEEE 321;See IEEE Std C37.61

IEEE 321;Standard Guide for the Application, Operation, and Maintenance of Automatic Circuit Reclosers

IEEE 323;Qualifying Class 1E Equipment for Nuclear Power Generating Stations

IEEE 325;Standard Test Procedures for Germanium Gamma-Ray Detectors

IEEE 330;See IEEE Std C37.26

IEEE 331;STANDARD APPLICATION GUIDE FOR LOW-VOLTAGE AC NON-INTEGRALLY FUSED POWER CIRCUIT BREAKERS (USING SEPARATELY MOUNTED CURRENT-LIMITING FUSES)

IEEE 333;STANDARD FOR ELECTRICAL INSTALLATIONS ON PACKAGING MACHINERY AND ASSOCIATED EQUIPMENT

IEEE 334;Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations

IEEE 336;Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities

IEEE 337;Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance Accelerometer

IEEE 338;Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems

IEEE 342A;APPLICATION GUIDE FOR CAPACITANCE CURRENT SWITCHING FOR AC HIGH- VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS

IEEE 344;Seismic Qualification of Equipment for Nuclear Power Generating Stations

IEEE 345;STANDARD TEST PROCEDURE FOR THERMAL EVALUATION OF OIL-IMMERSED DISTRIBUTION TRANSFORMERS

IEEE 346;STANDARD DEFINITIONS IN POWER OPERATIONS TERMINOLOGY INCLUDING TERMS FOR REPORTING AND ANALYZING OUTAGES OF ELECTRICAL TRANSMISSION AND DISTRIBUTION FACILITIES AND INTERRUPTIONS TO CUSTOMER SERVICE

IEEE 347;STANDARD METHOD OF MEASURING RECORDED FLUX OF MAGNETIC SOUND RECORDS AT MEDIUM WAVELENGTHS

IEEE 352;Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems

IEEE 356;Guide for Measurements of Electromagnetic Properties of Earth Media

IEEE 367;Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault

IEEE 368;RECOMMENDED PRACTICE FOR MEASUREMENT OF ELECTRICAL NOISE AND HARMONIC FILTER PERFORMANCE OF HIGH- VOLTAGE DIRECT-CURRENT SYSTEMS

IEEE 376;Standard for the Measurement of Impulse Strength and Impulse Bandwidth

IEEE 377;Recommended Practice for Measurement of Spurious Emission from Land-Mobile Communication Transmitters

IEEE 378;Network Analyzers (100 kHz to 18 GHz)

IEEE 379;Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems

IEEE 380;Definitions of Terms Used in IEEE Standards on Nuclear Power Generating Stations

IEEE 381;STANDARD CRITERIA FOR TYPE TESTS OF CLASS 1E MODULES USED IN NUCLEAR POWER GENERATING STATIONS

IEEE 382;Qualification of Safety-Related Actuators for Nuclear Power Generating Stations

IEEE 383;Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

IEEE 384;Criteria for Independence of Class 1E Equipment and Circuits

IEEE 386 INT 1;Separable Insulated Connector Systems for Power Distribution Systems Above 600 V

IEEE 386;Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V

IEEE 387;Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations

IEEE 388;Standard for Transformers and Inductors in Electronic Power Conversion Equipment

IEEE 389;Recommended Practice for Testing Electronic Transformers and Inductors

IEEE 390;Standard for Pulse Transformers

IEEE 391;STANDARD FOR HIGH-POWER (GREATER THAN 300 WATTS, PEAK) PULSE TRANSFORMERS

IEEE 392;RECOMMENDED PRACTICE FOR ACHIEVING HIGH RELIABILITY IN ELECTRONICS TRANSFORMERS AND INDUCTORS

IEEE 393;Standard for Test Procedures for Magnetic Cores

IEEE 398;Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field

IEEE 399;Recommended Practice for Industrial and Commercial Power Systems Analysis - IEEE Brown Book (Color Book Series; Best Copy Available

IEEE 4;High-Voltage Testing Techniques

IEEE 400.1;Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage

IEEE 400.2;Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) (less than 1 Hz)

IEEE 400.3;IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment

IEEE 400;Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above

IEEE 402;GUIDE FOR MEASURING RESISTIVITY OF CABLE- INSULATION MATERIALS AT HIGH DIRECT VOLTAGES

IEEE 404;Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV

IEEE 415;Guide for Planning of Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating Stations

IEEE 416;STANDARD ATLAS TEST LANGUAGE

IEEE 420;The Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations

IEEE 42010;Systems and software engineering - Architecture description

IEEE 421.1;Standard Definitions for Excitation Systems for Synchronous Machines

IEEE 421.2;Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems

IEEE 421.3;Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines

IEEE 421.4;Guide for the Preparation of Excitation System Specifications

IEEE 421.5 INT 1;Recommended Practice for Excitation System Models for Power System Stability Studies

IEEE 421.5;Recommended Practice for Excitation System Models for Power System Stability Studies

IEEE 421;STANDARD CRITERIA AND DEFINITIONS FOR EXCITATION SYSTEMS FOR SYNCHRONOUS MACHINES

IEEE 421A;GUIDE FOR IDENTIFICATION, TESTING, AND EVALUATION OF THE DYNAMIC PERFORMANCE OF EXCITATION CONTROL SYSTEMS

IEEE 421B;STANDARD FOR HIGH- POTENTIAL-TEST REQUIREMENTS FOR EXCITATION SYSTEMS FOR SYNCHRONOUS MACHINES

IEEE 422;Guide for the Design of Cable Raceway Systems for Electric Generating Facilities

IEEE 428;STANDARD DEFINITIONS AND REQUIREMENTS FOR THYRISTOR AC POWER CONTROLLERS

IEEE 429;Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below

IEEE 43;Recommended Practice for Testing Insulation Resistance of Rotating Machinery

IEEE 430;Standard Procedures for the Measurement of Radio Noise from Overhead Power Lines and Substations

IEEE 432;Guide for Insulation Maintenance for Rotating Electric Machinery (5 hp to Less Than 10 000 hp)

IEEE 433;Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency

IEEE 434;IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above

IEEE 436;Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers

IEEE 442;Guide for Soil Thermal Resistivity Measurements

IEEE 444;Standard Practices and Requirements for Thyristor Converters for Motor Drives Part I - Converters for DC Motor Armature Supplies

IEEE 446;Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications - IEEE Orange Book (Color Book Series)

IEEE 449;Standard for Ferroresonant Voltage Regulators

IEEE 45 INT 1;Recommended Practice for Electric Installations on Shipboard

IEEE 45 INT 1-2;Recommended Practice for Electric Installations on Shipboard

IEEE 45.2;Recommended Practice for Electrical Installations on Shipboard-Controls and Automation

IEEE 45.7;Recommended Practice for Electrical Installations on Shipboard-AC Switchboards

IEEE 45;Recommended Practice for Electrical Installations on Shipboard

IEEE 450;Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

IEEE 454;RECOMMENDED PRACTICE FOR THE DETECTION AND MEASUREMENT OF PARTIAL DISCHARGES (CORONA) DURING DIELECTRIC TESTS

IEEE 455;Standard Test Procedure for Measuring Longitudinal Balance of Telephone Equipment Operating in the Voice Band

IEEE 457;STANDARD DEFINITIONS OF TERMS FOR NONLINEAR, ACTIVE, AND NONRECIPROCAL WAVEGUIDE COMPONENTS

IEEE 460;STANDARD FOR ELECTRICAL MEASURING TRANSDUCER FOR CONVERTING AC ELECTRICAL QUANTITIES INTO DC ELECTRICAL QUANTITIES

IEEE 463;Electrical Safety Practices in Electrolytic Cell Line Working Zones

IEEE 464;RECOMMENDED PRACTICE FOR GROUNDED 830 V THREE- PHASE ELECTRICAL SYSTEM FOR OIL FIELD SERVICE

IEEE 467;STANDARD QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF CLASS 1E INSTRUMENTATION AND ELECTRIC EQUIPMENT FOR NUCLEAR POWER GENERATING STATIONS

IEEE 469;Recommended Practice for Voice - Frequency Electrical - Noise Tests of Distribution Transformers

IEEE 470;STANDARD APPLICATION GUIDE FOR BOLOMETRIC POWER METERS; CORRECTION - FEBRUARY 1973

IEEE 473;Recommended Practice for an Electromagnetic Site Survey (10 kHz to 10 GHz)

IEEE 474;STANDARD SPECIFICATIONS AND TEST METHODS FOR FIXED AND VARIABLE ATTENUATORS, DC TO 40 GHZ INCLUDING TRIAL-USE SECTIONS ON INSERTION- LOSS REPEATABILITY AND CHARACTERISTIC INSERTION LOSS OF A NONINSERTABLE TWO-PORT

IEEE 475;Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz

IEEE 48;Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV

IEEE 484;Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications

IEEE 485;Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications

IEEE 487.2;the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems

IEEE 487.4;The Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers

IEEE 487.5;The Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers

IEEE 487;Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Power Locations

IEEE 488.1 ERTA;Standard for Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation

IEEE 488.1;Standard for Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation

IEEE 488.2 ERTA;Standard Codes, Formats, Protocols, and Common Commands For Use with IEEE Std 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation

IEEE 488.2;Standard Codes, Formats, Protocols, and Common Commands For Use with IEEE Std 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation

IEEE 488;STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION

IEEE 488-1;Higher performance protocol for the standard digital interface for programmable instrumentation – Part 1: General - Replaces IEEE 488.2

IEEE 488-2;Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands - Replaces IEEE 488.2

IEEE 492;Guide for Operation and Maintenance of Hydro-Generators

IEEE 493;Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems - IEEE Gold Book (Color Book Series)

IEEE 494;Standard Method for Identification of Documents Related to Class 1E Equipment and Systems for Nuclear Power Generating Stations

IEEE 495;Guide for Testing Faulted Circuit Indicators

IEEE 497;Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations

IEEE 498;STANDARD REQUIREMENTS FOR THE CALIBRATION AND CONTROL OF MEASURING AND TEST EQUIPMENT USED IN NUCLEAR FACILITIES

IEEE 499;Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment

IEEE 500 P&V;Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves

IEEE 500;Guide to the Collection and Presentation of Electrical, Electronic, Sensing Component, and Mechanical Equipment Reliability Data for Nuclear-Power Generating Stations

IEEE 501;Seismic Testing of Realays

IEEE 502;Guide for Protection, Interlocking, and Control of Fossil-Fueled Unit-Connected Steam Stations

IEEE 503;STANDARD FOR MEASUREMENT AND CHARACTERIZATION OF DIODE-TYPE CAMERA TUBES

IEEE 505;Standard Nomenclature for Generating Station Electric Power Systems

IEEE 51;GUIDING PRINCIPLES for DIELECTRIC TESTS

IEEE 510;Recommended Practices for Safety in High-Voltage and High-Power Testing

IEEE 511;Video Signal Transmission Measurement of Linear Waveform Distrortion

IEEE 515.1;The Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications

IEEE 515;The Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications

IEEE 516;Guide for Maintenance Methods on Energized Power Lines

IEEE 517;Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating Gyros

IEEE 518;Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources

IEEE 519;Recommended Practice and Requirements for Harmonic Control in Electric Power Systems

IEEE 521;Standard Letter Designations for Radar-Frequency Bands

IEEE 522;Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines

IEEE 524;Guide to the Installation of Overhead Transmission Line Conductors

IEEE 525;Guide for the Design and Installation of Cable Systems in Substations

IEEE 528;Standard for Inertial Sensor Terminology

IEEE 529 ERTA;Errata to Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedures for Single-Degree-of-Freedom Rate-Intergrating Gyros

IEEE 529;Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedure for Single- Degree-of-Freedom Rate-Integrating Gyros - Supplement to IEEE Std 517-1974, R1980

IEEE 530;Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Digital, Torque-Balance Accelerometer

IEEE 532;Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables

IEEE 535;Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations

IEEE 539;Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines

IEEE 544;STANDARD FOR ELECTROTHERMIC POWER METERS

IEEE 548;Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity

IEEE 55;Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment

IEEE 551;Recommended Practice for Calculating Short- Circuit Currents in Industrial and Commercial Power Systems - IEEE Violet Book (Color Book Series)

IEEE 56;Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10,000 kVA and Larger)

IEEE 563;Guide on Conductor Self-Damping Measurements

IEEE 566;RECOMMENDED PRACTICE FOR THE DESIGN OF DISPLAY AND CONTROL FACILITIES FOR CENTRAL CONTROL ROOMS OF NUCLEAR POWER GENERATING STATIONS

IEEE 57;Test Procedure for EVALUATION of the THERMAL STABILITY of ENAMELED WIRE in AIR

IEEE 572 ERTA;Errata to Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations - Correction Sheet

IEEE 572;Qualifcation of Class 1E Connection Assemblies for Nuclear Power Generating Stations

IEEE 575;Guide for the Application of Sheath-Bonding Methods for Single- Conductor Cables and the Calculation of Induced Voltages and Currents in Cable Sheaths - Correction - December 1987

IEEE 576;Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications

IEEE 577;Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations

IEEE 58;STANDARD INDUCTION MOTOR LETTER SYMBOLS

IEEE 581;STANDARD DEFINITIONS, SYMBOLS, AND CHARACTERIZATION OF METAL-NITRIDE-OXIDE FIELD-EFFECT TRANSISTORS

IEEE 583;Standard Modular Instrumentation and Digital Interface System (CAMAC)

IEEE 586;STANDARD DEFINITIONS OF LASER-MASER TERMS

IEEE 590;Cable Plowing Guide

IEEE 592;Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors

IEEE 595;Standard Serial Highway Interface System (CAMAC)

IEEE 596;Standard Parallel Highway Interface System (CAMAC)

IEEE 597;Standard Practices and Requirements for General Purpose Thyristor DC Drives

IEEE 599;STANDARD DEFINITIONS OF POWER SYSTEMS DATA TRANSMISSION AND RELATED CHANNEL TERMINOLOGY

IEEE 602;Recommended Practice for Electric Systems in Health Care Facilities - IEEE White Book (Color Book Series)

IEEE 603;Standard Criteria for Safety Systems for Nuclear Power Generating Stations

IEEE 605 INT 1;Guide for Bus Design in Air Insulated Substations

IEEE 605;Guide for Bus Design in Air Insulated Substations

IEEE 610.10;Standard Glossary of Computer Hardware Terminology - IEEE Computer Society Document

IEEE 610.12;Standard Glossary of Software Engineering Terminology

IEEE 610.12;Standard Glossary of Software Engineering Terminology - Revision and Redesignation of IEEE Std 729-1983; Corrected Edition; IEEE Computer Society Document

IEEE 610.13;Standard Glossary of Computer Languages - IEEE Computer Society Document

IEEE 610.2;Standard Glossary of Computer Applications Terminology - IEEE Computer Society Document

IEEE 610.3;Standard Glossary of Modeling and Simulation Terminology - IEEE Computer Society Document

IEEE 610.4;Standard Glossary of Image Processing and Pattern Recognition Terminology - IEEE Computer Society Document

IEEE 610.5;Standard Glossary of Data Management Terminology

IEEE 610.6;Standard Glossary of Computer Graphics Terminology - IEEE Computer Society Document

IEEE 610.7;Standard Glossary of Computer Networking Terminology - IEEE Computer Society Document

IEEE 610;Computer Dictionary - Correction - 1991

IEEE 618;STANDARD FOR MEASUREMENT OF LUMINANCE SIGNAL-TO- NOISE RATIO IN VIDEO MAGNETIC-TAPE RECORDING SYSTEMS

IEEE 62.2;Guide for Diagnostic Field Testing of Electric Power ApparatusElectrical Machinery

IEEE 62;Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors

IEEE 620;Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines

IEEE 622;Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Stations

IEEE 62271-37-082;High-voltage switchgear and controlgear – Part 37-082: Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers

IEEE 622B;Recommended Practice for Testing and Startup Procedures for Electric Heat Tracing Systems for Power Generating Stations

IEEE 623;Graphic Symbols for Grid and Mapping Diagrams Used in Cable Television Systems

IEEE 625;Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry

IEEE 62582-1;Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 1: General

IEEE 62582-2;Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 2: Indenter modulus

IEEE 62582-3;Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 3: Elongation at break

IEEE 62582-4;Nuclear power plants – Instrumentation and control important to safety – Electrical equipment condition monitoring methods – Part 4: Oxidation induction techniques

IEEE 627;Qualification of Equipment Used in Nuclear Facilities

IEEE 628;Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations

IEEE 634;STANDARD CABLE PENETRATION FIRE STOP QUALIFICATION TEST

IEEE 634;STANDARD CABLE-PENETRATION FIRE STOP QUALIFICATION TEST

IEEE 635;Guide for Selection and Design of Aluminum Sheaths for Power Cables

IEEE 637;Guide for the Reclamation of Insulating Oil and Criteria for Its Use

IEEE 638;Qualification of Class 1E Transformers for Nuclear Power Generating Stations

IEEE 640;GUIDE FOR POWER STATION NOISE CONTROL

IEEE 641;STANDARD DEFINITIONS AND CHARACTERIZATION OF METAL NITRIDE OXIDE SEMICONDUCTOR ARRAYS

IEEE 643;Guide for Power-Line Carrier Applications

IEEE 644;Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields From AC Power Lines

IEEE 645;TEST PROCEDURES FOR HIGH- PURITY GERMANIUM DETECTORS FOR IONIZING RADIATION (SUPPLEMENT TO IEEE STD 325-1971, REAFF 1977)

IEEE 647 ERTA;Errata to Specification Format Guide and Test Procedure for Single-Axis Laser Gyros - Correction Sheet

IEEE 647;Standard Specification Format Guide and Test Procedure for Single-Axis Laser Gyros

IEEE 649;Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations

IEEE 650;Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations

IEEE 656;Standard for the Measurement of Audible Noise from Overhead Transmission Lines

IEEE 66;Guide for Determination of SHORT-CIRCUIT CHARACTERISTICS OF DIRECT-CURRENT MACHINERY

IEEE 660;STANDARD FOR SEMICONDUCTOR MEMORY TEST PATTERN LANGUAGE (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 661;Determining Objective Loudness Ratings of Telephone Connections

IEEE 662;Standard Terminology for Semiconductor Memory - IEEE Computer Society Document

IEEE 664;Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors

IEEE 665;Standard for Generating Station Grounding

IEEE 666;Design Guide for Electric Power Service Systems for Generating Stations

IEEE 668;RECOMMENDED PRACTICE FOR ELECTRICAL HEATING APPLICATIONS TO MELTING FURNACES AND FOREHEARTHS IN THE GLASS INDUSTRY

IEEE 67;Guide for Operation and Maintenance of Turbine Generators

IEEE 671 CORR 1;Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block Diagrams

IEEE 671;Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement

IEEE 675;Standard Multiple Controllers in a CAMAC Crate

IEEE 676;Guide for Alarm Monitoring and Reporting Systems for Fossil-Fueled Power Generating Stations

IEEE 680;STANDARD TECHNIQUES FOR DETERMINATION OF GERMANIUM SEMICONDUCTOR DETECTOR GAMMA-RAY EFFICIENCY USING A STANDARD MARINELLI (REENTRANT) BEAKER GEOMETRY

IEEE 683;Recommended Practice for Block Transfers in CAMAC Systems

IEEE 686;Standard Radar Definitions

IEEE 690;Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations

IEEE 691;Guide for Transmission Structure Foundation Design and Testing

IEEE 692;Standard Criteria for Security Systems for Nuclear Power Generating Stations

IEEE 693;Recommended Practice for Seismic Design of Substations

IEEE 694;Standard for Microprocessor Assembly Language - IEEE Computer Society Document

IEEE 695;Standard for Microprocessor Universal Format for Object Modules - IEEE Computer Society Document

IEEE 696;STANDARD 696 INTERFACE DEVICES (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 716;Standard Test Language for All Systems - Common Abbreviated Test Language for All Systems (C ATLAS)

IEEE 717;C ATLAS SYNTAX

IEEE 726;Standard Real-Time BASIC for CAMAC

IEEE 728;RECOMMENDED PRACTICE FOR CODE AND FORMAT CONVENTIONS FOR USE WITH ANSI IEEE STD 488-1978, IEEE STANDARD DIGITAL INTERFACE FOR PROGRAMMABLE INSTRUMENTATION

IEEE 730.1;Guide for Software Quality Assurance Planning - Revision and Redesignation of IEEE Std 938-1986; IEEE Computer Society Document

IEEE 730;Software Quality Assurance Processes - IEEE Computer Society

IEEE 738;Calculating the Current-Temperature Relationship of Bare Overhead Conductors

IEEE 739;Recommended Practice for Energy Management in Industrial and Commercial Facilities - IEEE Bronze Book (Color Book Series)

IEEE 7-4.3.2;Standard Criteria for Digital Computers In Safety Systems Of Nuclear Power Generating Stations

IEEE 74;TEST CODE FOR INDUSTRIAL CONTROL (600 VOLTS OR LESS)

IEEE 741;Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations

IEEE 743 INT 1;Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for Telecommunications

IEEE 743;Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for Telecommunications

IEEE 746;Performance Measurements of A D and D A Converters for PCM Television Video Circuits

IEEE 748;STANDARD FOR SPECTRUM ANALYZERS

IEEE 749;STANDARD PERIODIC TESTING OF DIESEL-GENERATOR UNITS APPLIED AS STANDBY POWER SUPPLIES IN NUCLEAR POWER GENERATING STATIONS

IEEE 751;Trial-Use Design Guide for Wood Transmission Structures

IEEE 752;Standard for Functional Requirements for Methods and Equipment for Measuring the Performance of Tone Address Signaling Systems

IEEE 753;STANDARD FUNCTIONAL METHODS AND EQUIPMENT FOR MEASURING THE PERFORMANCE OF DIAL-PULSE (DP) ADDRESS SIGNALING SYSTEMS

IEEE 754;Floating-Point Arithmetic - IEEE Computer Society

IEEE 755;Trial-Use Standard for Extending High-Level Language Implementations for Microprocessors - IEEE Computer Society

IEEE 758;Standard Subroutines for Computer Automated Measurement and Control (CAMAC)

IEEE 759;Standard Test Procedures for Semiconductor X-Ray Energy Spectrometers

IEEE 76;GUIDE FOR ACCEPTANCE AND MAINTENANCE OF TRANSFORMER ASKAREL IN EQUIPMENT

IEEE 762 INT 1;Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity

IEEE 762;Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity

IEEE 765;Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)

IEEE 770X3.160;STANDARD FOR THE PROGRAMMING LANGUAGE EXTENDED PASCAL (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 770X3.97;STANDARD PASCAL COMPUTER PROGRAMMING LANGUAGE (R 1990) (IEEE COMPUTER SOCIETY DOC.)

IEEE 771;Guide to the Use of the ATLAS Specification

IEEE 775;Guide for Designing Multistress Aging Tests of Electrical Insulation in a Radiation Environment

IEEE 776;Recommended Practice for Inductive Coordination of Electric Supply and Communication Lines

IEEE 789;Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments

IEEE 790;Guide for Medical Ultrasound Field Parameter Measurements

IEEE 792;Recommended Practice for the Evaluation of the Impulse Voltage Capability of Insulation Systems for AC Electric Machinery Employing Form-Wound Stator Coils

IEEE 796;Standard Microcomputer System Bus - IEEE Computer Society Document

IEEE 799;Guide for Handling and Disposal of Transformer Grade Insulating Liquids Containing PCBs

IEEE 80 ERTA;Guide for Safety in AC Substation Grounding

IEEE 80 INT 1;Guide for Safety in AC Substation Grounding

IEEE 80;Guide for Safety in AC Substation Grounding

IEEE 80005-1;Utility connections in port – Part 1: High Voltage Shore Connection (HVSC) Systems – General requirements

IEEE 802.10;Local and Metropolitan Area Networks Interoperable LAN MAN Security (SILS) - Incorporates IEEE Std 802.10B-1992, 802.10e-1993, 802.10f-1993, 802.10g-1995, and 802.10h-1997; IEEE Computer Society Document

IEEE 802.10A;Local and Metropolitan Area Networks Interoperable LAN MAN Security (SILS) Security Architecture Framework - IEEE Computer Society Document; Supplement to 802.10-1998

IEEE 802.11;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - IEEE Computer Society

IEEE 802.11AA;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 2: MAC Enhancements for Robust Audio Video Streaming - IEEE Computer Society

IEEE 802.11AC;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz - IEEE Computer Society

IEEE 802.11AD;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 3: Enhancements for Very High Throughput in the 60 GHz Band - IEEE Computer Society

IEEE 802.11AE;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Prioritization of Management Frames - IEEE Computer Society

IEEE 802.11AF;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Television White Spaces (TVWS) Operation - IEEE Computer Society

IEEE 802.12;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 12: Demand-Priority Access Method, Physical Layer and Repeater Specifications - IEEE Computer Society Document; Incorporates IEEE 802.12-1995 and IEEE 802.12D-1997

IEEE 802.14 DRAFT3 R2;Cable-TV Access Method and Physical Layer Specification

IEEE 802.15.1;Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements Part 15.1: Wireless medium access control (MAC) and physical layer (PHY) specifications for wireless personal area networks (WPANs) - IEEE Computer Society

IEEE 802.15.2;Recommended Practice for Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements Part 15.2: Coexistence of Wireless Personal Area Networks with Other Wireless Devices Operating in Unlicensed Frequency Bands - IEEE Computer Society

IEEE 802.15.3;Standard for Information technologyTelecommunications and information exchange between systemsLocal and Metropolitan area networksSpecific requirements Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPANs) - IEEE Computer Society Document

IEEE 802.15.3B;Information technologyTelecommunications and information exchange between systemsLocal and Metropolitan area networksSpecific requirements Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPANs) - Amendment 1: May 5, 2006; IEEE Computer Society

IEEE 802.15.3C;Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPANs): Amendment 2: Millimeter-wave based Alternative Physical Layer Extension - IEEE Computer Society

IEEE 802.15.4;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) - IEEE Computer Society

IEEE 802.15.4E;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayer - IEEE Computer Society

IEEE 802.15.4F;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY) - IEEE Computer Society

IEEE 802.15.4G;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 3: Physical Layer (PHY) Specifications for Low-Data-Rate, Wireless, Smart Metering Utility Networks - IEEE Computer Society

IEEE 802.15.4J;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 4: Alternative Physical Layer Extension to Support Medical Body Area Network (MBAN) Services Operating in the 2360 MHz – 2400 MHz Band - IEEE Computer Society

IEEE 802.15.4K;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 5: Physical Layer Specifications for Low Energy, Critical Infrastructure Monitoring Networks - IEEE Computer Society

IEEE 802.15.4M;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 2: Active Radio Frequency Identification (RFID) System Physical Layer (PHY) - IEEE Computer Society

IEEE 802.15.4P;Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 7: Physical Layer for Rail Communications and Control (RCC) - IEEE Computer Society

IEEE 802.15.5;Recommended Practice for Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements Part 15.5: Mesh Topology Capability in Wireless Personal Area Networks (WPANs) - IEEE Computer Society

IEEE 802.15.6;Local and metropolitan area networks - Part 15.6: Wireless Body Area Networks - IEEE Computer Society

IEEE 802.15.7;Local and metropolitan area networks-Part 15.7: Short-Range Wireless Optical Communication Using Visible Light - IEEE Computer Society

IEEE 802.16.1;WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems - IEEE Computer Society

IEEE 802.16.1A;WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems Amendment 2: Higher Reliability Networks - IEEE Computer Society

IEEE 802.16.1B;WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems Amendment 1: Enhancements to Support Machine-to-Machine Applications - IEEE Computer Society

IEEE 802.16.2;Recommended Practice for Local and Metropolitan Area Networks Coexistence of Fixed Broadband Wireless Access Systems - IEEE Computer Society

IEEE 802.16;Air Interface for Broadband Wireless Access Systems - IEEE Computer Society

IEEE 802.16N;Air Interface for Broadband Wireless Access Systems - Amendment 2: Higher Reliability Networks - IEEE Computer Society

IEEE 802.16P;Air Interface for Broadband Wireless Access Systems - Amendment 1: Enhancements to Support Machine-to-Machine Applications - IEEE Computer Society

IEEE 802.17;Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 17: Resilient packet ring (RPR) access method and physical layer specifications - IEEE Computer Society

IEEE 802.1AB CORR 1;Local and metropolitan area networks-Station and Media Access Control Connectivity Discovery Corrigendum 1: Technical and Editorial Corrections - IEEE Computer Society

IEEE 802.1AB;Local and metropolitan area networks-Station and Media Access Control Connectivity Discovery - IEEE Computer Society

IEEE 802.1AC;Local and metropolitan area networks-Media Access Control (MAC) Service Definition - IEEE Computer Society

IEEE 802.1AE INT 1;Local and Metropolitan Area Networks - Media Access Control (MAC) Security

IEEE 802.1AE;Local and metropolitan area networks: Media Access Control (MAC) Security - IEEE Computer Society Document

IEEE 802.1AEBN;Local and metropolitan area networks-Media Access Control (MAC) Security Amendment 1: Galois Counter Mode-Advanced Encryption Standard-256 (GCM-AES-256) Cipher Suite - IEEE Computer Society

IEEE 802.1AEBW;Local and metropolitan area networks - Media Access Control (MAC) Security Amendment 2: Extended Packet Numbering - IEEE Computer Society

IEEE 802.1AG INT 1;Local and metropolitan area networks - Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management

IEEE 802.1AG;Local and metropolitan area networks - Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management - IEEE Computer Society

IEEE 802.1AH INT 1;Local and metropolitan area networks-Virtual Bridged Local Area Networks Amendment 7: Provider Backbone Bridges

IEEE 802.1AH;Local and metropolitan area networks- Virtual Bridged Local Area Networks Amendment 7: Provider Backbone Bridges - IEEE Computer Society

IEEE 802.1AR;Local and metropolitan area networks-Secure Device Identity - IEEE Computer Society

IEEE 802.1AS CORR 1;Local and metropolitan area networks- Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks- Corrigendum 1: Technical and Editorial Corrections - IEEE Computer Society

IEEE 802.1AS;Local and metropolitan area networks-Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks - IEEE Computer Society

IEEE 802.1AX INT 1;Local and metropolitan area networks - Link Aggregation

IEEE 802.1AX;Local and metropolitan area networks- Link Aggregation - IEEE Computer Society

IEEE 802.1AXBK;Local and metropolitan area networks-Link Aggregation Amendment 1: Protocol Addressing - IEEE Computer Society

IEEE 802.1BA;Local and metropolitan area networks-Audio Video Bridging (AVB) Systems - IEEE Computer Society

IEEE 802.1BR;Local and metropolitan area networks-Virtual Bridged Local Area Networks-Bridge Port Extension - IEEE Computer Society

IEEE 802.1D;Standard for Local and metropolitan area networks Media Access Control (MAC) Bridges - IEEE Computer Society Document; The 2004 revision of this standard incorporates two amendments into the 1998 Edition

IEEE 802.1H;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Technical Reports and Guidelines - Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks - IEEE Computer Society Document; ISO IEC TR 11802-5:1997

IEEE 802.1Q;Local and metropolitan area networks-Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks - IEEE Computer Society

IEEE 802.1QBP;Local and metropolitan area networks-Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks- Amendment 22: Equal Cost Multiple Path (ECMP) - IEEE Computer Society

IEEE 802.1X;Local and metropolitan area networks-Port-Based Network Access Control - IEEE Computer Society

IEEE 802.2;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 2: Logical Link Control - ISO IEC 8802-2; IEEE Computer Society Document; Incorporating 802.2c-1997, 802.2f-1997, and 802.2h-1997

IEEE 802.20.2;Conformance to IEEE 802.20 Systems-Protocol Implementation Conformance Statement (PICS) Proforma - IEEE Computer Society

IEEE 802.20.3;Minimum Performance Characteristics of IEEE 802.20 Terminals and Base Stations Access Nodes - IEEE Computer Society

IEEE 802.20;Local and metropolitan area networks Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility-Physical and Media Access Control Layer Specification - IEEE Computer Society

IEEE 802.20A;Local and metropolitan area networks-Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility-Physical and Media Access Control Layer Specification Amendment 1: Management Information Base Enhancements and Corrigenda Items - IEEE Computer Society

IEEE 802.20B;Local and metropolitan area networks-Virtual Bridged Local Area Networks Amendment 15: Bridging of IEEE 802.20 - IEEE Computer Society

IEEE 802.21;Local and metropolitan area networks- Part 21: Media Independent Handover Services - IEEE Computer Society

IEEE 802.21A;Local and metropolitan area networks-Part 21: Media Independent Handover Services Amendment 1: Security Extensions to Media Independent Handover Services and Protocol - IEEE Computer Society

IEEE 802.21B;Local and metropolitan area networks-Part 21: Media Independent Handover Services Amendment 2: Extension for Supporting Handovers with Downlink Only Technologies - IEEE Computer Society

IEEE 802.22.1;Information Technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements Part 22.1: Standard to Enhance Harmful Interference Protection for Low-Power Licensed Devices Operating in TV Broadcast Bands - IEEE Computer Society

IEEE 802.22.2;Recommended Practice for Information Technology-Telecommunications and information exchange between systems Wireless Regional Area Networks (WRAN)-Specific requirements Part 22.2: Installation and Deployment of IEEE 802.22 Systems - IEEE Computer Society

IEEE 802.22;Information Technology-Telecommunications and information exchange between systems Wireless Regional Area Networks (WRAN)-Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands - IEEE Computer Society

IEEE 802.22A;Information Technology-Telecommunications and information exchange between systems Wireless Regional Area Networks (WRAN)- Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands Amendment 1: Management and Control Plane Interfaces and Procedures and Enhancement to the Management Information Base (MIB) - IEEE Computer Society

IEEE 802.3 ERTA;Ethernet - IEEE Computer Society

IEEE 802.3.1;Management Information Base (MIB) Definitions for Ethernet - IEEE Computer Society

IEEE 802.3;Ethernet - IEEE Computer Society

IEEE 802.3BK;Ethernet Amendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks - IEEE Computer Society

IEEE 802.4;Information Processing Systems - Local Area Networks - Part 4: Token-Passing Bus Access Method and Physical Layer Specifications - First Edition; IEEE Computer Society Document; Correction Sheet - August 17, 1990

IEEE 802.4B;Local and Metropolitan Area Networks Enhancements for Physical Layer Diversity (Redundant Media Control Unit) - IEEE Computer Society Document; Supplement to ISO IEC 8802-4 : 1990; ANSI IEEE Std 802.4-1990

IEEE 802.4H;Local and Metropolitan Area Networks Alternative Use of BNC Connectors and Manchester-Encoded Signaling Methods for Single-Channel Bus Physical Layer Entities - IEEE Computer Society Document; Supplement to ISO IEC 8802-4 : 1990; ANSI IEEE Std 802.4-1990

IEEE 802.5;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Part 5: Token Ring Access Method and Physical Layer Specifications - IEEE Computer Society Document; Corrigendum 802.5w-2000; Amendment 802.5v-2001

IEEE 802.5T;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements Amendment to Part 5: Token Ring Access Method and Physical Layer Specifications - IEEE Computer Society Document

IEEE 802.5V;Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks- Specific requirements Part 5: Token Ring access method and Physical Layer specifications Amendment 5: Gigabit Token Ring operation - IEEE Computer Society Document

IEEE 802.5W;IEEE Standard for Information technology- Telecommunications and information exchange between systems- Local and metropolitan area networks Part 5: Token ring access method and Physical Layer specifications- Corrigendum 1

IEEE 802.6;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 6: Distributed Queue Dual Bus (DQDB) Access Method and Physical Layer Specifications (ISO IEC 8802-6) (IEEE Computer Society Document)

IEEE 802.6C&H SUPP;Supplement to Local and Metropolitan Area Networks: Physical Layer Convergence Procedure (PLCP) for DS1-Based Systems (Clause 12) - Supplement to ISO IEC 8802-6:1994; ANSI IEEE Std 802.6, 1994 Edition; IEEE Computer Society Document

IEEE 802.6J;Supplement to Local and Metropolitan Area Networks Connection-Oriented Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network (MAN) - IEEE Computer Society Document; Supplement to ISO IEC 8802-6:1994; ANSI IEEE 802.6, 1994 Edition

IEEE 802.7;Recommended Practices for Broadband Local Area Networks - IEEE Computer Society Document

IEEE 802.9;Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 9: Integrated Services (IS) LAN Interface at the Medium Access Control (MAC) and Physical (PHY) Layers - IEEE Computer Society Document

IEEE 802;Standard for Local and Metropolitan Area Networks: Overview and Architecture - IEEE Computer Society Document

IEEE 802A;Standard for Local and Metropolitan Area Networks: Overview and Architecture - IEEE Computer Society

IEEE 802B;Standard for Local and Metropolitan Area Networks: Overview and Architecture - IEEE Computer Society

IEEE 803.1;Recommended Practice for Unique Identification in Power Plants and Related Facilities - Component Function Identifiers - Revision and Redesignation of IEEE Std 803A - 1983

IEEE 803;Recommended Practice for Unique Identification in Power Plants and Related Facilities - Principles and Definitions

IEEE 803A;RECOMMENDED PRACTICE FOR UNIQUE IDENTIFICATION IN POWER PLANTS AND RELATED FACILITIES - COMPONENT FUNCTION IDENTIFIERS

IEEE 804;Recommended Practice for Implementation of Unique Identification in Power Plants and Related Facilities

IEEE 805;Recommended Practice for System Identification in Nuclear Power Plants and Related Facilities

IEEE 806;RECOMMENDED PRACTICE FOR SYSTEM IDENTIFICATION IN FOSSIL-FUELED POWER PLANTS AND RELATED FACILITIES

IEEE 807;Recommended Practice for Unique Identification in Hydroelectric Facilities

IEEE 81.2;Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems

IEEE 81;Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System

IEEE 810;Standard for Hydraulic Turbine and Generator Integrally Forged Shaft Couplings and Shaft Runout Tolerances

IEEE 812;Standard Definitions of Terms Relating to Fiber Optics

IEEE 813 ERTA;Errata to Specification Format Guide and Test Procedure for Two-Degree-of Freedom Dynamically Tuned Gyros - Correction Sheet

IEEE 813;Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned Gyros

IEEE 816;GUIDE FOR DETERMINING THE SMOKE GENERATION OF SOLID MATERIALS USED FOR INSULATIONS AND COVERINGS OF ELECTRIC WIRE AND CABLE

IEEE 817;Standard Test Procedure for Flame-Retardant Coatings Applied to Insulated Cables in Cable Trays

IEEE 82 ERTA;Errata to IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors

IEEE 82;Test Procedure for Impulse Voltage Tests on Insulated Conductors

IEEE 820;Standard Telephone Loop Performance Characteristics

IEEE 823;STANDARD METHODOLOGIES FOR SPECIFYING VOICEGRADE CHANNEL TRANSMISSION PARAMETERS AND EVALUATING CONNECTION TRANSMISSION PERFORMANCE FOR SPEECH TELEPHONY

IEEE 824;Standard for Series Capacitor Banks in Power Systems

IEEE 828;Configuration Management in Systems and Software Engineering - IEEE Computer Society

IEEE 829;Standard for Software and System Test Documentation - IEEE Computer Society

IEEE 83;Test Procedure for Radial Power Factor Tests on Insulating Tapes in Paper-Insulated Power Cable

IEEE 830;Recommended Practice for Software Requirements SpeciÞcations - IEEE Computer Society

IEEE 833;Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards

IEEE 835 INTRO;Standard Power Cable Ampacity Tables

IEEE 835 PG 1 - 72;Standard Power Cable Ampacity Tables - 0.6 to 5 kV Unshielded Single Conductor Extruded Dielectric Cable

IEEE 835 PG 1025 - 1170;Standard Power Cable Ampacity Tables - 69 kV Shielded Single Conductor Unfilled X L P E Power Cable

IEEE 835 PG 1171 - 1316;Standard Power Cable Ampacity Tables - 115 to 138 kV Shielded Single Conductor Unfilled X L P E Power Cable

IEEE 835 PG 1317 - 1462;Standard Power Cable Ampacity Tables - 69 kV Shielded Single Conductor Filled X L P E or E P R Power Cable

IEEE 835 PG 1463 - 1608;Standard Power Cable Ampacity Tables - 115 to 138 kV Shielded Single Conductor Filled X L P E or E P R Power Cable

IEEE 835 PG 1609 - 1676;Standard Power Cable Ampacity Tables - 5 kV Shielded Three Conductor Extruded Dielectric Cable

IEEE 835 PG 1677 - 1744;Standard Power Cable Ampacity Tables - 15 kV Shielded Three Conductor Extruded Dielectric Cable

IEEE 835 PG 1745 - 1826;Standard Power Cable Ampacity Tables - 5 kV Single Conductor Solid Type Paper Lead Sheathed Power Cable

IEEE 835 PG 1827 - 1908;Standard Power Cable Ampacity Tables - 15 kV Single Conductor Solid Type Paper Lead Sheathed Power Cable

IEEE 835 PG 1909 - 1990;Standard Power Cable Ampacity Tables - 35 kV Shielded Single Conductor Solid Type Paper Lead Sheathed Power Cable

IEEE 835 PG 1991 - 2036;Standard Power Cable Ampacity Tables - 5 kV Belted Three Conductor Solid Paper Lead Sheathed Power Cable

IEEE 835 PG 2037 - 2082;Standard Power Cable Ampacity Tables - 15 kV Shielded Three Conductor Solid Paper   Low Pressure Gas Filled Lead Sheathed Power Cable

IEEE 835 PG 205 - 336;Standard Power Cable Ampacity Tables - 15 kV Extruded Dielectric 2 c Concentric Neutral Cable

IEEE 835 PG 2083 - 2128;Standard Power Cable Ampacity Tables - 35 kV Shielded Three Conductor Solid Paper   Low Pressure Gas Filled Lead Sheathed Power Cable

IEEE 835 PG 2129 - 2222;Standard Power Cable Ampacity Tables - 69 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2223 - 2316;Standard Power Cable Ampacity Tables - 115 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2317 - 2363;Standard Power Cable Ampacity Tables - 138 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2364 - 2504;Standard Power Cable Ampacity Tables - 138 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2505 - 2527;Standard Power Cable Ampacity Tables - 230 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2528 - 2550;Standard Power Cable Ampacity Tables - 230 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2551 - 2573;Standard Power Cable Ampacity Tables - 230 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2574 - 2596;Standard Power Cable Ampacity Tables - 230 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2597 - 2619;Standard Power Cable Ampacity Tables - 345 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2620 - 2642;Standard Power Cable Ampacity Tables - 345 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2643 - 2665;Standard Power Cable Ampacity Tables - 345 kV 1 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2666 - 2688;Standard Power Cable Ampacity Tables - 345 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2689 - 2734;Standard Power Cable Ampacity Tables - 500 kV 1 c Self Contained Liquid Filled Aluminum Sheathed Power Cable

IEEE 835 PG 2735 - 2834;Standard Power Cable Ampacity Tables - 69 kV 3 c Self Contained Liquid Filled Lead Sheathed Power Cable

IEEE 835 PG 2835 - 2852;Standard Power Cable Ampacity Tables - 69 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2853 - 2870;Standard Power Cable Ampacity Tables - 115 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2871 - 2888;Standard Power Cable Ampacity Tables - 138 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2889 - 2906;Standard Power Cable Ampacity Tables - 230 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2907 - 2924;Standard Power Cable Ampacity Tables - 345 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2925 - 2942;Standard Power Cable Ampacity Tables - 500 kV Paper Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2943 - 2960;Standard Power Cable Ampacity Tables - 115 kV LPP Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2961 - 2978;Standard Power Cable Ampacity Tables - 138 kV LPP Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2979 - 2996;Standard Power Cable Ampacity Tables - 230 kV LPP Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 2997 - 3014;Standard Power Cable Ampacity Tables - 345 kV LPP Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 3015 - 3032;Standard Power Cable Ampacity Tables - 500 kV LPP Insulated High Pressure Liquid Filled Pipe Type Cable

IEEE 835 PG 3033 - 3050;Standard Power Cable Ampacity Tables - 69 kV Paper Insulated High Pressure Gas Filled Pipe Type Cable

IEEE 835 PG 3051 - 3068;Standard Power Cable Ampacity Tables - 115 kV Paper Insulated High Pressure Gas Filled Pipe Type Cable

IEEE 835 PG 3069 - 3086;Standard Power Cable Ampacity Tables - 138 kV Paper Insulated High Pressure Gas Filled Pipe Type Cable

IEEE 835 PG 337 - 680;Standard Power Cable Ampacity Tables - 5 to 15 kV Shielded Single Conductor Extruded Dielectric Power Cable

IEEE 835 PG 681 - 1024;Standard Power Cable Ampacity Tables - 25 to 46 kV Shielded Single Conductor Extruded Dielectric Power Cable

IEEE 835 PG 73 - 204;Standard Power Cable Ampacity Tables - 5 kV Extruded Dielectric 2 c Concentric Neutral Cable

IEEE 835;Standard Power Cable Ampacity Tables

IEEE 835A;Standard Power Cable Ampacity Tables Amendment 1: Revision to Introduction

IEEE 836;Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers

IEEE 837;IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding

IEEE 839;GUIDE: PROCEDURES FOR TESTING SINGLE-PHASE AND POLYPHASE INDUCTION MOTORS FOR USE IN HERMETIC COMPRESSORS

IEEE 841;Petroleum and Chemical Industry-Premium- Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp)

IEEE 844;Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels

IEEE 845;Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations

IEEE 848;Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables

IEEE 85;Test Procedure for Airborne Sound Measurements on Rotating Electric Machinery - Correction - 1973

IEEE 853;RECOMMENDED PRACTICE FOR VOLTAGE-ENDURANCE TESTING OF ENAMELED WIRE

IEEE 854;Radix-Independent Floating-Point Arithmetic - IEEE Computer Society

IEEE 855;Standard for Microprocessor Operating System Interfaces (MOSI)

IEEE 857;Recommended Practice for Test Procedures for High-Voltage Direct- Current Thyristor Valves

IEEE 858;Standard Definitions in Power Operations Terminology

IEEE 859;Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities

IEEE 86;RECOMMENDED PRACTICE: DEFINITIONS OF BASIC PER-UNIT QUANTITIES FOR AC ROTATING MACHINES

IEEE 8802-11 AMD 1;Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications AMENDMENT 1: Prioritization of management frames - IEEE Computer Society

IEEE 8802-11 AMD 2;Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications AMENDMENT 2: MAC enhancements for robust audio video streaming - IEEE Computer Society

IEEE 8802-11 AMD 3;Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications - IEEE Computer Society

IEEE 8802-11;Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications - IEEE Computer Society

IEEE 896.1;Information Technology - Microprocessor Systems - Futurebus+ - Logical Protocol Specification - IEEE Computer Society Document; ISO IEC 10857; Incorporates ANSI IEEE Std 896.1 - 1991 and IEEE Std 896.1a - 1993

IEEE 896.10;Standard for Futurebus+ Trademark Spaceborne Systems - Profile S - IEEE Computer Society Document

IEEE 896.2;Standard for Futurebus+ - Physical Layer and Profile Specification - IEEE Computer Society Document

IEEE 896.2A 1994 SUPP;Standard for Futurebus+ - Physical Layer and Profile Specification: Errata, Corrections, and Clarifications - IEEE Computer Society Document

IEEE 896.3;Recommended Practice for Futurebus+ - IEEE Computer Society Document

IEEE 896.4;Standard for Conformance Test Requirements for Futurebus+ - IEEE Computer Society Document

IEEE 896.4A SUPP;Standard for Conformance Test Requirements for Futurebus+ Trademark - Errata, Corrections, and Clarifications

IEEE 896.5;Information Technology - Microprocessor Systems - Futurebus+ Trademark, Profile M (Military)

IEEE 896.5A;STANDARD FOR FUTUREBUS+ TRADEMARK, PROFILE M (MILITARY): ERRATA, CORRECTIONS, AND CLARIFICATIONS (IEEE COMPUTER SOCIETY DOCUMENT)

IEEE 896.9;Standard for Fault Tolerant Extensions to The Futurebus+ Trademark Architecture - IEEE Computer Society Document

IEEE 90003;Guide Adoption of ISO IEC 90003:2004 Software Engineering-Guidelines for the Application of ISO 9001:2000 to Computer Software - IEEE Computer Society

IEEE 902;Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems - IEEE Yellow Book

IEEE 91A 91;IEEE Standard for Graphic Symbols for Logic Functions

IEEE 928;Recommended Criteria for Terrestrial Photovoltaic Power Systems

IEEE 929;Recommended Practice for Utility Interface of Photovoltaic (PV) Systems

IEEE 93;GUIDE FOR TRANSFORMER IMPULSE TESTS

IEEE 930;Guide for the Statistical Analysis of Electrical Insulation Breakdown Data

IEEE 933;Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities

IEEE 934;Standard Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating Stations

IEEE 935;Guide on Terminology for Tools and Equipment to Be Used in Live Line Working

IEEE 936;GUIDE FOR SELF-COMMUTATED CONVERTERS

IEEE 937;IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems

IEEE 94;Recommended Definitions of Terms for Automatic Generation Control on Electric Power Systems

IEEE 943;Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems

IEEE 944;Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Systems

IEEE 945;Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology

IEEE 946;Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations

IEEE 949;Trial-Use Standard for Media-Independent Information Transfer - IEEE Computer Society

IEEE 95;Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage

IEEE 951;Guide to the Assembly and Erection of Metal Transmission Structures

IEEE 952;Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic Gyros

IEEE 957;Guide for Cleaning Insulators

IEEE 958;Guide for the Application of AC Adjustable-Speed Drives on 2 400 13 800 V Auxiliary Systems in Electric Power Generating Stations

IEEE 959;Standard Specifications for an I O Expansion Bus: SBX Bus - IEEE Computer Society Document

IEEE 96;General Principles for Rating Electric Apparatus for Short-Time, Intermittent, or Varying Duty

IEEE 960;Standard FASTBUS Modular High-Speed Data Acquisition and Control System - Includes IEEE 1177: 1993

IEEE 961;Standard for an 8-Bit Microcomputer Bus System: STD Bus - IEEE Computer Society Document

IEEE 97;RECOMMENDED PRACTICE FOR SPECIFYING SERVICE CONDITIONS IN ELECTRICAL STANDARDS (A SUPPLEMENT TO IEEE STANDARDS PUBLICATION NO. 1 "GENERAL PRINCIPLES FOR TEMPERATURE LIMITS IN THE RATING OF ELECTRIC EQUIPMENT")

IEEE 973;Standard Definitions of Switching System Performance in a Telecommunications Environment

IEEE 977;Guide to Installation of Foundations for Transmission Line Structures

IEEE 978;Guide for in-Service Maintenance and Electrical Testing of Live-Line Tools

IEEE 979;Guide for Substation Fire Protection

IEEE 98;Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials

IEEE 980;Guide for Containment and Control of Oil Spills in Substations

IEEE 982.1;Standard Dictionary of Measures to Produce Reliable Software - IEEE Computer Society

IEEE 982.2;Guide for the Use of IEEE Standard Dictionary of Measures to Produce Reliable Software - IEEE Computer Society Document

IEEE 983;GUIDE FOR SOFTWARE QUALITY ASSURANCE PLANNING (IEEE COMPUTER SOCIETY DOC.)

IEEE 987;Guide for Application of Composite Insulators

IEEE 99;Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electric Equipment

IEEE 990;Recommended Practice for Ada as a Program Design Language - IEEE Computer Society Document

IEEE 991;Logic Circuit Diagrams

IEEE 993;Standard for Test Equipment Description Language (TEDL)

IEEE 9945;Information technology - Portable Operating System Interface (POSIX) Base Specifications, Issue 7 - IEEE Computer Society

IEEE 995;RECOMMENDED PRACTICE FOR EFFICIENCY DETERMINATION OF ALTERNATING-CURRENT ADJUSTABLE-SPEED DRIVES PART I - LOAD COMMUTATED INVERTER SYNCHRONOUS MOTOR DRIVES

IEEE 997;STANDARD SERIAL ASCII INSTRUMENTATION LOOP (SAIL) SHIPBOARD DATA COMMUNICATION (IEEE COMPUTER SOCIETY DOC.)

IEEE 998;Guide for Direct Lightning Stroke Shielding of Substations

IEEE 999;Recommended Practice for Master Remote Supervisory Control and Data Acquisition (SCADA) Communications

IEEE C12.1;Code for Electricity Metering 8th Edition - Revised and Redesignated to ANSI NEMA C12.1 - 1995

IEEE C12.11;Instrument Transformers for Revenue Metering, 10 kV BIL Through 350 kV (0.6 kV NSV Through 69 kV NSV)

IEEE C12.13;Electronic Time-of-Use Registers for Electricity Meters

IEEE C12.14;Standard for Magnetic Tape Pulse Recorders for Electricity Meters

IEEE C12.15;Electricity Metering Solid-State Demand Registers for Electromechanical Watthour Meters

IEEE C12.16;Electricity Metering Solid-State Electricity Meters

IEEE C12.17;Electricity Metering Cartridge-Type Solid- State Pulse Recorders for Electricity Metering

IEEE C12.4;Standard for Mechanical Demand Registers - Now Copyrighted by NEMA

IEEE C12.6;Standard for Marking and Arrangement of Terminals for Phase-Shifting Devices Used in Metering - Now Copyrighted by NEMA

IEEE C12.7;American National Standard Requirements for Watthour Meter Sockets

IEEE C12.8;American National Standard Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters

IEEE C12.9;American National Standard for Test Switches for Transformer-Rated Meters

IEEE C135.1;Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction

IEEE C135.2;Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction

IEEE C135.20;Zinc-Coated Ferrous Insulator Clevises for Overhead Line Construction

IEEE C135.22;Zinc-Coated Ferrous Pole-Top Insulator Pins with Lead Threads for Overhead Line Construction

IEEE C135.3;Zinc-Coated Ferrous Lag Screws for Overhead Line Contruction - Best Copy Available

IEEE C135.30;Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction

IEEE C135.31;Zinc-Coated Ferrous Single and Double Upset Spool Insulator Bolts for Overhead Line Construction

IEEE C135.33;Galvanized Ferrous Crossarm Gains for Overhead Line Construction

IEEE C135.35;Zinc-Coated Ferrous Cable Racks and Cable Rack Hooks for Underground Line Construction

IEEE C135.6;Zinc-Coated Ferrous Crossarm Braces for Overhead Line Construction

IEEE C135.61;Standard for the Testing of Overhead Transmission and Distribution Line Hardware

IEEE C135.62;Zinc-Coated Forged Anchor Shackles

IEEE C135.63;Standard for Shoulder Live Line Extension Links for Overhead Line Construction

IEEE C135.64;Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps

IEEE C135.80;Fasteners for Overhead Line Construction

IEEE C135.90;Pole Line Hardware for Overhead Line Construction

IEEE C136.1;Roadway Lighting - Filament Lamps - Guide for Selection

IEEE C136.10;Roadway Lighting Equipment - Locking-Type Photocontrol Devices and Mating Receptacle Physical and Electrical Interchangeability and Testing

IEEE C136.11;American National Standard for Roadway Lighting Equipment - Multiple Sockets

IEEE C136.12;American National Standard for Roadway Lighting Equipment - Mercury Lamps - Guide for Selection

IEEE C136.13;Roadway Lighting - Metal Brackets for Wood Poles

IEEE C136.15;Roadway Lighting Equipment - High-Intensity-Discharge and Low-Pressure Sodium Lamps in Luminaires - Field Identification - Now Copyrighted by Nema

IEEE C136.16;American National Standard for Roadway Lighting Equipment - Enclosed Post Top-Mounted Luminaires

IEEE C136.17;Roadway Lighting Equipment - Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps - Mechanical Interchangeability of Refractors - This is Now Copyrighted by NEMA

IEEE C136.18;American National Standard for High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps Used in Roadway Lighting Equipment

IEEE C136.19;American National Standard for Roadway Lighting Equipment - High-Pressure Sodium Lamps - Guide for Selection - Now Copyrighted by NEMA

IEEE C136.2;American National Standard for Roadway Lighting Equipment - Luminaires Voltage Classification

IEEE C136.20;Roadway Lighting Equipment - Fiber-Reinforced Plastic (FRP) Lighting Poles

IEEE C136.21;Roadway Lighting - Vertical Tenons Used with Post-Top-Mounted Luminaires - Now Copyrighted by NEMA

IEEE C136.22;Roadway Lighting Equipment - Internal Labeling of Luminaires

IEEE C136.23;American National Standard for Roadway Lighting Equipment - Enclosed Architectural Luminaires

IEEE C136.27;Roadway Lighting Equipment - Tunnel Lighting Luminaires

IEEE C136.3;American National Standard for Roadway Lighting Equipment - Luminaire Attachments

IEEE C136.31;American National Standard for Roadway Lighting Equipment - Luminaire Vibration - This is Now Copyrighted by NEMA

IEEE C136.32;American National Standard for Roadway Lighting Equipment - Enclosed Setback Luminaires and Directional Floodlights for High-Intensity-Discharge Lamps

IEEE C136.4;American National Standard for Roadway Lighting Equipment - Series Sockets and Series-Sockets Receptacles

IEEE C136.5;American National Standard for Roadway Lighting Equipment - Film Cutouts

IEEE C136.6;American National Standard for Roadway Lighting Equipment - Metal Heads and Reflector Assemblies - Mechanical and Optical Interchangeability

IEEE C136.9;Roadway Lighting Equipment - Socket Support Assemblies for Metal Heads - Mechanical Interchangeability

IEEE C136;IEEE Standards Collection Roadway Lighting Equipment - Includes ANSI C136.1 Through C136.22

IEEE C1387.3;Portable Operating System Interface (POSIX Trademark) System Administration Part 3: User and Group Account Administration - IEEE Computer Society Document

IEEE C16.60;See IEEE Std 376

IEEE C2 1987-1990;NATIONAL ELECTRICAL SAFETY CODE INTERPRETATIONS 1987-1990 INCLUSIVE

IEEE C2 ERTA;National Electrical Safety Code

IEEE C2 INT 1ST COLLECTION;FIRST INTERIM COLLECTION OF THE NATIONAL ELECTRICAL SAFETY CODE INTERPRETATIONS 1991-1993 INCLUSIVE

IEEE C2 INT 2ND COLLECTION;SECOND INTERIM COLLECTION OF THE NATIONAL ELECTRICAL SAFETY CODE INTERPRETATIONS 1991-1993 INCLUSIVE

IEEE C2;National Electrical Safety Code

IEEE C37 SERIES SET CD;POWER SWITCHGEAR, SUBSTATIONS, AND RELAYS STANDARDS COLLECTIONS (VUSPEC) - STDVU199

IEEE C37.010;Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.010B;Standard for Emergency Load Current-Carrying Capability - Supplement to ANSI  IEEE C37.010-1979, IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.010D SUPP;Supplement to IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.010E SUPP;Supplement to IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.011;Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers

IEEE C37.012;Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V

IEEE C37.013;AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.013A;AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Supplement for Use with Generators Rated 10–100 MVA

IEEE C37.015;Guide for the Application of Shunt Reactor Switching

IEEE C37.016;Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV

IEEE C37.017;Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear

IEEE C37.04 CORR 1;Rating Structure for AC High-Voltage Circuit Breakers Corrigendum 1

IEEE C37.04 ERTA;Errata to IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.04 INT 1;Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.04;Rating Structure for AC High-Voltage Circuit Breakers

IEEE C37.04A;IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching

IEEE C37.04B;Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

IEEE C37.06.1;Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated “Definite Purpose for Fast Transient Recovery Voltage Rise Times”

IEEE C37.06;AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V

IEEE C37.081;Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.081A;Supplement to IEEE Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis 8.3.2: Recovery Voltage for Terminal Faults; Asymmetrical Short-Circuit Current

IEEE C37.082;Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers

IEEE C37.083;Guide for Synthetic Capacitive Current Switching Tests of AC High-Voltage Circuit Breakers

IEEE C37.09 CORR 1;Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09 ERTA;Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09;Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09A;Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

IEEE C37.09B;Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 2: To Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100

IEEE C37.1;Standard for SCADA and Automation Systems

IEEE C37.10.1;Guide for the Selection of Monitoring for Circuit Breakers

IEEE C37.10;Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures

IEEE C37.100.1;Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V

IEEE C37.100;Standard Definitions for Power Switchgear

IEEE C37.101;Guide for Generator Ground Protection

IEEE C37.102;Guide for AC Generator Protection

IEEE C37.103;Guide for Differential and Polarizing Relay Circuit Testing

IEEE C37.104 ERTA;Errata to IEEE Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines

IEEE C37.104;Guide for Automatic Reclosing of Circuit Breakers for AC Distribution and Transmission Lines

IEEE C37.105;Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

IEEE C37.106;Guide for Abnormal Frequency Protection for Power Generating Plants

IEEE C37.108;Guide for the Protection of Network Transformers

IEEE C37.109;IEEE Guide for the Protection of Shunt Reactors

IEEE C37.11;Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Revision of ANSI C37.11-1979

IEEE C37.110 CORR 1;Guide for the Application of Current Transformers Used for Protective Relaying Purposes Corrigendum 1: Corrections to Equation 18 and Equation 19

IEEE C37.110;Guide for the Application of Current Transformers Used for Protective Relaying Purposes

IEEE C37.111;Measuring relays and protection equipment – Part 24: Common format for transient data exchange (COMTRADE) for power systems

IEEE C37.112;Inverse-Time Characteristic Equations for Overcurrent Relays

IEEE C37.113;Guide for Protective Relay Applications to Transmission Lines

IEEE C37.114;Guide for Determining Fault Location on AC Transmission and Distribution Lines

IEEE C37.115;Standard Test Method for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control, and Data Acquisition System

IEEE C37.116;Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks

IEEE C37.117;Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration

IEEE C37.118.1;Synchrophasor Measurements for Power Systems

IEEE C37.118.1A;Synchrophasor Measurements for Power Systems Amendment 1: Modification of Selected Performance Requirements

IEEE C37.118.2;Synchrophasor Data Transfer for Power Systems

IEEE C37.118;Standard for Synchrophasors for Power Systems

IEEE C37.119;Guide for Breaker Failure Protection of Power Circuit Breakers

IEEE C37.12.1;Guide for High-Voltage (>1000 V) Circuit Breaker Instruction Manual Content

IEEE C37.12;Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts)

IEEE C37.121;Guide for Switchgear-Unit Substation-Requirements

IEEE C37.122 ERTA;Errata to High Voltage Gas-Insulated Substations Rated Above 52 kV - Correction Sheet

IEEE C37.122.2;Guide for the Application of Gas-Insulated Substations 1 kV to 52 kV

IEEE C37.122.3;Guide for Sulphur Hexaflouride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment

IEEE C37.122.5;Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment

IEEE C37.122.6;Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV

IEEE C37.122;High Voltage Gas-Insulated Substations Rated Above 52 kV

IEEE C37.123;Guide to Specifications for Gas- Insulated, Electric Power Substation Equipment

IEEE C37.13 INT 1;Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures

IEEE C37.13.1;Standard for Definite-Purpose Switching Devices for Use in Metal- Enclosed Low-Voltage Power Circuit Breaker Switchgear

IEEE C37.13.1A;Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Revise Short-Circuit Rating and Test Requirement

IEEE C37.13;Low-Voltage AC Power Circuit Breakers Used in Enclosures

IEEE C37.13A;Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to 1000 V AC and Below

IEEE C37.14;Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures

IEEE C37.16;Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below) and DC (3200 V and below) Power Circuit Breakers

IEEE C37.17;Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers

IEEE C37.18;Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery

IEEE C37.2;Electrical Power System Device Function Numbers, Acronyms, and Contact Designations

IEEE C37.20.1 INT 1;Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

IEEE C37.20.1;Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

IEEE C37.20.1A;Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short- Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections

IEEE C37.20.1B;Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear

IEEE C37.20.2 CORR;Metal-Clad Switchgear - Correction Sheet

IEEE C37.20.2;Metal-Clad Switchgear

IEEE C37.20.3;Metal-Enclosed Interrupter Switchgear (1 kV–38 kV)

IEEE C37.20.4;Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear

IEEE C37.20.6;4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures

IEEE C37.20.7 CORR 1;Guide for Testing Metal-Enclosed Switchgear Rated up to 38 kV for Internal Arcing Faults Corrigendum 1

IEEE C37.20.7 ERTA;Errata to IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults

IEEE C37.20.7 INT 1;Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults

IEEE C37.20.7;Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults

IEEE C37.21;Standard for Control Switchboards

IEEE C37.22;Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear - Replaces NEMA C37.22-1997

IEEE C37.23;Metal-Enclosed Bus

IEEE C37.230;Guide for Protective Relay Applications to Distribution Lines

IEEE C37.231;Recommended Practice for Microprocessor-Based Protection Equipment Firmware Control

IEEE C37.232;Common Format for Naming Time Sequence Data Files (COMNAME)

IEEE C37.233;Guide for Power System Protection Testing

IEEE C37.234;Guide for Protective Relay Applications to Power System Buses

IEEE C37.235;Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes

IEEE C37.236;Guide for Power System Protective Relay Applications Over Digital Communication Channels

IEEE C37.238;Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications

IEEE C37.239;Common Format for Event Data Exchange (COMFEDE) for Power Systems

IEEE C37.24;Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear

IEEE C37.242;Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control

IEEE C37.244;Guide for Phasor Data Concentrator Requirements for Power System Protection, Control, and Monitoring

IEEE C37.26;Guide for Methods of Power Factor Measurement for Low-Voltage Inductive Test Circuits

IEEE C37.27;Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses

IEEE C37.29;Low-Voltage AC Power Circuit Protectors Used in Enclosures

IEEE C37.30 INT 1;Requirements for High-Voltage Switches

IEEE C37.30.1;Requirements for AC High-Voltage Air Switches Rated Above 1000 V

IEEE C37.30;Standard Requirements for High-Voltage Switches

IEEE C37.301;High-Voltage Switchgear (Above 1000 V) Test Techniques-Partial Discharge Measurements

IEEE C37.32;High-Voltage Switches, Bus Supports and Accessories Schedule of Preferred Ratings, Construction Guidelines and Specifications

IEEE C37.34;Standard Test Code for High-Voltage Air Switches

IEEE C37.35;Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Load Interrupter Switches

IEEE C37.36B;Guide to Current Interruption with Horn-Gap Air Switches

IEEE C37.37;Loading Guide for AC High-Voltage Air Switches (In Excess of 1000 V)

IEEE C37.37A;Loading Guide for AC High-Voltage Air Switches under Emergency Conditions

IEEE C37.38;Gas-Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches

IEEE C37.40 ERTA;Errata to IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

IEEE C37.40;Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

IEEE C37.41 ERTA;Errata to IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices

IEEE C37.41;Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices

IEEE C37.42;Specifications for High-Voltage (Greater Than 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices

IEEE C37.43;Specifications for High- Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors

IEEE C37.45;Standard Specifications for High- Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 kV through 8.3 kV

IEEE C37.46;Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches

IEEE C37.47;Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches

IEEE C37.48.1;Guide for the Application, Operation, and Coordination of High - Voltage (>1000 V) Current-Limiting Fuses

IEEE C37.48;Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories

IEEE C37.5;GUIDE FOR CALCULATION OF FAULT CURRENTS FOR APPLICATION OF AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS

IEEE C37.53.1;American National Standard High-Voltage Current-Limiting Motor-Starter Fuses Conference Test Procedures - Replaces NEMA C37.53.1-1989

IEEE C37.59 ERTA;Errata to Requirements for Conversion of Power Switchgear Equipment

IEEE C37.59;Requirements for Conversion of Power Switchgear Equipment

IEEE C37.60;High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV

IEEE C37.63;Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV

IEEE C37.66;Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) IEEE 3 Park Avenue New York, NY 10016-5997, USA 22 March 2006 IEEE Power Engineering Society Sponsored by the Switchgear Committee

IEEE C37.71;Standard for Three-Phase, Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems

IEEE C37.73;Standard Requirements for Pad-Mounted Fused Switchgear

IEEE C37.74 INT 1;Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV

IEEE C37.74;Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV - :2001

IEEE C37.81;Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies

IEEE C37.82;The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations

IEEE C37.85;SAFETY REQUIREMENTS FOR X-RADIATION LIMITS FOR AC HIGH-VOLTAGE POWER VACUUM INTERRUPTERS USED IN POWER SWITCHGEAR

IEEE C37.85A SUPP;SUPPLEMENT TO SAFETY REQUIREMENTS FOR X-RADIATION LIMITS FOR AC HIGH-VOLTAGE POWER VACUUM INTERRUPTERS USED IN POWER SWITCHGEAR

IEEE C37.90.1;Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C37.90.2 TRIAL-USE;TRIAL-USE STANDARD WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS

IEEE C37.90.2;Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers

IEEE C37.90.3;Standard Electrostatic Discharge Tests for Protective Relays

IEEE C37.90;Standard for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE C37.91;Guide for Protective Relay Applications to Power Transformers - Best Copy Available

IEEE C37.92;Analog Inputs to Protective Relays from Electronic Voltage and Current Transducers

IEEE C37.93;Guide for Power System Protective Relay Applications of Audio Tones Over Voice Grade Channels

IEEE C37.94;N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment

IEEE C37.95;Guide for Protective Relaying of Utility-Consumer Interconnections

IEEE C37.96;IEEE Guide for AC Motor Protection

IEEE C37.97;Guide for Protective Relay Applications to Power System Buses

IEEE C37.98;Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities

IEEE C37.99;Guide for the Protection of Shunt Capacitor Banks

IEEE C50.10;General Requirements for Synchronous Machines

IEEE C50.12;Salient-Pole 50 Hz and 60 Hz Synchronous Generators and Generator Motors for Hydraulic Turbine Applications Rated 5 MVA and Above

IEEE C50.13;Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

IEEE C50.14;Requirements for Combustion Gas Turbine Driven Cylindrical Rotor Synchronous Generators

IEEE C57.100;Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers

IEEE C57.104;Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers

IEEE C57.105;Guide for Application of Transformer Connections in Three-Phase Distribution Systems

IEEE C57.106;Guide for Acceptance and Maintenance of Insulating Oil in Equipment

IEEE C57.109;Guide for Liquid-Immersed Transformer Through-Fault-Current Duration

IEEE C57.110;Recommended Practice for Establishing Liquid-Filled and Dry- Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents

IEEE C57.111;Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers

IEEE C57.113;Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors

IEEE C57.114;Seismic Guide for Power Transformers and Reactors

IEEE C57.115;Guide for Loading Mineral-Oil-Immersed Power Transformers Rated in Excess of 100 MVA (65 Degrees C Winding Rise)

IEEE C57.116;Guide for Transformers Directly Connected to Generators

IEEE C57.117;Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems

IEEE C57.119;Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings

IEEE C57.12.00;General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.01;Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and or Resin Encapsulated Windings

IEEE C57.12.10 CORR 1;Standard Requirements for Liquid-Immersed Power Transformers Corrigendum 1: Correction of 5.1.9 Sudden Pressure Relay

IEEE C57.12.10 CORR 2;Liquid-Immersed Power Transformers Corrigendum 2: Correction of A.3.2.13 Autotransformer LTC application considerations

IEEE C57.12.10 ERTA;Errata to IEEE Standard Requirements for Liquid-Immersed Power Transformers

IEEE C57.12.10;Requirements for Liquid-Immersed Power Transformers

IEEE C57.12.11;Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating)

IEEE C57.12.12;Guide for Installation of Oil-Immersed EHV Transformers 345 kV and Above - Supplement to ANSI IEEE C57.12.11-1980

IEEE C57.12.20;Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970 13 800Y V and Below

IEEE C57.12.21;Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD 19920 Volts and Below; Low-Voltage, 240 120 Volts; 167 kVA and Smaller - Replaces NEMA C57.12.21-1980

IEEE C57.12.22;Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y 19 920 Volts and Below; Low Voltage, 480 Volts and Below - Replaces NEMA C57.12.22-1993

IEEE C57.12.23;Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below

IEEE C57.12.24;Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY 19 920 Volts and Below; Low Voltage, 600 Volts and Below

IEEE C57.12.25;Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY 19 920 Volts and Below; Low Voltage, 240 120 Volts; 167 kVA and Smaller Requirements - Replaces NEMA C57.12.25-1990

IEEE C57.12.26;Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use with Separable Insulated High-Voltage Connectors (34 500 Grd Y 19 920 V and Below; 2500 kVA and Smaller) - Replaces NEMA C57.12.26-1993

IEEE C57.12.28 INT 3;Pad-Mounted Equipment Enclosure Integrity

IEEE C57.12.28;Pad-Mounted EquipmentEnclosure Integrity

IEEE C57.12.29;IEEE Standard for Pad-Mounted Equipment-Enclosure Integrity for Coastal Environments

IEEE C57.12.30;Pole-Mounted Equipment-Enclosure Integrity for Coastal Environments

IEEE C57.12.31 CORR 1;Pole-Mounted Equipment-Enclosure Integrity Corrigendum 1: Correction to the SCAB Corrosion Test in 4.5.6

IEEE C57.12.31;Pole-Mounted Equipment-Enclosure Integrity

IEEE C57.12.32;Standard for Submersible Equipment-Enclosure Integrity

IEEE C57.12.34;Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below

IEEE C57.12.35;Bar Coding for Distribution Transformers and Step-Voltage Regulators

IEEE C57.12.36;Standard Requirements for Liquid-Immersed Distribution Substation Transformers

IEEE C57.12.37;IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data

IEEE C57.12.38;Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers; High Voltage, 34 500 GrdY 19 920 V and Below, Low Voltage, 240 120 V; 167 kVA and Smaller

IEEE C57.12.40;Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 GrdY  19 920 and Below; Low Voltage, 600 V and Below; Subway and Vault Types (Liquid Immersed)

IEEE C57.12.44 INT 1;Standard Requirements for Secondary Network Protectors

IEEE C57.12.44;Standard Requirements for Secondary Network Protectors

IEEE C57.12.50;Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts - Replaces NEMA C57.12.50-1981

IEEE C57.12.51;Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 V to 34 500 V; Low-Voltage 208Y 120 V to 4160 V-General Requirements

IEEE C57.12.52;Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y 120 to 4160 Volts - General Requirements

IEEE C57.12.55;Transformers Used in Unit Installations, Including Unit SubstationsConformance Standard - Replaces NEMA C57.12.55-1987

IEEE C57.12.56;Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers

IEEE C57.12.57;Transformers Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Voltage 34 500 Volts and Below,Low-Voltage 216Y 125 and 480Y 277 Volts - Requirements

IEEE C57.12.58;Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil

IEEE C57.12.59 ERTA;Guide for Dry-Type Transformer Through-Fault Current Duration

IEEE C57.12.59;Guide for Dry-Type Transformer Through-Fault Current Duration

IEEE C57.12.60 CORR 1;Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers Corrigendum 1

IEEE C57.12.60;Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers

IEEE C57.12.70;Standard Terminal Markings and Connections for Distribution and Power Transformers

IEEE C57.12.80;Terminology for Power and Distribution Transformers

IEEE C57.12.90;Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.91;Test Code for Dry-Type Distribution and Power Transformers

IEEE C57.120;Loss Evaluation Guide for Power Transformers and Reactors

IEEE C57.121;Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Fluid in Transformers

IEEE C57.123;Guide for Transformer Loss Measurement

IEEE C57.124;Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers

IEEE C57.125;Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors

IEEE C57.127;Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors

IEEE C57.129;General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers

IEEE C57.13.1;Guide for Field Testing of Relaying Current Transformers

IEEE C57.13.2;Standard Conformance Test Procedures for Instrument Transformers

IEEE C57.13.3;Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases

IEEE C57.13.5;Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above

IEEE C57.13.6;Standard for High-Accuracy Instrument Transformers

IEEE C57.13;Requirements for Instrument Transformers

IEEE C57.131;Requirements for Tap Changers

IEEE C57.134;Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers

IEEE C57.135;Guide for the Application, Specification, and Testing of Phase-Shifting Transformers

IEEE C57.136;Guide for Sound Level Abatement and Determination for Liquid-Immersed Power Transformers and Shunt Reactors Rated over 500 kVA

IEEE C57.138;Recommended Practice for Routine Impulse Test for Distribution Transformers

IEEE C57.139;Guide for Dissolved Gas Analysis in Transformer Load Tap Changers

IEEE C57.140;Guide for the Evaluation and Reconditioning of Liquid Immersed Power Transformers

IEEE C57.142;Guide to Describe the Occurrence and Mitigation of Switching Transients Induced by Transformers, Switching Device, and System Interaction

IEEE C57.143;Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components

IEEE C57.144;Guide for Metric Conversion of Transformer Standards

IEEE C57.146;Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers

IEEE C57.147;Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers

IEEE C57.148;Control Cabinets for Power Transformers

IEEE C57.149;Guide for the Application and Interpretation of Frequency Response Analysis for Oil-Immersed Transformers

IEEE C57.15;Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators

IEEE C57.150;Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher

IEEE C57.152;Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors

IEEE C57.154;The Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures

IEEE C57.16;Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors

IEEE C57.17;Requirements for Arc Furnace Transformers

IEEE C57.18.10 ERTA;Standard Practices and Requirements for Semiconductor Power Rectifier Transformers

IEEE C57.18.10;Standard Practices and Requirements for Semiconductor Power Rectifier Transformers - Replaces ANSI IEEE C57.18

IEEE C57.18.10A;Practices and Requirements for Semiconductor Power Rectifier Transformers Amendment 1: Added Technical and Editorial Corrections

IEEE C57.19.00 ERTA;Errata to General Requirements and Test Procedure for Power Apparatus Bushings

IEEE C57.19.00 INT 1;General Requirements and Test Procedure for Power Apparatus Bushings

IEEE C57.19.00;General Requirements and Test Procedure for Outdoor Power Apparatus Bushings

IEEE C57.19.01 INT 1;Performance Characteristics and Dimensions for Outdoor Apparatus Bushings

IEEE C57.19.01;Performance Characteristics and Dimensions for Outdoor Apparatus Bushings

IEEE C57.19.03 CORR 1;Standard Requirements, Terminology, and Test Code for Bushings for DC Applications

IEEE C57.19.03;Standard Requirements, Terminology, and Test Code for Bushings for DC Applications

IEEE C57.19.100;Guide for Application of Power Apparatus Bushings

IEEE C57.19.101;Guide for Loading Power Apparatus Bushings

IEEE C57.21;Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA

IEEE C57.91;Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators

IEEE C57.92;Guide for Loading Mineral-Oil-Immersed Power Transformers up to and Including 100 MVA with 55 Degrees C or 65 Degrees C Average Winding Rise

IEEE C57.93;Guide for Installation and Maintenance of Liquid-Immersed Power Transformers

IEEE C57.94;IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers

IEEE C57.95;Guide for Loading Liquid-Immersed Step-Voltage and Induction-Voltage Regulators

IEEE C57.96;Guide for Loading Dry-Type Distribution and Power Transformers

IEEE C57.98;Guide for Transformer Impulse Tests

IEEE C62.1;Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits

IEEE C62.11;Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)

IEEE C62.2;Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems

IEEE C62.21 CORR 1;Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater Corrigendum 1: Correct Table 2, A.1, and A.2

IEEE C62.21;Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater

IEEE C62.22.1;Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems - IEEE 1299

IEEE C62.22;Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems

IEEE C62.23;Application Guide for Surge Protection of Electric Generating Plants

IEEE C62.31;Test Methods for Low- Voltage Gas-Tube Surge-Protective Device Components

IEEE C62.32;Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types)

IEEE C62.33;Standard Test Specifications for Varistor Surge-Protective Devices

IEEE C62.34;Standard for Performance of Low-Voltage Surge-Protective Devices (Secondary Arresters)

IEEE C62.35;Standard Test Methods for Avalanche Junction Semiconductor Surge-Protective Device Components

IEEE C62.36;Standard Test Methods for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits

IEEE C62.37.1;Guide for the Application of Thyristor Surge Protective Device Components

IEEE C62.37;Standard Test Specification for Thyristor Diode Surge Protective Devices

IEEE C62.38;Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evaluation Methods (for Electronic Equipment Subassemblies)

IEEE C62.39;Test Methods and Preferred Values for Self-Restoring Current-Limiter Components Used in Telecommunication Surge Protection

IEEE C62.41.1;Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power Circuits

IEEE C62.41.2 CORR 1;Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits Corrigendum 1: Deletion of Table A.2 and Associated Text

IEEE C62.41.2;Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits

IEEE C62.41;IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits

IEEE C62.42;Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage (Equal to or Less than 1000 V (ac) or 1200 V (dc)) Circuits

IEEE C62.43;Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less than 1000 V, rms, or 1200 V, DC) Data, Communications, and Signaling Circuits

IEEE C62.45;Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits

IEEE C62.47;Guide on Electrostatic Discharge (ESD): Characterization of the ESD Environment

IEEE C62.48;Guide on Interactions Between Power System Disturbances and Surge-Protective Devices

IEEE C62.50;Performance Criteria and Test Methods for Plug-in (Portable) Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120 V 240 V Single Phase Power Service and Metallic Conductive Communication Line(s)

IEEE C62.62;Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits

IEEE C62.64;Standard Specifications for Surge Protectors Used in Low- Voltage Data, Communications, and Signaling Circuits

IEEE C62.72;Guide for the Application of Surge-Protective Devices for Low-Voltage (1000 V or Less) AC Power Circuits

IEEE C62.82.1;Insulation Coordination-Definitions, Principles, and Rules

IEEE C62.92.1;Guide for the Application of Neutral Grounding in Electrical Utility Systems - Part I: Introduction

IEEE C62.92.2;Guide for the Application of Neutral Grounding in Electrical Utility Systems Part IIGrounding of Synchronous Generator Systems

IEEE C62.92.3;Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III-Generator Auxiliary Systems

IEEE C62.92.4;Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV - Distribution

IEEE C62.92.5;Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems

IEEE C62.92;Guide for the Application of Neutral Grounding in Electrical Utility Systems Part II-Grounding of Synchronous Generator Systems

IEEE C63.011;American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency Equipment

IEEE C63.022;American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

IEEE C63.10;American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices

IEEE C63.12;Recommended Practice for Electromagnetic Compatibility Limits

IEEE C63.13;Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use

IEEE C63.14;American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)

IEEE C63.15;American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment

IEEE C63.16;American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment

IEEE C63.17;American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices

IEEE C63.18;Recommended Practice for an on-Site, Ad Hoc Test Method for Estimating Radiated Electromagnetic Immunity of Medical Devices to Specific Radio-Frequency Transmitters

IEEE C63.19;American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids

IEEE C63.2;Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications

IEEE C63.22;American National Standard Guide for Automated Electromagnetic Interference Measurements

IEEE C63.23;American National Standard Guide for Electromagnetic Compatibility-Computations and Treatment of Measurement Uncertainty

IEEE C63.4;American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

IEEE C63.5;American National Standard for Electromagnetic Compatibility - Radiated Emission Measurements in Electromagnetic Interference (EMI) Control - Calibration of Antennas (9 kHz to 40 GHz)

IEEE C63.6;American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements

IEEE C63.7;American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements

IEEE C63.9;American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts

IEEE C92.2;Power Systems - Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal - Preferred Voltage Ratings

IEEE C93.1;Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)

IEEE C93.3;Requirements for Power-Line Carrier Carrier Traps

IEEE C93.4;Power-Line Carrier Line-Tuning Equipment (30 kHz to 500 kHz) Associated with Power Transmission Lines

IEEE C95.1 INT 1;Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz

IEEE C95.1;Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz

IEEE C95.1-2345;Military Workplaces-Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz

IEEE C95.1A;Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz Amendment 1: Specifies Ceiling Limits for Induced and Contact Current, Clarifies Distinctions between Localized Exposure and Spatial Peak Power Density

IEEE C95.2;Radio-Frequency Energy and Current-Flow Symbols

IEEE C95.3.1;Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 100 kHz

IEEE C95.3;Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz–300 GHz

IEEE C95.4;Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations

IEEE C95.5;RECOMMENDED PRACTICE FOR THE MEASUREMENT OF HAZARDOUS ELECTROMAGNETIC FIELDS - RF AND MICROWAVE

IEEE C95.6;Standard for Safety Levels with Respect to Human Exposure to Electromagnetic Fields, 0–3 kHz

IEEE C95.7;Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz

IEEE COLOR BOOKS SET CD;COMPLETE STANDARDS SERIES: VUSPEC - SE118A, 13 Books

IEEE COLOR BOOKS SET;COMPLETE SET OF IEEE COLOR BOOKS - SH95566

IEEE COMP;IEEE Standard Computer Dictionary Compilation of IEEE Standard Computer Glossaries - IEEE Computer Society Document

IEEE ETHERNET IN THE FIRST ML;Access for Everyone - SP1144

IEEE INDEX 1970-1980;IEEE 1970-1980 INDEX

IEEE INDEX 1976-1985;IEEE 1976-1985 INDEX

IEEE J-STD-016;Standard for Information Technology Software Life Cycle Processes Software Development Acquirer- Supplier Agreement - Issued for Trial Use

IEEE LOW-RATE WIRELESS NETWORK;Enabling Wireless Sensors with IEEE 802.15.4 - STDSP1150

IEEE N13.4;Standard for the Specification of Portable X- or Gamma-Radiation Survey Instruments

IEEE N317;Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring

IEEE N320;Performance Specifications for Reactor Emergency Radiological Monitoring Instrumentation

IEEE N322;American National Standard Inspection, Test, Construction, and Performance Requirements for Direct Reading Electrostatic Electroscope Type Dosimeters

IEEE N323;Radiation Protection Instrumentation Test and Calibration

IEEE N323A ERTA;Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

IEEE N323A;Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

IEEE N323AB;Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

IEEE N323B;Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation

IEEE N323C;Radiation Protection Instrumentation Test and Calibration-Air Monitoring Instruments

IEEE N323D;Installed Radiation Protection Instrumentation

IEEE N4.1;Guide for Classifying ELECTRICAL INSULATING MATERIALS EXPOSED TO NEUTRON AND GAMMA RADIATION - Best Copy Available

IEEE N42.12;American National Standard Calibration and Usage of Thallium Activated Sodium Iodide Detector Systems for Assay of Radionuclides

IEEE N42.13;Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides

IEEE N42.14;Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

IEEE N42.15;American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems

IEEE N42.16;Specifications for Sealed Radioactive Check Sources Used in Liquid-Scintillation Counters

IEEE N42.17A;Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions

IEEE N42.17B;American National Standard Performance Specifications for Health Physics Instrumentation-Occupational Airborne Radioactivity Monitoring Instrumentation

IEEE N42.17C;American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Extreme Environmental Conditions

IEEE N42.18;Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents

IEEE N42.20;American National Standard Performance Criteria for Active Personnel Radiation Monitors

IEEE N42.22;American National Standard - Traceability of Radioactive Sources to the National Institute of Standards and Technology (NIST) and Associated Instrument Quality Control

IEEE N42.23;American National Standard Measurement and Associated Instrument Quality Assurance for Radioassay Laboratories

IEEE N42.25;American National Standard Calibration and Usage of Alpha Beta Proportional Counters

IEEE N42.26;Radiation Protection Instrumentation - Monitoring Equipment - Personal Warning Devices for X and Gamma Radiations

IEEE N42.27;American National Standard for Determination of Uniformity of Solid Gamma-Emitting Flood Sources

IEEE N42.28;American National Standard for Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements

IEEE N42.30;American National Standard for Performance Specification for Tritium Monitors

IEEE N42.31;Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation

IEEE N42.32;American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security

IEEE N42.33;Portable Radiation Detection Instrumentation for Homeland Security

IEEE N42.34;Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides

IEEE N42.35;American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security

IEEE N42.37;American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention

IEEE N42.38;American National Standard Performance Criteria for Spectroscopy- Based Portal Monitors Used for Homeland Security

IEEE N42.4;Standard for High Voltage Connectors for Nuclear Instruments

IEEE N42.41;Minimum Performance Criteria for Active Interrogation Systems Used for Homeland Security

IEEE N42.42;Data Format for Radiation Detectors Used for Homeland Security

IEEE N42.43;Performance Criteria for Mobile and Transportable Radiation Monitors Used for Homeland Security

IEEE N42.44;American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems

IEEE N42.45;American National Standard for Evaluating the Image Quality of X-ray Computed Tomography (CT) Security-Screening Systems

IEEE N42.46;American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening

IEEE N42.47;American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans

IEEE N42.48;Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security

IEEE N42.49A;Performance Criteria for Alarming Electronic Personal Emergency Radiation Detectors (PERDs) for Exposure Control

IEEE N42.5;Bases for GM Counter Tubes

IEEE N42.53;Performance Criteria for Backpack-Based Radiation-Detection Systems Used for Homeland Security

IEEE N42.55;Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification

IEEE N42.6;Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter Chargers

IEEE N42.9;See IEEE Std 398

IEEE N449.1;Procedures for Periodic Inspection of Cobalt - 60 and Cesium - 137 Teletherapy Equipment

IEEE N45.2.4;Installation, Inspection, and Testing Requirements for Instrumentation, and Electric Equipment During the Construction of Nuclear Power Generating Stations

IEEE NESC & NESC HDBK CD;NESC AND NESC HANDBOOK AND SET (INCLUDES THE CODE AND THE HANDBOOK AND CD ROM) - Sh95516; VuSpec (TM) set Print + CD; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE NESC AND NESC HDBK;NESC AND NESC HANDBOOK AND SET (INCLUDES THE CODE AND THE HANDBOOK) - SH95515; SEE ALSO IEEE C2 & NESC HANDBOOK; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE NESC CD;NATIONAL ELECTRICAL SAFETY CODE ON CD ROM - SE163; VuSpec (TM; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE NESC HDBK;National Electrical Safety Code - BOK0171; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE NESC PROPOSALS;Preprint Proposals for the 2012 Edition of the National Electrical Safety Code

IEEE NESC;National Electrical Safety Code(R)

IEEE NESC1;Third Interim Collection of the National Electrical Safety Code Interpretations 1991-1993

IEEE NESC2;Fourth Interim Collection of the National Electrical Safety Code Interpretations 1991-1993

IEEE NESC3;Fifth Interim Collection of the National Electrical Safety Code Interpretations 1993-1995

IEEE NESCIR566;National Electrical Safety Code

IEEE NESCIR568;National Electrical Safety Code

IEEE NESCIR569;National Electrical Safety Code

IEEE NESCIR570;National Electrical Safety Code

IEEE NESCIR572;National Electrical Safety Code

IEEE NESCIR573;National Electrical Safety Code

IEEE NESCIR574;National Electrical Safety Code

IEEE P802.9B;Draft Standards for Local and Metropolitan Area Netwroks: Supplement to Integrated Services (IS) LAN Interface at the Medium Acess Control (MAC) and Physical (PHY) Layers AU to AU Interworking for 802.9 Integrated Services LAN - IEEE Computer Society Document

IEEE S-135-1;POWER CABLE AMPACITIES VOLUME I - COPPER CONDUCTORS INSULATIONS: IMPREGNATED PAPER VARNISHED CLOTH RUBBER AND THERMOPLASTIC ASBESTOS-VARNISHED CLOTH INSULATIONS: IN UNDERGROUND DUCTS BURIED DIRECTLY IN EARTH IN FREE AIR IN CONDUIT (IPCEA PUB.NO. P-46-426)

IEEE S-135-2;Power Cable Ampacities Volume II - Aluminum Conductors

IEEE SI 10 ERTA;Errata to American National Standard for Metric Practice

IEEE SI 10;American National Standard for Metric Practice

IEEE SMART GRID RESEARCH;GRID VISION 2050 - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE SOFTWARE ENG CD;Software Engineering Collection on CD-ROM - STDVU200; CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IEEE STDS;IEEE Standards Manual

IEEE VUSPEC VOL 1 CD;Safety & Security Standards Series, Volume I: Critical Infrastructure(STDVU121)

IEEE VUSPEC VOL II CD;Safety & Security Standards Series - Volume II: Computers & Networks - STDVU122

IEEE VUSPEC VOL III CD;Safety & Security Standards Series, Volume III: Electrical - STDVU123

IEEE WIRELESS COMMUNICATIONS;A Study of IEEE 802.11, 802.15, and 802.16 - SP1134

IEEE WIRELESS DICTIONARY;Wireless Dictonary - SP1142

IEEE WIRELESS MULTIMEDIA;A Guide to the IEEE 802.15.3 Standard - SP1132

IEEE WIRELESSMAN;Inside the IEEE 802.16 Standard for Wireless Metropolitan Area Networks - SP1146

IEEE Y32.9;Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction

IPC 0040 CD;Optoelectronics Assembly and Packaging Technology - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 0040;Optoelectronics Assembly and Packaging Technology

IPC 1065 CD;Material Declaration Handbook - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 1065;Material Declaration Handbook

IPC 1071 CD;Best Industry Practices for Intellectual Property Protection in Printed Board Manufacturing

IPC 1071;Best Industry Practices for Intellectual Property Protection in Printed Board Manufacturing

IPC 1131 CD;Information Technology (IT) Guide for PWB Manufacturers - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 1131;Information Technology (IT) Guide for PWB Manufacturers

IPC 1331;Voluntary Safety Standard for Electrically Heated Process Equipment

IPC 1601 CD;Printed Board Handling and Storage Guidelines - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 1601;Printed Board Handling and Storage Guidelines

IPC 1710A;OEM Standard for Printed Board Manufacturers' Qualification Profile

IPC 1720A;Assembly Qualification Profile

IPC 1730A;Laminator Qualification Profile

IPC 1731;Strategic Raw Materials Supplier Qualification Profile

IPC 1751A;Generic Requirements for Declaration Process Managemnt - Incorporates Amendment 1: November 2012

IPC 1752A;Materials Declaration Management - Incorporates Amendment 1: November 2012; Amendment 2: February 2014

IPC 1755;Conflict Minerals Data Exchange Standard

IPC 1756;Manufacturing Process Data Management - Version 2.0

IPC 1758;Declaration Requirements for Shipping, Pack and Packing Materials

IPC 2141A CD;Design Guide for High-Speed Controlled Impedance Circuit Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2141A;Design Guide for High-Speed Controlled Impedance Circuit Boards

IPC 2152 CD;Standard for Determining Current Carrying Capacity in Printed Board Design - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2152;Standard for Determining Current Carrying Capacity in Printed Board Design

IPC 2220 SERIES CD;2220 Series of Design Documents - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2220 SERIES;2220 Series of Design Documents - Set OF 5 Standards (2221,2222,2223,2224,2225 and 2226)

IPC 2221A CD;Generic Standard on Printed Board Design - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2221B;Generic Standard on Printed Board Design

IPC 2222A CD;Sectional Design Standard for Rigid Organic Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2222A GERMAN CD;Sectional Design Standard for Rigid Organic Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2222A;Sectional Design Standard for Rigid Organic Printed Boards

IPC 2223B CD;Sectional Design Standard for Flexible Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2223C GERMAN;Sectional Design Standard for Flexible Printed Boards

IPC 2223C;Sectional Design Standard for Flexible Printed Boards

IPC 2224 CD;Sectional Standard for Design of PWBs for PC Cards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2224;Sectional Standard for Design of PWBs for PC Cards

IPC 2225 CD;Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2225;Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies

IPC 2226 CD;Sectional Design Standard for High Density Interconnect (HDI) Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2226;Sectional Design Standard for High Density Interconnect (HDI) Printed Boards

IPC 2251 CD;Design Guide for the Packaging of High Speed Electronic Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2251;Design Guide for the Packaging of High Speed Electronic Circuits

IPC 2252 CD;Design Guide for RF Microwave Circuit Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2252;Design Guide for RF Microwave Circuit Boards

IPC 2316 CD;Design Guide for Embedded Passive Device Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2316;Design Guide for Embedded Passive Device Printed Boards

IPC 2501;Definition for Web-Based Exchange of XML Data (Message Broker)

IPC 2511B;Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer MXL Schema Methodology

IPC 2512A;Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description [ADMIN]

IPC 2513A;Sectional Requirements for Implementation of Drawing Methods for Manufacturing Data Description [DRAWG]

IPC 2514A;Sectional Requirements for Implementation of Printed Board Fabrication Data Description [BDFAB]

IPC 2515A;Sectional Requirements for Implementation of Bare Board Product Electrical Testing Data Description [BDTST]

IPC 2516A;Sectional Requirements for Implementation of Assembled Board Product Manufacturing Data Description [BDASM]

IPC 2517A;Sectional Requirements for Implementation of Assembly In-Circuit Testing Data Description [ASEMT]

IPC 2518A;Sectional Requirements for Implementation of Part List Product Data Description [PTLST]

IPC 2524;PWB Fabrication Data Quality Rating System

IPC 2531;SMEMA Standard Recipe File Format Specification

IPC 2541;Generic Requirements for Electronics Manufacturing Shop-Floor Equipment Communication Messages (CAMX)

IPC 2546 AMD 2;Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly

IPC 2546;Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly - Incorporates Amendment 1: January 2003

IPC 2547;Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Test, Inspection and Rework

IPC 2571;Generic Requirements for Electronics Manufacturing Supply Chain Communication - Product Data eXchange (PDX)

IPC 2576;Sectional Requirements for Electronics Manufacturing Supply Chain Communication of As-Built Product Data - Product Data eXchange (PDX)

IPC 2578;Sectional Requirements for Supply Chain Communication of Bill of Material and Product Design Configuration Data - Product Data eXchange (PDX)

IPC 2581B CD;Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 2581B;Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

IPC 2582;Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description

IPC 2583;Sectional Requirements for Implementation of Design Characteristics for Manufacturing Data Description

IPC 2584;Sectional Requirements for Implementation of Printed Board Fabrication Data Description

IPC 2588;Sectional Requirements for Implementation of Part List Product Data Description

IPC 2611 CD;Generic Requirements for Electronic Product Documentation - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2611;Generic Requirements for Electronic Product Documentation

IPC 2612 CD;Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2612;Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)

IPC 2612-1 CD;Sectional Requirements for Electronic Diagramming Symbol Generation Methodology - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2612-1;Sectional Requirements for Electronic Diagramming Symbol Generation Methodology

IPC 2614 CD;Sectional Requirements for Board Fabrication Documentation - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2614;Sectional Requirements for Board Fabrication Documentation

IPC 2615 CD;Printed Board Dimensions and Tolerances - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 2615;Printed Board Dimensions and Tolerances

IPC 3406 CD;Guidelines for Electrically Conductive Surface Mount Adhesives - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 3406;Guidelines for Electrically Conductive Surface Mount Adhesives

IPC 3408 CD;General Requirements for Anisotropically Conductive Adhesive Films - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 3408;General Requirements for Anisotropically Conductive Adhesive Films

IPC 4101D CD;Specification for Base Materials for Rigid and Multilayer Printed Boards - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare GED Comm: STANDALONE VERSION-CONTACT IHS FOR NETWORKING

IPC 4101D;Specification for Base Materials for Rigid and Multilayer Printed Boards

IPC 4103A CD;Specification for Base Materials for High Speed High Frequency Applications - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4103A;Specification for Base Materials for High Speed High Frequency Applications - Incorporates Amendment 1: January 2014

IPC 4110 CD;Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4110;Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards

IPC 4121 CD;Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Board Applications - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4121;Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Board Applications

IPC 4130 CD;Specification and Characterization Methods for Nonwoven "E" Glass Mat - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4130;Specification and Characterization Methods for Nonwoven "E" Glass Mat

IPC 4202A CD;Flexible Base Dielectrics for Use in Flexible Printed Circuitry - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4202A;Flexible Base Dielectrics for Use in Flexible Printed Circuitry

IPC 4203A CD;Cover and Bonding Material for Flexible Printed Circuitry - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 4203A;Cover and Bonding Material for Flexible Printed Circuitry

IPC 4204A CD;Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry - Incorporates AMD 1: 10 2013; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4204A;Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry - Incorporated Amd 1: 10 2013

IPC 4411A CD;Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4411A;Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement

IPC 4412B CD;Specification for Finished Fabric Woven from "E" Glass for Printed Boards - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 4412B;Specification for Finished Fabric Woven from "E" Glass for Printed Boards

IPC 4552 CD;Specification for Electroless Nickel Immersion Gold (ENIG) Plating for Printed Circuit Boards - Incorporates Amendments 1 & 2; On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 4552;Specification for Electroless Nickel Immersion Gold (ENIG) Plating for Printed Circuit Boards - Incorporates Amendments 1 & 2

IPC 4553A CD;Specification for Immersion Silver Plating for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4553A;Specification for Immersion Silver Plating for Printed Boards

IPC 4554 CD;Specification for Immersion Tin Plating for Printed Circuit Boards - Incorporates Amendment 1: January 2012; CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4554;Specification for Immersion Tin Plating for Printed Circuit Boards - Incorporates Amendment 1: January 2012

IPC 4556 CD;Specification for Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) Plating for Printed Circuit Boards - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 4556;Specification for Electroless Nickel Electroless Palladium  Immersion Gold (ENEPIG) Plating for Printed Circuit Boards

IPC 4562A CD;Metal Foil for Printed Board Applications - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4562A;Metal Foil for Printed Board Applications

IPC 4563 CD;Resin Coated Copper Foil for Printed Boards Guideline - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4563;Resin Coated Copper Foil for Printed Boards Guideline

IPC 4761 CD;Design Guide for Protection of Printed Board Via Structures - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4761;Design Guide for Protection of Printed Board Via Structures

IPC 4781 CD;Design Qualification and Performance Specification of Permanent, Semi-Permanent and Temporary Legend and or Marking Inks - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4781;Qualification and Performance Specification of Permanent, Semi-Permanent and Temporary Legend and or Marking Inks

IPC 4811 CD;Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4811;Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards

IPC 4821 CD;Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 4821;Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards

IPC 4921;Requirements for Printed Electronics Base Materials (Substrates)

IPC 5701 CD;Users Guide for Cleanliness of Unpopulated Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 5701;Users Guide for Cleanliness of Unpopulated Printed Boards

IPC 5702 CD;Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 5702;Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

IPC 5703 CD;Cleanliness Guidelines for Printed Board Fabricators - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 5703;Cleanliness Guidelines for Printed Board Fabricators

IPC 5704 CD;Cleanliness Requirements for Unpopulated Printed Boards

IPC 5704;Cleanliness Requirements for Unpopulated Printed Boards

IPC 6010 SERIES CD;Set of 6011, 6012, 6013, 6015, 6016, 6017, and 6018 - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 6010 SERIES;Set of 6011,6012,6013,6015,6016, 6017 AND 6018

IPC 6011 CD;Generic Performance Specification for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 6011;Generic Performance Specification for Printed Boards

IPC 6012C CD;Qualification and Performance Specification for Rigid Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 6012C;Qualification and Performance Specification for Rigid Printed Boards

IPC 6013B CD;Qualification and Performance Specification for Flexible Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 6013C;Qualification and Performance Specification for Flexible Printed Boards

IPC 6015;Qualification and Performance Specification for Organic Multichip Module (MCM-L) Mounting and Interconnecting Structures

IPC 6016;Qualification and Performance Specification for High Density Interconnect (HDI) Layers or Boards

IPC 6017;Qualification and Performance Specification for Printed Boards Containing Embedded Passive Devices

IPC 6018B CD;Qualification and Performance Specification for High Frequency (Microwave) Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 6018B;Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

IPC 7093 CD;Design and Assembly Process Implementation for Bottom Termination Components - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7093;Design and Assembly Process Implementation for Bottom Termination Components

IPC 7094;Design and Assembly Process Implementation for Flip Chip and Die Size Components

IPC 7095C CD;Design and Assembly Process Implementation for BGAs - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 7095C;Design and Assembly Process Implementation for BGAs

IPC 7351B CD;Generic Requirements for Surface Mount Design and Land Pattern Standard - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7351B;Generic Requirements for Surface Mount Design and Land Pattern Standard - Includes Access to Additional Content; Includes CD-ROM; Subscription customers can obtain one complimentary copy from IHS by contacting IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 7525B CD;Stencil Design Guidelines - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7525B CHINESE CD;Stencil Design Guidelines - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7525B GERMAN CD;Stencil Design Guidelines - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 7525B GERMAN;Stencil Design Guidelines

IPC 7525B;Stencil Design Guidelines

IPC 7526;Stencil and Misprinted Board Cleaning Handbook

IPC 7527 CD;Requirements for Solder Paste Printing - On CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7527;Requirements for Solder Paste Printing

IPC 7530;Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC 7530;Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave) - Hungarian

IPC 7711B 7721B CD;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7711B 7721B FRENCH CD;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 7711B 7721B FRENCH;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES

IPC 7711B 7721B GERMAN CD;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7711B 7721B HUNGARIAN CD;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES (Hungarian Language) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7711B 7721B HUNGARIAN;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES (Hungarian Language)

IPC 7711B 7721B KOREAN;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES

IPC 7711B 7721B;REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES

IPC 7912A CD;End-Item DPMO for Printed Circuit Board Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 7912A;End-Item DPMO for Printed Circuit Board Assemblies

IPC 8413-1 CD;Specification for Process Carriers Used to Handle Optical Fibers in Manufacturing - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 8413-1;Specification for Process Carriers Used to Handle Optical Fibers in Manufacturing

IPC 8497-1 CD;Cleaning Methods and Contamination Assessment for Optical Assembly - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 8497-1;Cleaning Methods and Contamination Assessment for Optical Assembly

IPC 9151D;Process Capability, Quality, and Relative Reliability (PCQR2) Benchmark Test Standard and Database

IPC 9191 CD;General Guidelines for Implementation of Statistical Process Control (SPC) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9191;General Guidelines for Implementation of Statistical Process Control (SPC)

IPC 9194;Implementation of Statistical Process Control (SPC) Applied to Printed Board Assembly Manufacture Guideline

IPC 9199;Statistical Process Control (SPC) Quality Rating

IPC 9201A CD;Surface Insulation Resistance Handbook - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9201A;Surface Insulation Resistance Handbook

IPC 9202 CD;Material and Process Characterization Qualification Test Protocol for Assessing Electrochemical Performance - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9202;Material and Process Characterization Qualification Test Protocol for Assessing Electrochemical Performance

IPC 9203 CD;Users Guide to IPC-9202 and the IPC-b-52 Standard Test Vehicle - On CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9203;Users Guide to IPC-9202 and the IPC-B-52 Standard Test Vehicle

IPC 9251;Test Vehicles for Evaluating Fine Line Capability

IPC 9252A AMD 1;Requirements for Electrical Testing of Unpopulated Printed Boards

IPC 9252A CD;Requirements for Electrical Testing of Unpopulated Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9252A;Requirements for Electrical Testing of Unpopulated Printed Boards

IPC 9261A CD;In-Process DPMO and Estimated Yield for PCAs - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9261A;In-Process DPMO and Estimated Yield for PCAs

IPC 9501;PWB Assembly Process Simulation for Evaluation of Electronic Components

IPC 9502;PWB Assembly Soldering Process Guideline for Electronic Components

IPC 9504 CD;Assembly Process Simulation for Evaluation of Non-IC Components (Preconditioning Non-IC Components) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9504;Assembly Process Simulation for Evaluation of Non-IC Components (Preconditioning Non-IC Components)

IPC 9591;Performance Parameters (Mechanical, Electrical, Environmental and Quality Reliability) for Air Moving Devices

IPC 9592B CD;Requirements for Power Conversion Devices for the Computer and Telecommunications Industries - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9592B;Requirements for Power Conversion Devices for the Computer and Telecommunications Industries

IPC 9631 CD;Users Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9631 GERMAN CD;Users Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9631 GERMAN;Users Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

IPC 9631;Users Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

IPC 9641 CD;High Temperature Printed Board Flatness Guideline - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9641;High Temperature Printed Board Flatness Guideline

IPC 9691A CD GERMAN;User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing) - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC 9691A CD;User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9691A GERMAN;User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

IPC 9691A;User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

IPC 9701A CD;Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9701A;Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments

IPC 9708 CD;Test Methods for Characterization of Printed Board Assembly Pad Cratering - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9708;Test Methods for Characterization of Printed Board Assembly Pad Cratering

IPC 9709;Test Guidelines for Acoustic Emission Measurement during Mechanical Testing

IPC 9850A CD;Surface Mount Placement Equipment Characterization - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9850A;Surface Mount Placement Equipment Characterization

IPC 9850-TM-K;Test Materials Kit for Surface Mount Placement Equipment Standardization - components negative image - WITHOUT white backgrounds - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC 9850-TM-KW;Test Materials Kit for Surface Mount Placement Equipment Standardization - components negative image - WITH white backgrounds - To Purchase Call 1-800-854-7179 USA CANADA or 303-397-7956

IPC 9851;SMEMA Standard Mechanical Equipment Interface Standard

IPC A-142 CD;Specification for Finished Fabric Woven from Aramid for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-142;Specification for Finished Fabric Woven from Aramid for Printed Boards

IPC A-311 CD;Process Controls for Photo Tool Generation and Use - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-311;Process Controls for Phototool Generation and Use

IPC A-600H CD;Acceptability of Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-600H FRENCH;Acceptability of Printed Boards

IPC A-600H RUSSIAN;Acceptability of Printed Boards

IPC A-600H;Acceptability of Printed Boards

IPC A-610E CD;Acceptability of Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-610E CZECH CD;Acceptability of Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-610E CZECH;Acceptability of Electronic Assemblies

IPC A-610E HEBREW;Acceptability of Electronic Assemblies (Hebrew)

IPC A-610E HINDI CD;Acceptability of Electronic Assemblies (Hindi Language) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-610E HINDI;Acceptability of Electronic Assemblies (Hindi Language)

IPC A-610E HUNGARIAN CD;Elektronikai szerelvények elfogadhatósága (Hungarian Language) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-610E HUNGARIAN;Acceptability of Electronic Assemblies (Hungarian Language)

IPC A-610E ROMANIAN CD;Acceptability of Electronic Assemblies - Title Extension: To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-610E ROMANIAN;Acceptability of Electronic Assemblies

IPC A-610E;Acceptability of Electronic Assemblies

IPC A-630 CD;Acceptability Standard for Manufacture, Inspection and Testing of Electronic Enclosures - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC A-630;Acceptability Standard for Manufacture, Inspection and Testing of Electronic Enclosures

IPC AJ-820A CD;Assembly and Joining Handbook - CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC AJ-820A;Assembly and Joining Handbook

IPC C-1000;IPC Essential Document Collection for Board Design, Assembly and Manufacture - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-102;FLEXIBLE PRINTED BOARD STANDARDS COLLECTION - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-103;ELECTRONICS ASSEMBLY STANDARDS COLLECTION - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-105;RIGID PRINTED BOARD STANDARDS COLLECTION - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-106;PRINTED BOARD DESIGN STANDARDS COLLECTION - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC C-107;PRINTED BOARD MATERIALS STANDARDS COLLECTION - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-108;Cleaning Guides and Handbooks Collection - To Purchase Hardcopy Compilation, Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide. Standards from this compilation are available as individual documents in IHS Standards Expert. See Details for additional information.

IPC C-406 CD;Design and Application Guidelines for Surface Mount Connectors - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC C-406;Design and Application Guidelines for Surface Mount Connectors

IPC CA-821 CD;General Requirements for Thermally Conductive Adhesives - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CA-821;General Requirements for Thermally Conductive Adhesives

IPC CC-830B CD;Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CC-830B;Qualification and Performance of Electrical Insulating Compound for Printed Wiring Assemblies - Incorporates Amendment 1: October 2008

IPC CF-152B CD;Composite Metallic Material Specification for Printed Wiring Board - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CF-152B;Composite Metallic Material Specification for Printed Wiring Board

IPC CH-65B CD CHINESE;Guidelines for Cleaning of Printed Boards and Assemblies - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare GED Comm: STANDALONE VERSION-CONTACT IHS FOR NETWORKING

IPC CH-65B CD;Guidelines for Cleaning of Printed Boards and Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CH-65B CHINESE;Guidelines for Cleaning of Printed Boards and Assemblies

IPC CH-65B;Guidelines for Cleaning of Printed Boards and Assemblies

IPC CI-408 CD;Solderless Surface Mount Connector Design Characteristics and Application Guidelines - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CI-408;Solderless Surface Mount Connector Design Characteristics and Application Guidelines

IPC CM-770E CD;Guidelines for Printed Board Component Mounting - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC CM-770E;Guidelines for Printed Board Component Mounting

IPC CMDD;IPC Conflict Minerals Due Diligence Guide

IPC D-279 CD;Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-279;Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies

IPC D-310C CD;Guidelines for Phototool Generation and Measurement Techniques - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-310C;Guidelines for Phototool Generation and Measurement Techniques

IPC D-322 CD;Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-322;Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes

IPC D-325A CD;Documentation Requirements for Printed Boards, Assemblies and Support Drawings - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-325A;Documentation Requirements for Printed Boards, Assemblies and Support Drawings

IPC D-326A CD;Information Requirements for Manufacturing Printed Boards and Other Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-326A;Information Requirements for Manufacturing Printed Boards and Other Electronic Assemblies

IPC D-330;Design Guide Manual

IPC D-350D CD;Printed Board Description in Digital Form - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-350D;Printed Board Description in Digital Form

IPC D-351 CD;Printed Board Drawings in Digital Form - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-351;Printed Board Drawings in Digital Form

IPC D-352 CD;Electronic Design Data Description for Printed Boards in Digital Form - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-352;Electronic Design Data Description for Printed Boards in Digital Form

IPC D-354 CD;Library Format Description for Printed Boards in Digital Form - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-354;Library Format Description for Printed Boards in Digital Form

IPC D-355 CD;Printed Board Assembly Description in Digital Form - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-355;Printed Board Assembly Description in Digital Form

IPC D-356B CD;Bare Substrate Electrical Test Data Format - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-356B;Bare Substrate Electrical Test Data Format

IPC D-390A CD;Automated Design Guidelines - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-390A;Automated Design Guidelines

IPC D-422 CD;Design Guide for Press Fit Rigid Printed Board Backplanes - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-422;Design Guide for Press Fit Rigid Printed Board Backplanes

IPC D-859 CD;Design Standard for Thick Film Multilayer Hybrid Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC D-859;Design Standard for Thick Film Multilayer Hybrid Circuits

IPC DR-572A CD;Drilling Guidelines for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DR-572A;Drilling Guidelines for Printed Boards

IPC DRM-18H;Component Identification Training and Reference Guide - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide.

IPC DRM-53;Introduction to Electronics Assembly - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DRM-PTH-E;Through-Hole Solder Evaluation Training & Reference Guide - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide.

IPC DRM-SMT-E;Surface Mount Solder Evaluation Training & Reference Guide - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-92C;DVD: Rework of Surface Mount Chip Components - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-97ABC;Land & Conductor Repair for Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-97CC;DVD: Plated-Through Hole Repair - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-FR42C;DVD: Hand Soldering for Through Hole Components (Tin-Lead) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-FR92C;DVD: Rework of Surface Mount Chip Components - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-FR93C;DVD: Gull Wing Rework - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DVD-FR94C;DVD: Rework of J-Lead Components - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DW-424 CD;General Specification for Encapsulated Discrete Wire Interconnection Board - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DW-424;General Specification for Encapsulated Discrete Wire Interconnection Board

IPC DW-425A CD;Design and End Product Requirements for Discrete Wiring Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DW-425A;Design and End Product Requirements for Discrete Wiring Boards

IPC DW-426 CD;Specifications for Assembly of Discrete Wiring - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC DW-426;Specifications for Assembly of Discrete Wiring

IPC FA-251 CD;Assembly Guidelines for Single-Sided and Double- Sided Flexible Printed Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC FA-251;Assembly Guidelines for Single-Sided and Double- Sided Flexible Printed Circuits

IPC FC-234 CD;PSA Assembly Guidelines for Single-Sided and Double-Sided Flexible Printed Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC FC-234;PSA Assembly Guidelines for Single-Sided and Double-Sided Flexible Printed Circuits

IPC HDBK-001E CD;Handbook and Guide to Supplement J-STD-001 - CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC HDBK-001E;Handbook and Guide to Supplement J-STD-001

IPC HDBK-005 CD;Guide to Solder Paste Assessment - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC HDBK-005;Guide to Solder Paste Assessment

IPC HDBK-830A CD;Guidelines for Design, Selection and Application of Conformal Coatings - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC HDBK-830A;Guidelines for Design, Selection and Application of Conformal Coatings

IPC HDBK-840 CD;Solder Mask Handbook - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC HDBK-840;Solder Mask Handbook

IPC HDBK-850;Guidelines for Design, Selection and Application of Potting Materials and Encapsulation Processes Used for Electronics Printed Circuit Board Assembly

IPC HM-860 CD;Specification for Multilayer Hybrid Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC HM-860;Specification for Multilayer Hybrid Circuits

IPC IPC EIA J-STD-026 CD;Semiconductor Design Standard for Flip Chip Applications - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC EIA J-STD-026;Semiconductor Design Standard for Flip Chip Applications

IPC IPC EIA J-STD-028 CD;Performance Standard for Construction of Flip Chip and Chip Scale Bumps - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC EIA J-STD-028;Performance Standard for Construction of Flip Chip and Chip Scale Bumps

IPC IPC ENVIRONMENT;Printed Circuit Board Industry an Environmental Best Practice Guide

IPC IPC JEDEC J-STD-002D;Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

IPC IPC JEDEC J-STD-020D.1 CD;Moisture Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC J-STD-020D.1;Moisture Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices

IPC IPC JEDEC J-STD-033C CD;Handling, Packing, Shipping and Use of Moisture Reflow Sensitive Surface Mount Devices - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC J-STD-033C GERMAN CD;Solderability Tests for Printed Boards - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC IPC JEDEC J-STD-033C GERMAN;Solderability Tests for Printed Boards

IPC IPC JEDEC J-STD-033C HUNGARIAN CD;Handling, Packing, Shipping, and Use of Moisture Reflow and or Process Sensitive Components - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC IPC JEDEC J-STD-033C HUNGARIAN;Handling, Packing, Shipping and Use of Moisture Reflow Sensitive Surface Mount Devices

IPC IPC JEDEC J-STD-033C;Handling, Packing, Shipping and Use of Moisture Reflow Sensitive Surface Mount Devices

IPC IPC JEDEC J-STD-035 CD;Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components - Incorporates Amendment 1: January 2007; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC J-STD-035;Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components

IPC IPC JEDEC J-STD-075 CD;Classification of Non-IC Electronic Components for Assembly Processes - Incorporates Amendment 1: January 2007; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC J-STD-075;Classification of Non-IC Electronic Components for Assembly Processes

IPC IPC JEDEC J-STD-609A CD;Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC J-STD-609A;Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes

IPC IPC JEDEC-9702 CD;Monotonic Bend Characterization of Board-Level Interconnects - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC-9702;Monotonic Bend Characterization of Board-Level Interconnects

IPC IPC JEDEC-9703 CD;Mechanical Shock Test Guidelines for Solder Joint Reliability - Incorporates Amendment 1: January 2007; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC-9703;Mechanical Shock Test Guidelines for Solder Joint Reliability

IPC IPC JEDEC-9704A CD;Printed Circuit Assembly Strain Gage Test Guideline - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC-9704A;Printed Circuit Assembly Strain Gage Test Guideline

IPC IPC JEDEC-9706;Mechanical Shock In-situ Electrical Metrology Test Guidelines for FCBGA SMT Component Solder Crack and Pad Crater Trace Crack Detection

IPC IPC JEDEC-9707 CD;Spherical Bend Test Method for Characterization of Board Level Inerconnects - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JEDEC-9707;Spherical Bend Test Method for Characterization of Board Level Interconnects

IPC IPC JPCA-2315 CD;Design Guide for High Density Interconnects (HDI) and Microvias - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JPCA-2315;Design Guide for High Density Interconnects (HDI) and Microvias

IPC IPC JPCA-4104 CD;Specification for High Density Interconnect (HDI) and Microvia Materials - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JPCA-4104;Specification for High Density Interconnect (HDI) and Microvia Materials

IPC IPC JPCA-4591 CD;Requirements for Printed Electronics Functional Conductive Materials - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC IPC JPCA-4591;Requirements for Printed Electronics Functional Conductive Materials

IPC IPC JPCA-6202 CD;Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JPCA-6202;Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring Boards

IPC IPC JPCA-6801 CD;Terms and Definitions, Test Methods, and Design Examples for Build-Up High Density Interconnect (HDI) Printed Wiring Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC JPCA-6801;Terms and Definitions, Test Methods, and Design Examples for Build-Up High Density Interconnect (HDI) Printed Wiring Boards

IPC IPC WHMA A-620B CD;Requirements and Acceptance for Cable and Wire Harness Assemblies - On CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC IPC WHMA-A-620B GERMAN;Requirements and Acceptance for Cable and Wire Harness Assemblies - with Amendment 1

IPC IPC WHMA-A-620B HUNGARIAN;Requirements and Acceptance for Cable and Wire Harness Assemblies - Hungarian

IPC IPC WHMA-A-620B SPANISH;Requirements and Acceptance for Cable and Wire Harness Assemblies

IPC IPC WHMA-A-620B;Requirements and Acceptance for Cable and Wire Harness Assemblies

IPC IPC WHMA-A-620B-S;Space Applications Electronic Hardware Addendum to IPC WHMA-A-620B

IPC JIG-101;Material Composition Declaration for Electrotechnical Products - Ed 4.0

IPC JP002;Current Tin Whiskers Theory and Mitigation Practices Guideline

IPC JPCA-2291 CD;Design Guideline for Printed Electronics - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC JPCA-2291;Design Guideline for Printed Electronics

IPC J-STD-001D ROMANIAN CD;Requirements for Soldered Electrical and Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-001D ROMANIAN;Requirements for Soldered Electrical and Electronic Assemblies

IPC J-STD-001E CD;Requirements for Soldered Electrical and Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-001E FRENCH CD;Requirements for Soldered Electrical and Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-001E FRENCH;Requirements for Soldered Electrical and Electronic Assemblies

IPC J-STD-001E HUNGARIAN CD;Requirements for Soldered Electrical and Electronic Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-001E HUNGARIAN;Requirements for Soldered Electrical and Electronic Assemblies - Hungarian

IPC J-STD-001E;Requirements for Soldered Electrical and Electronic Assemblies

IPC J-STD-001ES;Space Applications Electronic Hardware Addendum to IPC J-STD-001E Requirements for Soldered Electrical and Electronic Assemblies

IPC J-STD-002D CD;Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires - On CD-ROM - To Purchase Please Contact IHS Customer Care at +1 800 IHS-CARE (+1 800 447-2273) or visit www.ihs.com CustomerCare

IPC J-STD-003C CD;Solderability Tests for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-003C;Solderability Tests for Printed Boards

IPC J-STD-004B CD;Requirements for Soldering Fluxes - Incorporates Amendment 1: November 2011; CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-004B;Requirements for Soldering Fluxes - Incorporates Amendment 1: November 2011

IPC J-STD-005A CD;Requirements for Soldering Pastes - CD-ROM - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-005A;Requirements for Soldering Pastes

IPC J-STD-006C CD;Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

IPC J-STD-006C;Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

IPC J-STD-013 CD;Implementation of Flip Chip and Chip Scale Technology - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-027 CD;Mechanical Outline Standard for Flip Chip and Chip Size Configurations - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-027;Mechanical Outline Standard for Flip Chip and Chip Size Configurations

IPC J-STD-030 CD;Guideline for Selection and Application of Underfill Material for Flip Chip and Other Micropackages - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-030A;JOINT INDUSTRY STANDARD Selection and Application of Board Level Underfill Materials

IPC J-STD-032 CD;Performance Standard for Ball Grid Array Balls - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC J-STD-032;Performance Standard for Ball Grid Array Balls

IPC MB-380;Guidelines for Molded Interconnection Devices

IPC MC-790 CD;Guidelines for Multichip Module Technology Utilization - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC MC-790;Guidelines for Multichip Module Technology Utilization

IPC MI-660;Guidelines for Incoming Inspection of Printed Board Materials

IPC ML-950C;Performance Specification for Rigid Multilayer Printed Boards

IPC ML-960 CD;Qualification and Performance Specification for Mass Laminated Panels for Multilayer Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC ML-960;Qualification and Performance Specification for Mass Laminated Panels for Multilayer Printed Boards

IPC MS-810 CD;Guidelines for High Volume Microsection - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC MS-810;Guidelines for High Volume Microsection

IPC NC-349 CD;Computer Numerical Control Formatting for Drillers and Routers - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC NC-349;Computer Numerical Control Formatting for Drillers and Routers

IPC OI-645 CD;Standard for Visual Optical Inspection Aids - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC OI-645;Standard for Visual Optical Inspection Aids

IPC PD-335 HDBK;Electronic Packaging Handbook

IPC PE-740A CD;Troubleshooting for Printed Board Manufacture and Assembly - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC PE-740A;Troubleshooting for Printed Board Manufacture and Assembly

IPC QE-605A CD;Printed Board Quality Evaluation Handbook - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC QE-605A;Printed Board Quality Evaluation Handbook

IPC QF-143 CD;Specification for Finished Fabric Woven from Quartz (Pure Fused Silica) for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC QF-143;Specification for Finished Fabric Woven from Quartz (Pure Fused Silica) for Printed Boards

IPC QL-653A CD;Certification of Facilities That Inspect Test Printed Boards, Components and Materials - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC QL-653A;Certification of Facilities That Inspect Test Printed Boards, Components and Materials

IPC S-816 CD;SMT Process Guideline and Checklist - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC S-816;SMT Process Guideline and Checklist

IPC SG-141 CD;Specification for Finished Fabric Woven from "S" Glass for Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SG-141;Specification for Finished Fabric Woven from "S" Glass for Printed Boards

IPC SM-780 CD;Component Packaging and Interconnecting with Emphasis on Surface Mounting - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SM-780;Component Packaging and Interconnecting with Emphasis on Surface Mounting

IPC SM-784 CD;Guidelines for Chip-on- Board Technology Implementation - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SM-784;Guidelines for Chip-on- Board Technology Implementation

IPC SM-785 CD;Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SM-785;Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments

IPC SM-817 CD;General Requirements for Dielectric Surface Mounting Adhesives - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SM-817;General Requirements for Dielectric Surface Mounting Adhesives

IPC SM-840E CD;Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials - CD Rom - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SM-840E;Qualification and Performance Specification of Permanent Solder Mask and Flexible Cover Materials

IPC SMC-TR-001 CD;Introduction to Tape Automated Bonding & Fine Pitch Technology - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC SMC-TR-001;Introduction to Tape Automated Bonding & Fine Pitch Technology

IPC SMC-WP-001;Soldering Capability

IPC SMC-WP-003;Chip Mounting Technology (CMT)

IPC SMC-WP-004;Design for Success

IPC SMC-WP-005;PWB Surface Finishes

IPC SPVC-LAT1;ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA

IPC SPVC-WP-006;ROUND ROBIN TESTING AND ANALYSIS LEAD-FREE ALLOYS TIN, SILVER and COPPER

IPC T-50K CD;Terms and Definitions for Interconnecting and Packaging Electronic Circuits - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC T-50K;Terms and Definitions for Interconnecting and Packaging Electronic Circuits

IPC TA-720;Technology Assessment of Laminates

IPC TA-721;Technology Assessment of Multilayer Boards

IPC TA-722;Technology Assessment of Soldering

IPC TA-723;Technology Assessment of Surface Mounting

IPC TA-724;Technology Assessment Series on Cleanrooms

IPC TF-870 CD;Qualification and Performance of Polymer Thick Film Printed Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TF-870;Qualification and Performance of Polymer Thick Film Printed Boards

IPC TM-650 1.0D;Section One - Table of Contents

IPC TM-650 1.1C;Introduction

IPC TM-650 1.2A;Calibration

IPC TM-650 1.3A;Ambient Conditions

IPC TM-650 1.4A;Reporting, General

IPC TM-650 1.5A;Reporting, Format

IPC TM-650 1.6A;Numerical Reporting

IPC TM-650 1.7A;Reporting, Invalid Test Results

IPC TM-650 1.8 GUIDE;Measurement Precision Calculator Users Guide For Use with Test Method 1.8, Measurement Systems Analysis for Binary Data

IPC TM-650 1.8A;Measurement Precision Estimation for Binary Data

IPC TM-650 1.9 GUIDE;Measurement Precision Calculator Users Guide For Use with Test Method 1.9, Measurement Systems Analysis for Variables Data

IPC TM-650 1.9A;Measurement Precision Estimation for Variables Data

IPC TM-650 2.0;Printed Wiring Board Test Methods

IPC TM-650 2.1.1.1;Microsectioning, Ceramic Substrate

IPC TM-650 2.1.1.2A;Microsectioning-Semi or Automatic Technique Microsection Equipment (Alternate)

IPC TM-650 2.1.10A;Visual Inspection for Undissolved Dicyandiamide

IPC TM-650 2.1.13B;Inspection for Voids in Flexible Printed Board Materials

IPC TM-650 2.1.1E;Microsectioning, Manual Method

IPC TM-650 2.1.2A;Pinhole Evaluation, Dye Penetration Method

IPC TM-650 2.1.3A;Plated Through Hole Structure Evaluation

IPC TM-650 2.1.5A;Surface Examination, Unclad and Metal Clad Material

IPC TM-650 2.1.6.1;Weight of Fabric Reinforcements

IPC TM-650 2.1.6B;Thickness of Glass Fabric

IPC TM-650 2.1.7.1;Thread Count, Organic Fibers

IPC TM-650 2.1.7C;Thread Count of Glass Fabric

IPC TM-650 2.1.8B;Workmanship

IPC TM-650 2.1.9;Surface Scratch Examination Metal-Clad Foil

IPC TM-650 2.1;Visual Test Methods - Revision K

IPC TM-650 2.2.10A;Hole Location and Conductor Location

IPC TM-650 2.2.12.1;Overall Thickness and Profile Factor of Copper Foils Treated and Untreated

IPC TM-650 2.2.12.2;Weight and Thickness of Copper Foils with Releasable Carriers

IPC TM-650 2.2.12.3;Weight and Thickness Determination of Copper Foils with Etchable Carriers

IPC TM-650 2.2.12A;Thickness of Copper by Weight

IPC TM-650 2.2.13.1A;Thickness, Plating in Holes Micro-Ohms Method

IPC TM-650 2.2.14.1;Solder Powder Particle Size Distribution - Measuring Microscope Method

IPC TM-650 2.2.14.2;Solder Powder Particle Size Distribution - Optical Image Analyzer Method

IPC TM-650 2.2.14.3;Determination of Maximum Solder Powder Particle Size

IPC TM-650 2.2.14;Solder Powder Particle Size Distribution - Screen Method for Types 1-4

IPC TM-650 2.2.15;Cable Dimensions (Flat Cable)

IPC TM-650 2.2.16.1;Artwork Master Evaluation by Overlay

IPC TM-650 2.2.16;Artwork Master Evaluation by Use of a Drilled Panel

IPC TM-650 2.2.17A;Surface Roughness and Profile of Metallic Foils (Contacting Stylus Technique)

IPC TM-650 2.2.18.1;Determination of Thickness of Metallic Clad Laminates, Cross- Sectional

IPC TM-650 2.2.18;Determination of Thickness of Laminates by Mechanical Measurement

IPC TM-650 2.2.19.1;Length, Width and Perpendicularity of Laminate and Prepreg Panels

IPC TM-650 2.2.19;Measuring Hole Pattern Location

IPC TM-650 2.2.1A;Mechanical Dimensional Verification

IPC TM-650 2.2.20;Solder Paste Metal Content by Weight

IPC TM-650 2.2.21;Planarity of Dielectrics for High Density Interconnection (HDI) Microvia Technology

IPC TM-650 2.2.2B;Optical Dimensional Verification

IPC TM-650 2.2.4C;Dimensional Stability, Flexible Dielectric Materials

IPC TM-650 2.2.5A;Dimensional Inspections Using Microsections

IPC TM-650 2.2.6A;Hole Size Measurement, Drilled

IPC TM-650 2.2.7A;Hole Size Measurement, Plated

IPC TM-650 2.2.8;Location of Holes

IPC TM-650 2.2;Dimensional Test Methods - Revision J

IPC TM-650 2.3.1.1B;Chemical Cleaning of Metal Clad Laminate

IPC TM-650 2.3.1;Chemical Processing, Suitable Processing Material

IPC TM-650 2.3.10.1;Flammability of Soldermask on Printed Wiring Laminate

IPC TM-650 2.3.10B;Flammability of Laminate

IPC TM-650 2.3.11;Glass Fabric Construction

IPC TM-650 2.3.13A;Determination of Acid Value of Liquid Solder Flux - Potentiometric and Visual Titration Methods

IPC TM-650 2.3.14;Print, Etch and Plate Test

IPC TM-650 2.3.15D;Purity, Copper Foil or Plating

IPC TM-650 2.3.16.1C;Resin Content of Prepreg, by Treated Weight

IPC TM-650 2.3.16.2;Treated Weight of Prepreg

IPC TM-650 2.3.16B;Resin Content of Prepreg, by Burn-Off

IPC TM-650 2.3.17.1B;Resin Flow of Adhesive Coated Films and Unsupported Adhesive Films

IPC TM-650 2.3.17.2B;Resin Flow of "No Flow" Prepreg

IPC TM-650 2.3.17D;Resin Flow Percent of Prepreg

IPC TM-650 2.3.18A;Gel Time for Prepreg Materials

IPC TM-650 2.3.19C;Volatile Content of Prepreg

IPC TM-650 2.3.21A;Plating Quality Hull Cell Method

IPC TM-650 2.3.22;Copper Protective Coating Quality

IPC TM-650 2.3.23.1A;Cure (Permanency) UV Initiated Dry Film Solder Masks

IPC TM-650 2.3.23B;Cure (Permanency) Thermally Cured Solder Masks

IPC TM-650 2.3.24.1;Porosity Testing of Gold Electrodeposited on a Nickel Plated Copper Substrate Electrographic Method

IPC TM-650 2.3.24.2A;Porosity of Metallic Coatings on Copper-Base Alloys and Nickel (Nitric Acid Vapor Test)

IPC TM-650 2.3.24;Porosity of Gold Plating (Chemical Method)

IPC TM-650 2.3.25.1;Ionic Cleanliness Testing of Bare PWBs

IPC TM-650 2.3.25D;Detection and Measurement of Ionizable Surface Contaminants by Resistivity of Solvent Extract (ROSE)

IPC TM-650 2.3.27.1;Rosin Flux Residue Analysis - HPLC Method

IPC TM-650 2.3.27;Cleanliness Test - Residual Rosin

IPC TM-650 2.3.28.1;Halide Content of Soldering Fluxes and Pastes

IPC TM-650 2.3.28.2;Bare Printed Board Cleanliness by Ion Chromatography

IPC TM-650 2.3.28B;Ionic Analysis of Circuit Boards, Ion Chromatography Method

IPC TM-650 2.3.29;Flammability, Flexible Flat Cable

IPC TM-650 2.3.2G;Chemical Resistance of Flexible Printed Board Materials

IPC TM-650 2.3.30A;Solvent pH Determination in Anhydrous Fluorocarbon Solvents

IPC TM-650 2.3.31;Relative Degree of Cure in U.V. Curable Materials

IPC TM-650 2.3.32D;Flux Induced Corrosion (Copper Mirror Method)

IPC TM-650 2.3.33D;Presence of Halides in Flux, Silver Chromate Method

IPC TM-650 2.3.34.1B;Percentage of Flux on in Flux-Coated and or Flux-Cored Solder

IPC TM-650 2.3.34C;Solids Content, Flux

IPC TM-650 2.3.35.1A;Fluorides by Spot Test, Fluxes - Qualitative

IPC TM-650 2.3.35.2A;Fluoride Concentration, Fluxes - Quanitative

IPC TM-650 2.3.35C;Halide Content, Quantitative (Chloride & Bromide)

IPC TM-650 2.3.36;Acid Acceptance of Chlorinated Solvents

IPC TM-650 2.3.37B;Volatile Content of Adhesive Coated Dielectric Films

IPC TM-650 2.3.38C;Surface Organic Contaminant Detection Test

IPC TM-650 2.3.39C;Surface Organic Contaminant Identification Test (Infrared Analytical Method)

IPC TM-650 2.3.3A;Chemical Resistance of Insulated Materials

IPC TM-650 2.3.4.2A;Chemical Resistance of Laminates, Prepreg, and Coated Foil Products, by Solvent Exposure

IPC TM-650 2.3.4.3;Chemical Resistance of Core Materials to Methylene Chloride

IPC TM-650 2.3.40;Thermal Stability

IPC TM-650 2.3.41;Test Method for Total Halogen Content in Base Materials

IPC TM-650 2.3.42;Solder Mask - Resistance to Solvents and Cleaning Agents

IPC TM-650 2.3.4B;Chemical Resistance, Marking Paints and Inks

IPC TM-650 2.3.6A;Etching Ammonium Persulfate Method

IPC TM-650 2.3.7.1A;Cupric Chloride Etching Method

IPC TM-650 2.3.7.2A;Alkaline Etching Method

IPC TM-650 2.3.7A;Etching Ferric Chloride Method

IPC TM-650 2.3.8.1;Flammability of Flexible Printed Wiring

IPC TM-650 2.3.8A;Flammability, Flexible Insulating Materials

IPC TM-650 2.3.9D;Flammability of Prepreg and Thin Laminate

IPC TM-650 2.3;Chemical Test Methods - Revision Y

IPC TM-650 2.4.1.2;Adhesion of Conductors on Hybrid Substrates

IPC TM-650 2.4.1.3;Adhesion, Resistors (Hybrid Circuits)

IPC TM-650 2.4.1.4;Adhesion, Overglaze (Hybrid Circuits)

IPC TM-650 2.4.1.5A;Determination of Treatment Transfer

IPC TM-650 2.4.1.6;Adhesion, Polymer Coating

IPC TM-650 2.4.11;Shear Strength Flexible Dielectric Materials

IPC TM-650 2.4.12A;Solderability, Edge Dip Method

IPC TM-650 2.4.13.1;Thermal Stress of Laminates

IPC TM-650 2.4.13F;Solder Float Resistance Flexible Printed Wiring Materials

IPC TM-650 2.4.14.1;Solderability, Wave Solder Method

IPC TM-650 2.4.14.2A;Liquid Flux Activity, Wetting Balance Method

IPC TM-650 2.4.14;Solderability of Metallic Surfaces

IPC TM-650 2.4.15A;Surface Finish, Metal Foil

IPC TM-650 2.4.16A;Initiation Tear Strength, Flexible Insulating Materials

IPC TM-650 2.4.17.1B;Propagation Tear Strength, Flexible Insulating Material

IPC TM-650 2.4.17;Tear Strength (Propagation)

IPC TM-650 2.4.18.1A;Tensile Strength and Elongation, In-House Plating

IPC TM-650 2.4.18.2;Hot Rupture Strength, Foil

IPC TM-650 2.4.18.3;Tensile Strength, Elongation, and Modulus

IPC TM-650 2.4.18B;Tensile Strength and Elongation, Copper Foil

IPC TM-650 2.4.19C;Tensile Strength and Elongation, Flexible Printed Wiring Materials

IPC TM-650 2.4.1E;Adhesion, Tape Testing

IPC TM-650 2.4.2.1D;Flexural Fatigue and Ductility, Foil

IPC TM-650 2.4.20;Terminal Bond Strength, Flexible Printed Wiring

IPC TM-650 2.4.21F;Land Bond Strength, Unsupported Component Hole

IPC TM-650 2.4.22.1C;Bow and Twist - Laminate

IPC TM-650 2.4.22.2;Substrate Curvature: Silicon Wafers with Deposited Dielectrics

IPC TM-650 2.4.22C;Bow and Twist (Percentage)

IPC TM-650 2.4.23;Soldering Resistance of Laminate Materials

IPC TM-650 2.4.24.1;Time to Delamination (TMA Method)

IPC TM-650 2.4.24.2;Glass Transition Temperature of Organic Films - DMA Method

IPC TM-650 2.4.24.3;Glass Transition Temperature of Organic Films - TMA Method

IPC TM-650 2.4.24.4;Glass Transition and Modulus of Materials Used in High Density Interconnection (HDI) and Microvias - DMA Method

IPC TM-650 2.4.24.5;Glass Transition Temperature and Thermal Expansion of Materials Used in High Density Interconnection (HDI) and Microvias - TMA Method

IPC TM-650 2.4.24.6;TEST METHODS MANUAL

IPC TM-650 2.4.24C;Glass Transition Temperature and Z-Axis Thermal Expansion by TMA

IPC TM-650 2.4.25C;Glass Transition Temperature and Cure Factor by DSC

IPC TM-650 2.4.26;Tape Test for Additive Printed Boards

IPC TM-650 2.4.27.1B;Abrasion (Taber Method) Solder Mask and Conformal Coating

IPC TM-650 2.4.27.2A;Solder Mask Abrasion (Pencil Method)

IPC TM-650 2.4.28.1F;Solder Mask Adhesion - Tape Test Method

IPC TM-650 2.4.28B;Adhesion, Solder Mask (Non-Melting Metals)

IPC TM-650 2.4.29C;Solder Mask - Adhesion to Flexible Circuits

IPC TM-650 2.4.2A;Ductility of Copper Foil

IPC TM-650 2.4.3.1C;Flexural Fatigue and Ductility, Flexible Printed Wiring

IPC TM-650 2.4.3.2C;Flexural Fatigue and Ductility, Flexible Metal-Clad Dielectrics

IPC TM-650 2.4.30;Impact Resistance, Polymer Film

IPC TM-650 2.4.31A;Folding, Flexible Flat Cable

IPC TM-650 2.4.32A;Fold Temperature Testing, Flexible Flat Cable

IPC TM-650 2.4.33C;Flexural Fatigue and Ductility, Flat Cable

IPC TM-650 2.4.34.1;Solder Paste Viscosity - T-Bar Spindle Method (Applicable at Less Than 300,000 Centerpoise)

IPC TM-650 2.4.34.2;Solder Paste Viscosity - Spiral Pump Method (Applicable for 300,000 to 1,600,000 Centipoise)

IPC TM-650 2.4.34.3;Solder Paste Viscosity - Spiral Pump Method (Applicable at Less Than 300,000 Centipoise)

IPC TM-650 2.4.34.4;Paste Flux Viscosity - T-Bar Spindle Method

IPC TM-650 2.4.34;Solder Paste Viscosity - T-Bar Spin Spindle Method (Applicable for 300,000 to 1,600,000 Centipoise)

IPC TM-650 2.4.35;Solder Paste - Slump Test

IPC TM-650 2.4.36C;Rework Simulation, Plated-Through Holes for Leaded Components

IPC TM-650 2.4.37.1A;Evaluation of Hand Soldering Tools for Printed Wiring Board Applications

IPC TM-650 2.4.37.2;Evaluation of Hand Soldering Tools on Heavy Thermal Loads

IPC TM-650 2.4.37A;Evaluation of Hand Soldering Tools for Terminal Connections

IPC TM-650 2.4.38A;Prepreg Scaled Flow Testing

IPC TM-650 2.4.39A;Dimensional Stability, Glass Reinforced Thin Laminates

IPC TM-650 2.4.3E;Flexural Endurance, Flexible Printed Board Materials

IPC TM-650 2.4.4.1A;Flexural Strength of Laminates (at Elevated Temperature)

IPC TM-650 2.4.40;Inner Layer Bond Strength of Multilayer Printed Circuit Boards

IPC TM-650 2.4.41.1A;Coefficient of Thermal Expansion by the Vitreous Silica (Quartz) Dilatometer Method

IPC TM-650 2.4.41.2A;Coefficient of Thermal Expansion-Strain Gage Method

IPC TM-650 2.4.41.3;In-Plane Coefficient of Thermal Expansion, Organic Films

IPC TM-650 2.4.41.4;Volumetric Thermal Expansion Polymer Coatings on Inorganic Substrates

IPC TM-650 2.4.41;Coefficient of Linear Thermal Expansion of Electrical Insulating Materials

IPC TM-650 2.4.42.1;High Temperature Mechanical Strength Retention of Adhesives

IPC TM-650 2.4.42.2;Die Shear Strength

IPC TM-650 2.4.42.3;Wire Bond Pull Strength

IPC TM-650 2.4.42;Torsional Strength of Chip Adhesives

IPC TM-650 2.4.43;Solder Paste - Solder Ball Test

IPC TM-650 2.4.44;Solder Paste - Tack Test

IPC TM-650 2.4.45;Solder Paste - Wetting Test

IPC TM-650 2.4.46A;Spread Test, Liquid, Paste or Solid Flux, or Flux Extracted from Solder Paste, Cored Wires or Preforms

IPC TM-650 2.4.47;Flux Residue Dryness

IPC TM-650 2.4.48;Spitting of Flux-Cored Wire Solder

IPC TM-650 2.4.49;Solder Pool Test

IPC TM-650 2.4.4B;Flexural Strength of Laminates (at Ambient Temperature)

IPC TM-650 2.4.5.1;Flexibility - Conformal Coating

IPC TM-650 2.4.5;Folding Endurance, Flexible Printed Wiring Materials

IPC TM-650 2.4.50;Thermal Conductivity, Polymer Films

IPC TM-650 2.4.51;Self Shimming Thermally Conductive Adhesives

IPC TM-650 2.4.6;Hot Oil

IPC TM-650 2.4.7.1;Solder Mask - Determination of Machineability

IPC TM-650 2.4.7A;Machinability, Printed Wiring Materials

IPC TM-650 2.4.8.1;Peel Strength, Metal Foil (Keyhole Method for Thin Laminates)

IPC TM-650 2.4.8.2A;Peel Strength of Metallic Clad Laminates at Elevated Temperature (Hot Fluid Method)

IPC TM-650 2.4.8.3A;Peel Strength of Metallic Clad Laminate at Elevated Temperature (Hot Air Method)

IPC TM-650 2.4.8.4;Carrier Release, Thin Copper

IPC TM-650 2.4.8C;Peel Strength of Metallic Clad Laminates

IPC TM-650 2.4.9.1;Peel Strength of Flexible Circuits

IPC TM-650 2.4.9.2;Bonding Process

IPC TM-650 2.4.9D;Peel Strength, Flexible Printed Wiring Materials

IPC TM-650 2.4;Mechanical Test Methods - Revision Z

IPC TM-650 2.5.10.1;Insulation Resistivity for Adhesive Interconnection Bonds

IPC TM-650 2.5.12;Interconnection Resistance, Multilayer Printed Wiring

IPC TM-650 2.5.13A;Resistance of Copper Foil

IPC TM-650 2.5.14A;Resistivity of Copper Foil

IPC TM-650 2.5.15A;Guidelines and Test Methods for RFI-EMI Shielding of Flat Cable

IPC TM-650 2.5.16A;Shorts, Internal on Multilayer Printed Wiring

IPC TM-650 2.5.17.1A;Volume and Surface Resistivity of Dielectric Materials

IPC TM-650 2.5.17.2;Volume Resistivity of Conductive Materials Used in High Density Interconnection (HDI) and Microvias, Two-Wire Method

IPC TM-650 2.5.17E;Volume Resistivity and Surface Resistance of Printed Wiring Materials

IPC TM-650 2.5.18B;Characteristic Impedance Flat Cables (Unbalanced)

IPC TM-650 2.5.19.1A;Propagation Delay of Flat Cables Using Dual Trace Oscilloscope

IPC TM-650 2.5.19A;Propagation Delay of Flat Cables Using Time Domain Reflectometer

IPC TM-650 2.5.1B;Arc Resistance of Printed Wiring Material

IPC TM-650 2.5.21A;Digital Unbalanced Crosstalk, Flat Cable

IPC TM-650 2.5.24;Conductor Resistance, Flexible Flat Cable

IPC TM-650 2.5.25A;Dielectric Withstand Voltage Flexible Flat Cable

IPC TM-650 2.5.26A;Insulation Resistance, Flexible Flat Cable

IPC TM-650 2.5.27;Surface Insulation Resistance of Raw Printed Wiring Board Material

IPC TM-650 2.5.28A;Q Resonance, Flexible Printed Wiring Materials

IPC TM-650 2.5.2A;Capacitance of Insulating Materials

IPC TM-650 2.5.30;Balanced and Unbalanced Cable Attenuation Measurements

IPC TM-650 2.5.31;Current Leakage (Through Overglaze Films)

IPC TM-650 2.5.32;Resistance Test, Plated Through Holes

IPC TM-650 2.5.33.1;Measurement of Electrical Overstress from Soldering Hand Tools - Ground Measurements

IPC TM-650 2.5.33.2;Measurement of Electrical Overstress from Soldering Hand Tools - Transient Measurements

IPC TM-650 2.5.33.3;Measurement of Electrical Overstress from Soldering Hand Tools - Current Leakage Measurements

IPC TM-650 2.5.33.4;Measurement of Electrical Overstress from Soldering Hand Tools - Shielded Enclosure

IPC TM-650 2.5.33;Measurement of Electrical Overstress from Soldering Hand Tools

IPC TM-650 2.5.34;Power Density Rating for Embedded Resistors

IPC TM-650 2.5.3B;Current Breakdown, Plated Through-Holes

IPC TM-650 2.5.4.1A;Conductor Temperature Rise Due to Current Changes in Conductors

IPC TM-650 2.5.4;Current Carrying Capacity, Multilayer Printed Wiring

IPC TM-650 2.5.5.10;High Frequency Testing to Determine Permittivity and Loss Tangent of Embedded Passive Materials

IPC TM-650 2.5.5.11;Propagation Delay of Lines on Printed Boards by TDR

IPC TM-650 2.5.5.12A;Test Methods to Determine the Amount of Signal Loss on Printed Boards

IPC TM-650 2.5.5.13;Relative Permittivity and Loss Tangent Using a Split-Cylinder Resonator

IPC TM-650 2.5.5.1B;Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Insulating Material at 1 MHz (Contacting Electrode Systems)

IPC TM-650 2.5.5.2A;Dielectric Constant and Dissipation Factor of Printed Wiring Board Material - Clip Method

IPC TM-650 2.5.5.3C;Permittivity (Dielectric Constant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid Cell Method)

IPC TM-650 2.5.5.4;Dielectric Constant and Dissipation Factor of Printed Wiring Board Material-Micrometer Method

IPC TM-650 2.5.5.5.1;Stripline Test for Complex Relative Permittivity of Circuit Board Materials to 14 GHz

IPC TM-650 2.5.5.5C;Stripline Test for Permittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) at X-Band

IPC TM-650 2.5.5.6;Non-Destructive Full Sheet Resonance Test for Permittivity of Clad Laminates

IPC TM-650 2.5.5.7A;Characteristic Impedance of Lines on Printed Boards by TDR

IPC TM-650 2.5.5.8;Low Frequency Dielectric Constant and Loss Tangent, Polymer Films

IPC TM-650 2.5.5.9;Permittivity and Loss Tangent, Parallel Plate, 1 MHz to 1.5 GHz

IPC TM-650 2.5.5A;Dielectric Constant of Printed Wiring Materials

IPC TM-650 2.5.6.1B;Solder Mask - Dielectric Strength

IPC TM-650 2.5.6.2A;Electric Strength of Printed Wiring Material

IPC TM-650 2.5.6.3;Dielectric Breakdown Voltage and Dielectric Strength

IPC TM-650 2.5.6B;Dielectric Breakdown of Rigid Printed Wiring Material

IPC TM-650 2.5.7.1;Dielectric Withstanding Voltage - Polymeric Conformal Coating

IPC TM-650 2.5.7.2A;Dielectric Withstanding Voltage (Hipot Method) - Thin Dielectric Layers for Printed Boards

IPC TM-650 2.5.7D;Dielectric Withstanding Voltage, PCB

IPC TM-650 2.5.8A;Dissipation Factor of Flexible Printed Wiring Material

IPC TM-650 2.5;Electrical Test Methods - Revision X

IPC TM-650 2.6.1.1;Fungus Resistance - Conformal Coating

IPC TM-650 2.6.10A;X-Ray (Radiography), Multilayer Printed Wiring Printed Board Test Methods

IPC TM-650 2.6.11.1;Hydrolytic Stability - Conformal Coating

IPC TM-650 2.6.11B;Hydrolytic Stability Solder Mask and Conformal Coatings

IPC TM-650 2.6.11D;Solder Mask - Hydrolytic Stability

IPC TM-650 2.6.12;Temperature Testing, Flexible Flat Cable

IPC TM-650 2.6.13;Assessment of Susceptibility to Metallic Dendritic Growth: Uncoated Printed Wiring

IPC TM-650 2.6.14.1;Electrochemical Migration Resistance Test

IPC TM-650 2.6.14D;Solder Mask - Resistance to Electrochemical Migration

IPC TM-650 2.6.15C;Corrosion, Flux

IPC TM-650 2.6.16.1;Moisture Resistance of High Density Interconnection (HDI) Materials Under High Temperature and Pressure (Pressure Vessel)

IPC TM-650 2.6.16;Pressure Vessel Method for Glass Epoxy Laminate Integrity

IPC TM-650 2.6.17;Hydrolytic Stability, Flexible Printed Wiring Material

IPC TM-650 2.6.18A;Low Temperature Flexibility, Flexible Printed Wiring Materials

IPC TM-650 2.6.19;Environmental and Insulation Resistance Test of Hybrid Ceramic Multilayer Substrate Boards

IPC TM-650 2.6.1G;Fungus Resistance of Printed Board Materials

IPC TM-650 2.6.2.1A;Water Absorption, Metal Clad Plastic Laminates

IPC TM-650 2.6.21B;Service Temperature of Metal-Clad Flexible Laminate, Cover Material and Adhesive Bonding Films

IPC TM-650 2.6.23;Test Procedure for Steam Ager Temperature Repeatability

IPC TM-650 2.6.24;Junction Stability Under Environmental Conditions

IPC TM-650 2.6.25A;Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis

IPC TM-650 2.6.26;DC Current Induced Thermal Cycling Test

IPC TM-650 2.6.27;Thermal Stress, Convection Reflow Assembly Simulation

IPC TM-650 2.6.28;Moisture Content and or Moisture Absorption Rate, (Bulk) Printed Board

IPC TM-650 2.6.2D;Moisture Absorption, Flexible Printed Wiring

IPC TM-650 2.6.3.1E;Solder Mask - Moisture and Insulation Resistance

IPC TM-650 2.6.3.2B;Insulation and Moisture Resistance, Flexible Base Dielectric

IPC TM-650 2.6.3.3B;Surface Insulation Resistance, Fluxes

IPC TM-650 2.6.3.4A;Moisture and Insulation Resistance - Conformal Coating

IPC TM-650 2.6.3.5;Bare Board Cleanliness by Surface Insulation Resistance

IPC TM-650 2.6.3.6;Surface Insulation Resistance - Fluxes - Telecommunications

IPC TM-650 2.6.3.7;Surface Insulation Resistance

IPC TM-650 2.6.3F;Moisture and Insulation Resistance, Printed Boards

IPC TM-650 2.6.4B;Outgassing, Printed Boards

IPC TM-650 2.6.5D;Physical Shock, Multilayer Printed Wiring

IPC TM-650 2.6.6B;Temperature Cycling, Printed Wiring Board

IPC TM-650 2.6.7.2B;Thermal Shock, Continuity and Microsection, Printed Board

IPC TM-650 2.6.7.3;Thermal Shock - Solder Mask

IPC TM-650 2.6.7A;Thermal Shock & Continuity, Printed Board

IPC TM-650 2.6.8.1;Thermal Stress, Laminate

IPC TM-650 2.6.8E;Thermal Stress, Plated-Through Holes

IPC TM-650 2.6.9.1;Test to Determine Sensitivity of Electronic Assemblies to Ultrasonic Energy

IPC TM-650 2.6.9.2;Test to Determine Sensitivity of Electronic Components to Ultrasonic Energy

IPC TM-650 2.6.9B;Vibration, Rigid Printed Wiring

IPC TM-650 2.6;Environmental Test Methods - Revision Y

IPC TM-650;TEST METHODS MANUAL

IPC TP-1090;Layman´s Guide to Qualifying New Fluxes for MIL-STD-2000A or MT-0002

IPC TP-1113 CD;Circuit Board Ionic Cleanliness Measurement: What Does It Tell Us? - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TP-1113;Circuit Board Ionic Cleanliness Measurement: What Does It Tell Us?

IPC TP-1114 CD;Laymans´s Guide to Qualifying a Process to J-STD-001B - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TP-1114;Laymans´s Guide to Qualifying a Process to J-STD-001B

IPC TP-1115;Selection and Implementation Strategy for a Low-Residue No-Clean Process

IPC TR-460A;Trouble Shooting Checklist for Wave Soldering of Printed Wiring Boards

IPC TR-461;Solderability Evaluation of Thick and Thin Fused Coatings

IPC TR-462;Solderability Evaluation of Printed Boards with Protective Coatings over a Long Term Storage

IPC TR-464 CD;Accelerated Aging for Solderability Evaluations - Incorporates Addendum: December 1987; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-464;Accelerated Aging for Solderability Evaluations - Incorporates Addendum: December 1987

IPC TR-465-1;Round Robin Test on Steam Ager Temperature Control Stability

IPC TR-465-2;Effect of Steam Aging Time and Temperature on Solderability Test Results

IPC TR-465-3 CD;Evaluation of Steam Aging on Alternative Finishes Round Robin Test Program Phase IIA - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-465-3;Evaluation of Steam Aging on Alternative Finishes Round Robin Test Program Phase IIA

IPC TR-466;Wetting Balance Standard Weight Comparison Test

IPC TR-467 CD;Supporting Data and Numerical Examples for ANSI J-STD-001B: Appendix D (Control of Fluxes) - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-467;Supporting Data and Numerical Examples for ANSI J-STD-001B: Appendix D (Control of Fluxes)

IPC TR-468;Factors Affecting Insulation Resistance Performance of Printed Boards

IPC TR-470;Thermal Characteristics of Multilayer Interconnection Boards

IPC TR-476A;Electrochemical Migration: Electrically Induced Failures in Printed Wiring Assemblies

IPC TR-481;Results of Multilayer Test Program Round Robin V

IPC TR-482;New Developments in Thin Copper Foils

IPC TR-483;Dimensional Stability Testing of Thin Laminates - Incorporates Addendum II: March 1991

IPC TR-484;Results of IPC Copper Foil Ductility Round Robin Study

IPC TR-485;Results of Copper Foil Rupture Strength Test Round Robin Study

IPC TR-486 CD;Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress Microsectioning Evaluations for Detecting the Presence of Inner-Layer Seperations - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-486;Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress Microsectioning Evaluations for Detecting the Presence of Inner-Layer Seperations

IPC TR-551;Quality Assessment of Printed Boards Used for Mounting and Interconnecting Electronic Components

IPC TR-578;Leading Edge Manufacturing Technology Report Results of a Round Robin Study on Minimum Conductor Width and Plated-Through Holes in Rigid, Bare Copper, Double Sided Printed Wiring Boards

IPC TR-579 CD;Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-579;Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

IPC TR-580;Cleaning and Cleanliness Test Program Phase 1 Test Results

IPC TR-581;IPC Phase 3 Controlled Atmosphere Soldering Study

IPC TR-582;Cleaning and Cleanliness Testing Program Test Results for: Phase 3 - Low Solids Fluxes and Pastes Processed in Ambient Air

IPC TR-583 CD;An In-Depth Look At Ionic Cleanliness Testing - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-583;An In-Depth Look At Ionic Cleanliness Testing

IPC TR-585 CD;Time, Temperature and Humidity Stress of Final Board Finish Solderability - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC TR-585;Time, Temperature and Humidity Stress of Final Board Finish Solderability

IPC WP TR-584A CD;IPC White Paper and Technical Report on the Use of Halogenated Flame Retardants in Printed Circuit Boards and Assemblies - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC WP TR-584A;IPC White Paper and Technical Report on the Use of Halogenated Flame Retardants in Printed Circuit Boards and Assemblies

IPC WP-008 CD;Setting Up Ion Chromatography Capability - To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

IPC WP-008;Setting Up Ion Chromatography Capability

IPC WP-009;A Summary of Tin Whisker Research References

ISA 100.11A;Wireless systems for industrial automation: Process control and related applications

ISA 107.1;Industry Standard File Format for Revolution-Based Tip Timing Data

ISA 12.00.01;Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements

ISA 12.00.02;Certificate Standard for AEx Equipment for Hazardous (Classified) Locations

ISA 12.01.01;Definitions and Information Pertaining to Electrical Equipment in Hazardous (Classified) Locations

ISA 12.02.01;Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety "i"

ISA 12.02.04;Fieldbus Intrinsically Safe Concept (FISCO) and Fieldbus Non-Incendive Concept (FNICO)

ISA 12.04.01;Electrical Apparatus for Explosive Gas Atmospheres – Part 2 Pressurized Enclosures "p"

ISA 12.04.04;Pressurized Enclosures

ISA 12.10.03;Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD"

ISA 12.10.06;Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD"

ISA 12.10;Area Classification in Hazardous (Classified) Dust Locations

ISA 12.12.01;Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations

ISA 12.12.02;Electrical Apparatus for Use in Class 1, Zone 2 Hazardous (Classified) Locations - Type of Protection "n"

ISA 12.12.03;Standard for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations

ISA 12.12;Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations

ISA 12.13.01;Performance Requirements for Combustible Gas Detectors

ISA 12.13.04;Performance Requirements for Open Path Combustible Gas Detectors - First Edition

ISA 12.16.01;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection – Increased Safety "e"

ISA 12.20.01;General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations

ISA 12.22.01;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Flameproof "d"

ISA 12.23.01;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Encapsulation "m"

ISA 12.25.01;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Powder Filling "q"

ISA 12.26.01;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Oil Immersion "o"

ISA 12.27.01;Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids

ISA 18.1;Annunciator Sequences and Specifications

ISA 18.2;Management of Alarm Systems for the Process Industries

ISA 20.00.03;Specification Forms for Process Measurement and Control Instruments Part 3: Form Requirements and Development Guidelines

ISA 20;Specification Forms for Process Measurement and Control Instruments, Primary Elements and Control Valves

ISA 26;Dynamic Response Testing of Process Control Instrumentation

ISA 37.1;Electrical Transducer Nomenclature and Terminology

ISA 37.10;Specifications and Tests for Piezoelectric Pressure and Sound Pressure Transducers

ISA 37.12;Specifications and Tests for Potentiometric Displacement Transducers

ISA 37.16.01;A Guide for the Dynamic Calibration of Pressure Transducers

ISA 37.3;Specifications and Tests for Strain Gage Pressure Transducers

ISA 37.5;Specifications and Tests for Strain Gage Linear Accelerator Transducers

ISA 37.6;Specifications and Tests for Potentiometric Pressure Transducers

ISA 37.8;Specifications and Tests for Strain Gage Force Transducers

ISA 5.06.01;Functional Requirements Documentation for Control Software Applications

ISA 5.1;Instrumentation Symbols and Identification

ISA 5.2;Binary Logic Diagrams for Process Operations

ISA 5.3;Graphic Symbols for Distributed Control Shared Display Instrumentation, Logic and Computer Systems

ISA 5.4;Instrument Loop Diagrams

ISA 5.5;Graphic Symbols for Process Displays

ISA 50.00.01;Compatibility of Analog Signals for Electronic Industrial Process Instruments

ISA 50.02 PART 2;Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition

ISA 50.02 PART 3;Fieldbus Standard for Use in Industrial Control Systems Part 3: Data Link Service Definition - Second Printing: January 1999

ISA 50.02 PART 4;Fieldbus Standard for Use in Industrial Control Systems Part 4: Data Link Protocol Specification - Second Printing: January 1999

ISA 50.02 PART 5;Fieldbus Standard for Use in Industrial Control Systems Part 5: Application Layer Service Definition

ISA 50.02 PART 6;Fieldbus Standard for Use in Industrial Control Systems Part 6: Application Layer Protocol Specifications

ISA 50.1;Compatibility of Analog Signals for Electronic Industrial Process Instruments

ISA 51.1;Process Instrumentation Terminology

ISA 60079-0;Explosive atmospheres – Part 0: Equipment – General Requirements - Sixth Edition; 12.00.01

ISA 60079-1;Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d” - Sixth Edition; 12.22.01

ISA 60079-10-2;Explosive Atmospheres – Part 10-2: Classification of areas - Combustible dust atmospheres - 12.10.05

ISA 60079-11;Explosive Atmospheres - Part 11: Equipment protection by intrinsic safety “i” - Edition 6.2; 12.02.01

ISA 60079-15;Explosive atmospheres – Part 15: Equipment protection by type of protection "n" - Edition 4; 12.12.02

ISA 60079-18;Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Encapsulation “m” - 12.23.01

ISA 60079-18;Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" - 12.23.01

ISA 60079-2;Explosive Atmospheres – Part 2: Equipment protection by pressurized enclosures “p” - 12.04.01

ISA 60079-25;Explosive Atmospheres - Part 25: Intrinsically safe electrical systems - 12.02.05

ISA 60079-26;Explosive atmospheres - Part 26: Equipment for Use in Class I, Zone 0 Hazardous (Classified) Locations - 12.00.03

ISA 60079-27;Fieldbus Intrinsically Safe Concept (FISCO) and Fieldbus Non-Incendive Concept (FNICO) - 12.02.04

ISA 60079-28;Explosive Atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation - Edition 1.1; 12.21.02

ISA 60079-29-1;Explosive Atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases - 12.13.01; Second Printing March 12, 2014

ISA 60079-29-2;Explosive Atmospheres – Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen - 12.13.02

ISA 60079-31;Explosive Atmospheres – Part 31: Equipment Dust Ignition Protection by Enclosure “t” - Edition 1.1; 12.10.03

ISA 60079-5;Explosive Atmospheres – Part 5: Equipment Protection by Powder Filling “q” - Third Edition; 12.00.04

ISA 60079-6;Explosive Atmospheres – Part 6: Equipment Protection by Oil Immersion “o” - Third Edition; 12.00.05

ISA 60079-7;Explosive Atmospheres - Part 7: Equipment protection by increased safety "e" - Fourth Edition; 12.16.01

ISA 61010-031;Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test - 82.02.02

ISA 61010-1;SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE – Part 1: General requirements - 82.02.01

ISA 61010-2-030;SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE – Part 2-030: Particular requirements for testing and measuring circuits - First Edition; 82.02.03

ISA 61241-0;Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − General Requirements - 12.10.02

ISA 61241-1;Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Enclosures “tD” - 12.10.03

ISA 61241-10;Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - 12.10.05

ISA 61241-11;Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Intrinsic Safety “iD” - 12.10.04

ISA 61241-18;Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Encapsulation “mD” - 12.10.07

ISA 61241-2;Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations − Protection by Pressurization “pD” - 12.10.06

ISA 61804-3;Function Blocks (FB) For Process Control - Part 2: Electronic Device Description Language (EDDL) - 104.00.01

ISA 62381;Automation Systems in the Process Industry – Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and Site Integration Test (SIT)

ISA 62382;Automation Systems in the Process Industry − Electrical and Instrumentation Loop Check

ISA 62443-1-1;Security for Industrial Automation and Control Systems Part 1: Terminology, Concepts, and Models - 99.01.01

ISA 62443-2-1;Security for Industrial Automation and Control Systems: Establishing an Industrial Automation and Control Systems Security Program - 99.02.01

ISA 62443-3-3;Security for industrial automation and control systems Part 3-3: System security requirements and security levels - 99.03.03

ISA 62453-1;Field device tool (FDT) interface specification – Part 1: Overview and guidance - 103.00.01

ISA 62453-2;Field device tool (FDT) interface specification – Part 2: Concepts and detailed description - 103.00.02

ISA 62453-301;Field device tool (FDT) interface specification – Part 301: Communication profile integration – IEC 61784 CPF 1 - 103.00.03

ISA 62453-302;Field device tool (FDT) interface specification – Part 302: Communication profile integration – IEC 61784 CPF 2 - 103.00.04

ISA 62453-303-1;Field device tool (FDT) interface specification – Part 303-1: Communication profile integration – IEC 61784 CP 3 1 and CP 3 2 - 103.00.05

ISA 62453-303-2;Field device tool (FDT) interface specification – Part 303-2: Communication profile integration – IEC 61784 CP 3 4, CP 3 5 and CP 3 6 - 103.00.06

ISA 62453-306;Field device tool (FDT) interface specification – Part 306: Communication profile integration – IEC 61784 CPF 6 - 103.00.07

ISA 62453-309;Field device tool (FDT) interface specification – Part 309: Communication profile integration – IEC 61784 CPF 9 - 103.00.08

ISA 62453-315;Field device tool (FDT) interface specification – Part 315: Communication profile integration – IEC 61784 CPF 15 - 103.00.09

ISA 67.01.01;Transducer and Transmitter Installation for Nuclear Safety Applications

ISA 67.01;Transducer and Transmitter Installation for Nuclear Safety Applications

ISA 67.02.01;Nuclear Safety-Related Instrument-Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants

ISA 67.03;Light Water Reactor Coolant Pressure Boundary Leak Detection

ISA 67.04.01;Setpoints for Nuclear Safety-Related Instrumentation

ISA 67.06.01;Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants

ISA 67.06;Response Time Testing of Nuclear Safety-Related Instrument Channels in Nuclear Power Plants

ISA 67.14.01;Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities

ISA 7.0.01;Quality Standard for Instrument Air

ISA 71.01;Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity

ISA 71.02;Environmental Conditions for Process Measurement and Control Systems: Power

ISA 71.03;Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences

ISA 71.04;Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants

ISA 72.01;PROWAY-LAN Industrial Data Highway

ISA 72.02;Manufacturing Message Specification: Companion Standard for Process Control

ISA 75.01.01;Industrial-Process Control Valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions

ISA 75.01;Flow Equations for Sizing Control Valves

ISA 75.02.01;Control Valve Capacity Test Procedures

ISA 75.02;Control Valve Capacity Test Procedures

ISA 75.03;Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (ANSI Classes 125, 150, 250, 300, and 600)

ISA 75.04;Face-to-Face Dimensions for Flangeless Control Valves (ANSI Classes 150, 300, and 600)

ISA 75.05.01;Control Valve Terminology

ISA 75.05;Control Valve Terminology

ISA 75.07;Laboratory Measurement of Aerodynamic Noise Generated by Control Valves

ISA 75.08.01;FAce-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600)

ISA 75.08.02;Face-to-Face Dimensions for Flanged and Flangeless Rotary Control Valves (Classes 150, 300, and 600)

ISA 75.08.03;Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)

ISA 75.08.04;Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500)

ISA 75.08.05;Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900, 1500, and 2500)

ISA 75.08.06;Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500)

ISA 75.08.07;Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600)

ISA 75.08.08;Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150, 300, and 600)

ISA 75.08.09;Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600)

ISA 75.08;Installed Face-To-Face Dimensions for Flanged Clamp or Pinch Valves

ISA 75.10.01;General Requirements for Clamp or Pinch Valves

ISA 75.10.02;Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)

ISA 75.11.01;Inherent Flow Characteristic and Rangeability of Control Valves

ISA 75.11;Inherent Flow Characteristic and Rangeability of Control Valves

ISA 75.12;Face-To-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)

ISA 75.13.01;Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output

ISA 75.13;Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output

ISA 75.14;Face-To-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Class 4500)

ISA 75.15;Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500)

ISA 75.16;Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (ANSI Classes 900, 1500, and 2500)

ISA 75.17;Control Valve Aerodynamic Noise Prediction

ISA 75.19.01;Hydrostatic Testing of Control Valves

ISA 75.19;Hydrostatic Testing of Control Valves

ISA 75.20;Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (ANSI Classes 150, 300, and 600)

ISA 75.22;Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150, 300, and 600)

ISA 75.25.01;Test Procedure for Control Valve Response Measurement from Step Inputs

ISA 75.26.01;Control Valve Diagnostic Data Acquisition and Reporting

ISA 76.00.02;Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals

ISA 77.13.01;Fossil Fuel Power Plant Steam Turbine Bypass System

ISA 77.14.01;Fossil Fuel Power Plant Steam Turbine Controls

ISA 77.20.01;Fossil Fuel Power Plant Simulators: Functional Requirements

ISA 77.20;Fossil Fuel Power Plant Simulators - Functional Requirements

ISA 77.41.01;Fossil Fuel Power Plant Boiler Combustion Controls

ISA 77.42.01;Fossil Fuel Power Plant Feedwater Control System - Drum Type

ISA 77.43.01;Fossil Fuel Power Plant Unit Plant Demand Development – Drum Type

ISA 77.43;Fossil Fuel Power Plant Unit Plant Demand Development Drum Type

ISA 77.44.01;Fossil Fuel Power Plant - Steam Temperature Controls

ISA 77.44.02;Fossil Fuel Power Plant Steam Temperature Control System Once-Through Type

ISA 77.44;Fossil Fuel Power Plant Steam Temperature Control System - Drum Type

ISA 77.70.02;Fossil Fuel Power Plant Instrument Piping Installation

ISA 77.70;Fossil Fuel Power Plant Instrument Piping Installation

ISA 77.82.01;Selective Catalytic Reduction (SCR) Control Systems

ISA 82.02.01;Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment - General Requirements

ISA 82.02.02;Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

ISA 82.02.04;Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use

ISA 82.03;Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment

ISA 84.00.01 P1;Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 1: Framework, Definitions, System, Hardware and Software Requirements

ISA 84.00.01 P2;Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI ISA-84.00.01-2004 Part 1 - Informative

ISA 84.00.01 P3;Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 3: Guidance for the Determination of the Required Safety Integrity Levels - Informative

ISA 84.01;Application of Safety Instrumented Systems for the Process Industries

ISA 84.91.01;Identification and Mechanical Integrity of Safety Controls, Alarms, and Interlocks in the Process Industry

ISA 88 BATCH STANDARDS CD;ISA-88 Batch Systems Standards CD - 3rd Edition; CD-Rom; To Purchase: Contact IHS at 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

ISA 88.00.01;Batch Control Part 1: Models and Terminology

ISA 88.00.02;Batch Control Part 2: Data Structures and Guidelines for Languages

ISA 88.00.03;Batch Control Part 3: General and Site Recipe Models and Representation

ISA 88.00.04;Batch Control Part 4: Batch Production Records

ISA 88.01;Batch Control Part 1: Models and Terminology

ISA 91.00.01;Identification of Emergency Shutdown Systems and Controls That are Critical to Maintaining Safety in Process Industries

ISA 92.0.01 PART I;Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide

ISA 92.00.01;Performance Requirements for Toxic Gas Detectors

ISA 92.00.02;Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments

ISA 92.02.01 PART I;Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

ISA 92.03.01;Performance Requirements for Ammonia Detection Instruments (25-500 ppm)

ISA 92.04.01 PART I;Performance Requirements for Instruments Used to Detect Oxygen-Deficient  Oxygen-Enriched Atmospheres

ISA 92.06.01;Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale)

ISA 93.00.01;Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves

ISA 95.00.01;Enterprise-Control System Integration − Part 1: Models and Terminology

ISA 95.00.02;Enterprise-Control System Integration − Part 2: Object Model Attributes

ISA 95.00.03;Enterprise-Control System Integration − Part 3: Activity Models of Manufacturing Operations Management

ISA 95.00.04;Enterprise-Control System Integration − Part 4: Objects and attributes for manufacturing operations management integration

ISA 95.00.05;Enterprise-Control System Integration − Part 5: Business-to-Manufacturing Transactions

ISA 96.02.01;Guidelines for the Specification of Electric Valve Actuators

ISA 96.03.01;Guidelines for the Specification of Heavy Duty Pneumatically Powered Quarter Turn Valve Actuators

ISA 96.03.03;Guidelines for the Specification of Pneumatic Vane Type Valve Actuators

ISA 98.00.01;Qualifications and Certification of Control System Technicians

ISA A GUD AUTOMTN BDY KNWLDG;A Guide to the Automation Body of Knowledge - Second Edition

ISA ADV CNTRL UNLEA PLA PER MAN BEN;Advanced Control Unleashed - Plant Performance Management for Optimum Benefit

ISA ADV PH MEAS CNTRL;Advanced pH Measurement and Control - Third Edition

ISA ADV PID CNTRL;Advanced PID Control

ISA ADV TEMP MEAS CNTRL;Advanced Temperature Measurement and Control - Second Edition

ISA ALRM MGT;Alarm Management: A Comprehensive Guide - Second Edition

ISA APPLYING S88 USER;Applying S88: Batch Control from a User's Perspective

ISA AUTO CNTL SYS ECO;Automation and Control Systems Economics - 2nd Edition

ISA AUTOMTN APPL BIO-PHARM;Automation Applications in Bio-Pharmaceuticals

ISA AUTOMTN MADE EASY;Automation Made Easy: Everything You Wanted to Know about Automation and Need to Ask

ISA AUTOMTN SYS INST DICT;Automation, Systems, and Instrumentation Dictionary - Fourth Edition

ISA BAS MATH PRO CNTRL;Basic Math for Process Control

ISA BASIC ADV REG CNTRL;Basic and Advanced Regulatory Control - System Design and Application - Second Edition

ISA BASIC ELEC CNTRL;Basic Electricity and Electronics for Control - Fundamentals and Applications - Third Edition

ISA BATCH CNTRL SYS;Batch Control Systems - Design, Application, and Implementation - Second Edition

ISA BOILR CNTRL SYS;Boiler Control Systems Engineering - Second Edition

ISA BTM-LINE AUTOMTN;Bottom-Line Automation - Second Edition

ISA C100.6-3;Voltage or Current Reference Devices: Solid-State Devices

ISA CLS-LOOP PROD LIFE CYC MGT;Closed-Loop Product Life Cycle Management - Using Smart Embedded Systems

ISA CNTRL BOILR;The Control of Boilers - Second Edition

ISA CNTRL LOOP FONDTN;Control Loop Foundation: Batch and Continuous Processes

ISA COLLAB PROC AUTOMTN SYS;Collaborative Process Automation Systems

ISA CONDSD HDBK MEAS CNTRL;The Condensed Handbook of Measurement and Control - Third Edition

ISA DES PATT FLEX MAN;Design Patterns for Flexible Manufacturing

ISA DIRECT;Directory of Instrumentation, 1992

ISA ELEC INSTR HAZ LOCAT;ELECTRICAL INSTRUMENTS IN HAZARDOUS LOCATIONS - Fourth Edition

ISA FONDTN FLDBUS;Foundation Fieldbus - Fourth Edition

ISA FUNCT BLK EMB DIST CNTRL SYS DES;IEC 61499 FUNCTION BLOCKS FOR EMBEDDED AND DISTRIBUTED CONTROL SYSTEMS DESIGN - Second Edition

ISA FUND IND CNTRL;Fundamentals of Industrial Control - Second Edition

ISA FUND PROC CNTRL;Fundamentals of Process Control Theory - Third Edition

ISA FUND TST MEAS INSTA;Fundamentals of Test Measurement Instrumentation

ISA FUTURE ENER;Future Energy: Opportunities and Challenges

ISA GOOD TUNING;Good Tuning: A Pocket Guide - Third Edition; To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

ISA HDBK MEASRMNT EQ TABL;ISA Handbook of Measurement Equations and Tables - Second Edition

ISA HMN-MACH INTRFCE DES PROC CNTRL APP;Human-Machine Interface Design for Process Control Applications

ISA HTCHKR GUD MAN OPS MGT;The Hitchhiker’s Guide to Operations Management: ISA-95 Best Practices Book 1.0

ISA IND DATA COMM;Industrial Data Communications - Fourth Edition

ISA IND ETHRNT PLNT FLR;INDUSTRIAL ETHERNET ON THE PLANT FLOOR A PLANNING AND INSTALLATION GUIDE

ISA IND ETHRNT;Industrial Ethernet - How to Plan, Install, and Maintain TCP IP Ethernet Networks: The Basic Reference Guide for Automation and Process Control Engineers - Second Edition

ISA IND FLW MEASRMNT;Industrial Flow Measurement - Third Edition

ISA IND PRESS LVL DENS MEASRMNT;Industrial Pressure, Level, and Density Measurement - Second Edition

ISA INSTR CNTRL SYS DOCMNT;Instrumentation and Control Systems Documentation - Second Edition

ISA LOOP CHK;Loop Checking - A Technician's Guide

ISA MAIN INSTR SYS;Maintenance of Instruments and Systems - Second Edition

ISA MC96.1;Temperature Measurement Thermocouples

ISA MEASRMNT CNTRL BASC;Measurement and Control Basics - Fourth Edition

ISA MEASRMNT UNCERTN;Measurement Uncertainty - Methods and Applications - Fourth Edition

ISA MES GUD EXEC;MES Guide for Executives - Why and How to Select, Implement, and Maintain a Manufacturing Execution System

ISA MOD UNLEASH;Models Unleashed: Virtual Plant and Model Predictive Control Applications, A Pocket Guide

ISA MOTOR DRV;Motors and Drives - A Practical Technology Guide

ISA NEW DIR BIOPROC MDL CNTRL;New Directions in Bioprocess Modeling and Control - Maximizing Process Analytical Technology Benefits

ISA PAT TRDMRK COPYRGHT TRD SECRT;PATENTS, TRADEMARKS, COPYRIGHTS, and TRADE SECRETS What Automation Professionals, Manufacturers, and Business Owners Need to Know

ISA PID CNTRLRS;PID Controllers - Theory, Design, and Tuning - Second Edition

ISA PRAC PROJ MGT;Practical Project Management: Learning to Manage the Professional - Second Edition

ISA PRAC THERMO;Practical Thermocouple Thermometry - Second Edition

ISA PROGMBLE CNTRLRS;Programmable Controller - Fourth Edition

ISA REAL-TIME EXECUT;Real-Time Execution for IEC 61499

ISA RP12.06.01;Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety

ISA RP12.13 PT II;Installation, Operation, and Maintenance of Combustible Gas Detection Instruments

ISA RP12.13.02;Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments

ISA RP12.15 PT II;Installation, Operation, and Maintenance of Hydrogen Sulfide Detection Instruments

ISA RP12.2.02;Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings

ISA RP12.4;Pressurized Enclosures

ISA RP12.6;Wiring Practices for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety - Second Printing: September 1999

ISA RP16.1,2,3;Terminology, Dimensions and Safety Practices for Indicating Variable Area Meters (Rotameters) RP16.1 Glass Tube; RP16.2 Metal Tube; RP16.3 Extension Type Glass Tube

ISA RP16.4;Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)

ISA RP16.5;Installation, Operation, Maintenance Instructions for Glass Tube Variable Area Meters (Rotameters)

ISA RP16.6;Methods and Equipment for Calibration of Variable Area Meters (Rotameters)

ISA RP2.1;Manometer Tables

ISA RP3.1;FLowmeter Installations Seal and Condensate Chambers

ISA RP3.2;FLANGE MOUNTED SHARP EDGED ORIFICE PLATES FOR FLOW MEASUREMENT

ISA RP31.1;Specification, Installation, and Calibration of Turbine Flowmeters

ISA RP37.2;Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing

ISA RP42.00.01;Nomenclature for Instrument Tube Fittings

ISA RP42.1;Nomenclature for Instrument Tube Fittings

ISA RP52.1;Recommended Environments for Standards Laboratories

ISA RP55.1;Hardware Testing of Digital Process Computers

ISA RP60.1;Control Center Facilities

ISA RP60.11;Crating, Shipping and Handling for Control Centers

ISA RP60.2;Control Center Design Guide and Terminology

ISA RP60.3;Human Engineering for Control Centers

ISA RP60.4;Documentation for Control Centers

ISA RP60.6;Nameplates, Labels and Tags for Control Centers

ISA RP60.8;Electrical Guide for Control Centers

ISA RP60.9;Piping Guide for Control Centers

ISA RP67.04.02;Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation

ISA RP7.1;Pneumatic Control Circuit Pressure Test

ISA RP7.7;Producing Quality Instrument Air

ISA RP74.01;Application and Installation of Continuous-Belt Weighbridge Scales

ISA RP75.06;Control Valve Manifold Designs, Recommended Practice

ISA RP75.18;Control Valve Position Stability

ISA RP75.21;Process Data Presentation for Control Valves

ISA RP75.23;Considerations for Evaluating Control Valve Cavitation

ISA RP76.0.01;Analyzer System Inspection and Acceptance

ISA RP77.60.02;Fossil Fuel Power Plant Human-Machine Interface: Hard Panel Alarms

ISA RP77.60.05;Fossil Fuel Power Plant Human-Machine Interface Task Analysis

ISA RP92.0.02 PART II;Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments: Hydrogen Sulfide

ISA RP92.02.02 PART II;Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale)

ISA RP92.03.02;Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppm Full Scale)

ISA RP92.04.02 PART II;Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient Oxygen-Enriched Atmospheres

ISA RP92.06.02;Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppm Full Scale)

ISA S12.1;Definitions and Information Pertaining to Electrical Instruments in Hazardous (Classified) Locations

ISA S12.11;Electrical Instruments in Hazardous Dust Locations

ISA S12.15 PT I;Performance Requirements for Hydrogen Sulfide Detection Instruments (10-100 ppm)

ISA S12.4;Instrument Purging for Reduction of Hazardous Area Classification

ISA S39.1;Control Valve Sizing Equations for Incompressible Fluids

ISA S50.02;Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition

ISA S61.1;Industrial Computer System FORTRAN Procedures for Executive Functions, Process Input Output, and Bit Manipulation

ISA S61.2;Industrial Computer System FORTRAN Procedures for File Access and the Control of File Contention

ISA S67.02;Nuclear-Safety-Related Instrument Sensing Line Piping and Tubing Standards for Use in Nuclear Power Plants

ISA S67.04;Setpoints for Nuclear Safety-Related Instrumentation - Second Printing

ISA S67.10;Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants

ISA S67.14;Qualifications and Certification of Instrumentation and Control Technician in Nuclear Facilities

ISA S7.3;Quality Standard for Instrument Air

ISA S7.4;Air Pressures for Pneumatic Controllers, Transmitters, and Transmission Systems

ISA S77.41;Fossil Fuel Power Plant Boiler Combustion Controls

ISA S77.42;Fossil Fuel Plant Feedwater Control System - Drum Type

ISA SAF INST SYS VERF;Safety Instrumented Systems Verification - Practical Probabilistic Calculations

ISA SAF INST SYS;Safety Instrumented Systems - Design, Analysis, and Justification - Second Edition

ISA SAF INT LEV SEL;Safety Integrity Level Selection - Systematic Methods Including Layer of Protection Analysis

ISA SAFETY INSTRUMENTED;Safety Instrumented Systems Verification – Practical Probabilistic Calculations - To Purchase: Contact IHS at 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

ISA SELL MORE THR EFFE TECH PRESENT;Sell More Through Effective Technical Presentations - Second Edition

ISA SENS PERF RELI;Sensor Performance and Reliability

ISA SENS SELEC GUD;Sensor Selection Guide: Optimizing Manufacturing and Processes - Second Edition

ISA SOFTWRE AUTO;Software for Automation: Architecture, Integration, and Security

ISA START-UP - A TECH GUD;Start-up - A Technician's Guide - Second Edition

ISA SUCCESS INST CNTRL SYS DES;Successful Instrumentation and Control Systems Design - Second Edition

ISA TR100.00.01;The Automation Engineer’s Guide to Wireless Technology Part 1 – The Physics of Radio, a Tutorial

ISA TR100.00.02;The Automation Engineer’s Guide to Wireless Technology: Part 2 – A Review of Technologies for Industrial Asset Tracking

ISA TR100.00.03;Wireless User Requirements for Factory Automation

ISA TR100.14.01 PART 1;Trustworthiness in Wireless Industrial Automation: Part I – Information for End Users and Regulators

ISA TR100.15.01;Backhaul Architecture Model: Secured Connectivity over Untrusted or Trusted Networks

ISA TR104.00.03;EDDL: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices

ISA TR106.00.01;Procedure Automation for Continuous Process Operations – Models and Terminology

ISA TR12.06.01;Electrical Equipment in a Class I, Division 2 Zone 2 Hazardous Location

ISA TR12.12.04;Electrical Equipment in a Class I, Division 2 Zone 2 Hazardous Location

ISA TR12.13.01;Flammability Characteristics of Combustible Gases and Vapors

ISA TR12.13.02;Investigation of Fire and Explosion Accidents in the Fuel-Related Industries – A Manual by Kuchta

ISA TR12.13.03;Guide for Combustible Gas Detection as a Method of Protection

ISA TR12.2;Intrinsically Safe System Assessment Using the Entity Concept

ISA TR12.21.01;Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations

ISA TR12.24.01;Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2

ISA TR18.2.4;Enhanced and Advanced Alarm Methods

ISA TR18.2.5;Alarm System Monitoring, Assessment, and Auditing

ISA TR18.2.6;Alarm Systems for Batch and Discrete Processes

ISA TR20.00.01 W FORMS;Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations - Also Includes ISA 20.00.03-2007: Includes Access the to Additional Content of a separate directory for each form and its accompanying Pick List.

ISA TR20.00.01;Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations - Also Includes ISA 20.00.03-2001

ISA TR5.1.01 TR77.40.01;Functional Diagram Usage

ISA TR50.02, PART 9;Fieldbus Standard for Use in Industrial Control Systems: User Layer Technical Report

ISA TR50.02, PARTS 3&4;Fieldbus Standard for Use in Industrial Control Systems, Parts 3 & 4: Technical Report for Fieldbus Data Link Layer - Tutorial

ISA TR52.00.01;Recommended Environments for Standards Laboratories

ISA TR61804-4;Function Blocks (FB) for Process Control - Part 4: EDD Interoperability Guideline - 104.00.02

ISA TR67.04.08;Setpoints for Sequenced Actions

ISA TR67.04.09;Graded Approaches To Setpoint Determination

ISA TR75.04.01;Control Valve Position Stability

ISA TR75.25.02;Control Valve Response Measurement from Step Inputs

ISA TR77.42.02;Fossil Fuel Power Plant Compensated Differential Pressure Based Drum Level Measurement

ISA TR77.60.04;Fossil Fuel Power Plant Human-Machine Interface - Electronic Screen Displays

ISA TR77.70.01;Tracking and Reporting of Instrument and Control Data

ISA TR77.81.05;Standard Software Interfaces for CEMS Relative Accuracy Test Audit Data

ISA TR84.00.02 PART 1;Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction

ISA TR84.00.02 PART 2;Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations

ISA TR84.00.02 PART 3;Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis

ISA TR84.00.02 PART 4;Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis

ISA TR84.00.02 PART 5;Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis

ISA TR84.00.02 SET;Parts 1-5, Safety Instrumented Functions (SIF) Safety Integrity Level (SIL) Evaluation Techniques Package - To Purchase: Contact IHS at 1-800-854-7179 USA Canada or 303-397-7956 Worldwide

ISA TR84.00.03;Mechanical Integrity of Safety Instrumented Systems (SIS)

ISA TR84.00.04 PART 1;Guidelines for the Implementation of ANSI ISA-84.00.01-2004

ISA TR84.00.04 PART 2;Example Implementation of ANSI ISA-84.00.01-2004

ISA TR84.00.05;Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS)

ISA TR84.00.06;Safety Fieldbus Design Considerations for Process Industry Sector Applications

ISA TR84.00.07;Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness

ISA TR84.00.09;Security Countermeasures Related to Safety Instrumented Systems (SIS)

ISA TR88.0.03;Possible Recipe Procedure Presentation Formats

ISA TR88.00.02;Machine and Unit States: An Implementation Example of ISA-88

ISA TR88.95.01;Using ISA-88 and ISA-95 Together

ISA TR91.00.02;Criticality Classification Guideline for Instrumentation

ISA TR92.06.03;Feasibility of Chlorine Detection Instrument Testing

ISA TR96.05.01;Partial Stroke Testing of Automated Block Valves

ISA TR98.00.02;Skill Standards for Control System Technicians

ISA TR99.00.01;Security Technologies for Manufacturing and Control Systems

ISA TR99.00.02;Integrating Electronic Security into the Manufacturing and Control Systems Environment

ISA TRBLSHT - A TECH GUD;Troubleshooting - A Technician's Guide - Second Edition

ISA TUNIG IND CNTRL SYS;Tuning of Industrial Control Systems - Second Edition

ISA WIRL NTWRK IND AUTO;Wireless Networks for Industrial Automation - Third Edition