ورود به سایت
ثبت نام
بازدیدها: 7025
جزئیات آرشیو کامل AWS
|
قیمت (تومان) |
سایز GB |
تعداد |
ویرایش |
موضوع |
نام استاندارد |
|
600,000 |
1.3 |
323 |
فول آپدیت از 1925 تا سال 2014 |
انجمن مهندسي جوش آمريكا |
AWS 2014 |
تلفن تماس: 49720000 (سی خط) فاکس: 49720200 (از ساعت 8:45 الی 16:30)
همراه: 09121554226 (از ساعت 10 الی 22) تلقن های آنالوگ: 44159850 و 44158017 و 44163957
از این آدرس ایمیل در مقابل روبوت های اسپمر محافظت می شود. جهت مشاهده آن باید جاوااسکریپت فعال باشد.
لیست کامل استانداردهای AWS
| Metric Practice Guide for the Welding Industry | 2001.01.01 | AWS A1.1 |
| Specification for Calibration and Performance Testing of Secondary Current Sensing Coils and Weld Current Monitors used in Single-Phase AC Resistance Welding - 1st Edition | 2007.03.05 | AWS A10.1M |
| A2.1:2007-WC & | 2012.01.01 | AWS A2.1-WCXL |
| Standard Symbols for Welding, Brazing, and Nondestructive Examination - 7th Edition | 2012.01.01 | AWS A2.4 |
| Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying - 12th Edition | 2010.01.01 | AWS A3.0M/A3.0 |
| Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal | 2006.01.01 | AWS A4.2M |
| Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding | 1993.01.01 | AWS A4.3 |
| Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings | 2001.01.01 | AWS A4.4M |
| Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld - 1st Edition | 2012.01.01 | AWS A4.5M/A4.5 |
| Procurement Guidelines for Consumables-Welding and Allied Processes-Flux and Gas Shielded Electrical Welding Processes - Fourth Edition | 2008.01.01 | AWS A5.01M/A5.01 |
| Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes - First Edition | 2007.01.01 | AWS A5.02/A5.02M |
| Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding - 14th Edition | 2012.01.01 | AWS A5.1/A5.1M |
| Welding Consumables - Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys - Classification - 10th Edition | 2012.01.01 | AWS A5.10/A5.10M |
| Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding - 10th Edition | 2010.01.01 | AWS A5.11/A5.11M |
| Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting - Seventh Edition | 2009.01.01 | AWS A5.12M/A5.12 |
| Specification for Surfacing Electrodes for Shielded Metal Arc Welding - 5th Edition | 2010.01.01 | AWS A5.13/A5.13M |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods - Tenth Edition | 2011.01.01 | AWS A5.14/A5.14M |
| Specification for Welding Electrodes and Rods for Cast Iron | 1990.01.01 | AWS A5.15 |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods - 6th Edition | 2013.01.01 | AWS A5.16/A5.16M |
| Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding | 1997.01.01 | AWS A5.17/A5.17M |
| Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding | 2005.01.01 | AWS A5.18/A5.18M |
| Specification for Magnesium Alloy Welding Electrodes and Rods | 1992.01.01 | AWS A5.19 |
| Specification for Carbon and Low- Alloy Steel Rods for Oxyfuel Gas Welding | 2007.01.01 | AWS A5.2/A5.2M |
| Specification for Bare Electrodes and Rods for Surfacing - 5th Edition | 2011.01.01 | AWS A5.21/A5.21M |
| Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods - 5th Edition | 2012.01.01 | AWS A5.22/A5.22M |
| Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding - Sixth Edition | 2011.01.01 | AWS A5.23/A5.23M |
| Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods | 2005.01.01 | AWS A5.24/A5.24M |
| Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding | 1997.01.01 | AWS A5.25/A5.25M |
| Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding | 1997.01.01 | AWS A5.26/A5.26M |
| Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding - Third Edition | 2005.01.01 | AWS A5.28/A5.28M |
| Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding - Fourth Edition | 2010.01.01 | AWS A5.29/A5.29M |
| Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding | 1999.01.01 | AWS A5.3/A5.3M |
| Specification for Consumable Inserts - 3rd Edition | 2007.01.01 | AWS A5.30/A5.30M |
| Specification for Fluxes for Brazing and Braze Welding - 2nd Edition | 2012.01.01 | AWS A5.31M/A5.31 |
| Welding Consumables-Gases and Gas Mixtures for Fusion Welding and Allied Processes - 2nd Edition | 2011.01.01 | AWS A5.32M/A5.32 |
| Specification for Nickel-Alloy Electrodes for Flux Cored ArcWelding - 1st Edition | 2007.01.01 | AWS A5.34/A5.34M |
| Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding - 1st Edition | 2012.01.01 | AWS A5.36/A5.36M |
| Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding - 11th Edition | 2012.01.01 | AWS A5.4/A5.4M |
| Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding | 2006.01.01 | AWS A5.5/A5.5M |
| Specification for Copper and Copper-Alloy Electrodes for Shielded Metal ArcWelding - 9th Edition | 2008.01.01 | AWS A5.6/A5.6M |
| Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes - 7th Edition | 2007.01.01 | AWS A5.7/A5.7M |
| Specification for Filler Metals for Brazing and Braze Welding - 10th Edition | 2011.01.01 | AWS A5.8M/A5.8 |
| Specification for Filler Metals for Brazing and Braze Welding - 10th Edition | 2012.01.01 | AWS A5.8M/A5.8-AMD 1 |
| Specification for Bare Stainless Steel Welding Electrodes and Rods - 8th Edition | 2012.01.01 | AWS A5.9/A5.9M |
| Guide for Verification and Validation in Computation Weld Mechanics - 1st Edition | 2013.01.01 | AWS A9.5 |
| Study Guide for API Standard 1104 Welding of Pipelines and Related Facilities - TWENTIETH EDITION | 2008.01.01 | AWS API-M |
| Arc Welding and Cutting Noise | 1979.01.01 | AWS AWN |
| Contents | 1979.01.01 | AWS AWS FUMES AND GASES |
| HANDBOOK OF PLASTICS JOINING | 2008.01.01 | AWS AWS HPJ |
| Guide for the Nondestructive Examination of Welds - 4th Edition | 2009.01.01 | AWS B1.10M/B1.10 |
| Guide for the Visual Examination of Welds | 2000.01.01 | AWS B1.11 |
| Specification for Welding Procedure and Performance Qualification - Fifth Edition | 2009.01.01 | AWS B2.1/B2.1M |
| Base Metal Grouping for Welding Procedure and Performance Qualification - Second Edition | 2009.01.01 | AWS B2.1/B2.1M-BMG |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8, P-8 or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1/8-006 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1, S-1 to M-8, P-8, or S-8), 18 Through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1/8-010 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8/P-8/S-8, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1/8-014 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER309(L), As-Welded Condition, Primarily Pipe Applications Site License - with Amendment 1: 2010 | 2002.01.01 | AWS B2.1-1/8-227 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License | 2002.01.01 | AWS B2.1-1/8-228 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/ S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER309(L) and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe Applications Site License - Incorporates Errata: 5/2006 | 2002.01.01 | AWS B2.1-1/8-229 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applications Site License - Incorporates Amendment 1 | 2002.01.01 | AWS B2.1-1/8-230 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1,Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8,Group 1),1/8 through 1-1/2 inch Thick, IN309, ER309, and E309-15, -16, or -17,or IN309, ER309(L), and ER309(L)-15, -16, or -17, As-Welded Condition, Primarily Pipe | 2002.01.01 | AWS B2.1-1/8-231 |
| Standard Welding Procedure Specification (WPS) for Site License Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the As-Welded Condition, With Backing | 1990.01.01 | AWS B2.1-1-001 |
| Standard Welding Procedure Specification (WPS) for Site License Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing | 1990.01.01 | AWS B2.1-1-002 |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding of Galvanized Steel, (M-1), 18 Through 10 Gauage, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1-003 |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Carbon Steel (M-1, Group 1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1-004 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1-007 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, P-1, or S-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1-008 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License - Incorporates Errata: 01/2005 | 2002.01.01 | AWS B2.1-1-011 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-1-012 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-016 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-017 |
| Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition Site License | 1994.01.01 | AWS B2.1-1-018 |
| Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition Site License | 1994.01.01 | AWS B2.1-1-019 |
| Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-020 |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-021 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-022 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition Site License | 1994.01.01 | AWS B2.1-1-026 |
| Standard Welding Procedure Specification (SWPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1 or P-1, Groups 1 and 2), 1/8 through 1/2 inch Thick, E71T-11, As-Welded Condition, Primarily Plate and Structural Applications Site License - Third Edition | 2011.01.01 | AWS B2.1-1-027 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License | 1996.01.01 | AWS B2.1-1-201 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License | 1996.01.01 | AWS B2.1-1-202 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily Pipe Applications) Site License | 1996.01.01 | AWS B2.1-1-203 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications Site License | 1996.01.01 | AWS B2.1-1-204 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications Site License | 1996.01.01 | AWS B2.1-1-205 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications | 1996.01.01 | AWS B2.1-1-206 |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe Applications) Site License | 1996.01.01 | AWS B2.1-1-207 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) | 1996.01.01 | AWS B2.1-1-208 |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition (Primarily Pipe Applications) Site License | 1996.01.01 | AWS B2.1-1-209 |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications Site License | 2001.01.01 | AWS B2.1-1-210 |
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Insert Root Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications | 2001.01.01 | AWS B2.1-1-211 |
| Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3 and E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Application | 2006.01.01 | AWS B2.1-1-232 |
| Standard Welding Procedure Specification (SWPS) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuiting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, As-Welded or PWHT Condition, Primarily Pipe Applications | 2006.01.01 | AWS B2.1-1-233 |
| Standard Welding Procedure Specification (SWPS) for Argon plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, E7XT-X, As-Welded or PWHT Condition, Primarily Pipe Applications | 2006.01.01 | AWS B2.1-1-234 |
| Standard Welding Procedure Specification (SWPS) for Argon plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70S-3, Flat Position Only, As-Welded or PWHT Condition, Primarily Pipe Applications | 2006.01.01 | AWS B2.1-1-235 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Aluminum (M/P-22 to M/P-22), 18 through 10 Gauge, ER4043 or R4043, in the As-Welded Condition, with or without Backing Site License - 3rd Edition | 2011.01.01 | AWS B2.1-22-015 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-4-217 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-4-218 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-4-219 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-4-220 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-4-221 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-5A-222 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-5A-223 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-5A-224 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-5A-225 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition | 1999.01.01 | AWS B2.1-5A-226 |
| Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-8-005 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-8-009 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/ P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing Site License | 2002.01.01 | AWS B2.1-8-013 |
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition Site License | 1994.01.01 | AWS B2.1-8-023 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER3XX, As-Welded Condition, Primarily Plate and Structural Applications - 3rd Edition | 2001.01.01 | AWS B2.1-8-024 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER3XX and E3XX-XX, As-Welded Condition, Primarily Plate and Structural Applications - 3rd Edition | 2001.01.01 | AWS B2.1-8-025 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications - Third Edition | 2001.01.01 | AWS B2.1-8-212 |
| Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 1st Edition | 1997.01.01 | AWS B2.1-8-213 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, ER3XX and E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition | 2001.01.01 | AWS B2.1-8-214 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition | 2001.01.01 | AWS B2.1-8-215 |
| Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX, ER3XX, and E3XX-XX, As-Welded Condition, Primarily Pipe Applications - 3rd Edition | 2001.01.01 | AWS B2.1-8-216 |
| Specification for Brazing Procedure and Performance Qualification - 3rd Edition | 2010.01.01 | AWS B2.2/B2.2M |
| Specification for Soldering Procedure and Performance Qualification - 2nd Edition | 2012.01.01 | AWS B2.3/B2.3M |
| Specification for Welding Procedure and Performance Qualification for Thermoplastics - 2nd Edition | 2012.01.01 | AWS B2.4 |
| Standard Methods for Mechanical Testing of Welds - 7th Edition | 2007.01.01 | AWS B4.0 |
| Standard Methods for Mechanical Testing ofWelds - 1st Edition | 2000.01.01 | AWS B4.0M |
| Specification for the Qualification of Welding Inspectors - 2nd Edition | 2013.01.01 | AWS B5.1 |
| Specification for the Qualification of Welding Sales Representatives - 2nd Edition | 2009.01.01 | AWS B5.14 |
| Specification for the Qualification of Radiographic Interpreters - Second Edition | 2010.01.01 | AWS B5.15 |
| Specification for the Qualification of Welding Engineers | 2006.01.01 | AWS B5.16 |
| Specification for the Qualification of Welding Fabricators - Third Edition | 2008.01.01 | AWS B5.17 |
| Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants | 2001.01.01 | AWS B5.2 |
| Specification for the Qualification of Welder Test Facilities | 2005.03.11 | AWS B5.4 |
| Specification for the Qualification of Welding Educators - 2nd Edition | 2011.01.01 | AWS B5.5 |
| Specification for the Qualification of Welding Supervisors | 2006.01.01 | AWS B5.9 |
| Brazing Footprints | 2003.01.01 | AWS BFP |
| Brazing Handbook - Fifth Edition | 2007.01.01 | AWS BRH |
| Recommended Practices for Resistance Welding - 5th Edition | 2012.01.01 | AWS C1.1M/C1.1 |
| Specification for Resistance Welding of Carbon and Low-Alloy Steels - Second Edition | 2009.01.01 | AWS C1.4M/C1.4 |
| Specification for the Qualification of Resistance Welding Technicians - Second Edition | 2009.01.01 | AWS C1.5 |
| Guide for Thermal-Spray Operator Qualification | 2002.01.01 | AWS C2.16/C2.16M |
| Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites - Incorporating Errata 1993 | 1993.01.01 | AWS C2.18 |
| Specificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete | 2002.01.01 | AWS C2.20/C2.20M |
| Specification for Thermal Spray Equipment Acceptance Inspection | 2003.01.01 | AWS C2.21M/C2.21 |
| Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel | 2003.01.01 | AWS C2.23M/C2.23 |
| Specification for Thermal Spray Feedstock - Wire and Rods - 2nd Edition | 2012.09.05 | AWS C2.25/C2.25M |
| Specification for Torch Soldering - First Edition | 2011.01.01 | AWS C3.11M/C3.11 |
| Standard Method for Evaluating the Strength of Brazed Joints - Fourth Edition | 2008.01.01 | AWS C3.2M/C3.2 |
| Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components - Third Edition | 2008.01.01 | AWS C3.3 |
| Specification for Torch Brazing - second edition | 2007.01.01 | AWS C3.4M/C3.4 |
| Specification for Induction Brazing - 2nd Edition | 2007.01.01 | AWS C3.5M/C3.5 |
| Specification for Furnace Brazing - Third Edition | 2008.01.01 | AWS C3.6M/C3.6 |
| Specification for Aluminum Brazing - 4th Edition | 2011.01.01 | AWS C3.7M/C3.7 |
| SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS - 3rd Edition | 2011.01.01 | AWS C3.8M/C3.8 |
| Specification for Resistance Brazing - First Edition | 2009.01.01 | AWS C3.9M/C3.9 |
| Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation - Second Edition | 2009.01.01 | AWS C4.2/C4.2M |
| Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation - Third Edition | 2007.01.01 | AWS C4.3/C4.3M |
| Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches - Second Edition | 2007.01.01 | AWS C4.4/C4.4M |
| Uniform Designation System for Oxyfuel Nozzles - 3rd Edition | 2012.01.01 | AWS C4.5M |
| Thermal Cutting Classification of Thermal Cuts Geometric Product Specification and Quality Tolerances - 1st Edition | 2006.01.01 | AWS C4.6M |
| Recommended Practices for Plasma-Arc Welding | 1973.01.01 | AWS C5.1 |
| Recommended Practices for Shielding Gases for Welding and Cutting | 2003.01.01 | AWS C5.10/C5.10M |
| Recommended Practices for Plasma Arc Cutting and Gouging | 2001.01.01 | AWS C5.2 |
| Recommended Practices for Air Carbon Arc Gouging and Cutting | 2000.01.01 | AWS C5.3 |
| Recommended Practices for Stud Welding - 2nd Printing | 1993.01.01 | AWS C5.4 |
| Recommended Practices for Gas Tungsten Arc Welding | 2003.01.01 | AWS C5.5/C5.5M |
| Recommended Practices for Gas Metal Arc Welding | 1989.01.01 | AWS C5.6 |
| Recommended Practices for Electrogas Welding | 2000.01.01 | AWS C5.7 |
| Recommended Practices for Friction Welding - First Edition | 1989.01.01 | AWS C6.1 |
| Specification for Friction Welding of Metals | 2006.01.01 | AWS C6.2/C6.2M |
| Recommended Practices for Electron Beam Welding | 2004.01.01 | AWS C7.1M/C7.1 |
| Recommended Practices for Laser Beam Welding, Cutting, and Allied Processes - 2nd Edition | 2010.01.01 | AWS C7.2M |
| Process Specification for Electron Beam Welding | 1999.01.01 | AWS C7.3 |
| Process Specification and Operator Qualification for Laser Beam Welding - First Edition | 2008.01.01 | AWS C7.4/C7.4M |
| Characterization of Arc Welding Fume | 1983.03.01 | AWS CAWF |
| Certification Manual for Welding Inspectors - Fourth Edition | 2000.01.01 | AWS CM |
| CERTIFIED WELDING SUPERVISOR MANUAL FOR QUALITY AND PRODUCTIVITY IMPROVEMENT | 2005.01.01 | AWS CMWS |
| CODE CLINIC For Study of AWS D1.1/D1.1M: 2010 Structural Welding Code-Steel | 2010.01.01 | AWS D1.1 CCRM |
| Structural Welding Code - Steel - 22nd Edition | 2010.01.01 | AWS D1.1/D1.1M |
| A Collection of Responses to Formal Inquiries about the Requirements of AWS D1.1 (1976–2008) - Second Edition | 2008.01.01 | AWS D1.1-BI |
| Structural Welding Code- Aluminum - Fifth Edition | 2008.01.01 | AWS D1.2/D1.2M |
| Structural Welding Code - Sheet Steel - 5th Edition | 2008.01.01 | AWS D1.3/D1.3M |
| Structural Welding Code-Reinforcing Steel - 7th Edition | 2011.01.01 | AWS D1.4/D1.4M |
| Bridge Welding Code - 6th Edition | 2010.01.01 | AWS D1.5M/D1.5 |
| Structural Welding Code- Stainless Steel | 2007.01.01 | AWS D1.6/D1.6M |
| Guide for Strengthening and Repairing Existing Structures | 2010.01.01 | AWS D1.7/D1.7M |
| Structural Welding Code-Seismic Supplement - Second Edition | 2009.01.01 | AWS D1.8/D1.8M |
| Structural Welding Code- Titanium - 1st Edition | 2007.01.01 | AWS D1.9/D1.9M |
| Recommended Practices for Local Heating of Welds in Piping and Tubing - 3rd Edition | 1999.01.01 | AWS D10.10/D10.10M |
| Guide for Root Pass Welding of Pipe Without Backing | 2007.01.01 | AWS D10.11M/D10.11 |
| Guide for Welding Mild Steel Pipe | 2000.01.01 | AWS D10.12M/D10.12 |
| Recommended Practices for the Brazing of Copper Tubing and Fittings for Medical Gas Systems | 2001.01.01 | AWS D10.13/D10.13M |
| Guide for Multipass Orbital Machine Pipe Groove Welding - First Edition | 2010.01.01 | AWS D10.14M/D10.14 |
| Guide for Welding Ferritic/Austenitic Duplex Stainless Steel Piping and Tubing - First Edition | 2008.01.01 | AWS D10.18M/D10.18 |
| Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing | 1986.01.01 | AWS D10.4 |
| Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing | 2000.01.01 | AWS D10.6/D10.6M |
| Guide for the Gas Shielded ArcWelding of Aluminum and Aluminum Alloy Pipe - 4th edition | 2008.01.01 | AWS D10.7M/D10.7 |
| Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing | 1996.01.01 | AWS D10.8 |
| Guide for Welding Iron Castings | 1989.01.01 | AWS D11.2 |
| Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment | 2005.01.01 | AWS D14.1/D14.1M |
| Specification for Welding Earthmoving, Construction, and Agricultural Equipment - Sixth Edition | 2010.01.01 | AWS D14.3/D14.3M |
| Specification for the Design of Welded Joints in Machinery and Equipment - 4th Edition | 2012.01.01 | AWS D14.4/D14.4M |
| Specification for Welding of Presses and Press Components - 3rd Edition | 2009.01.01 | AWS D14.5/D14.5M |
| Specification for Welding of Rotating Elements of Equipment - 4th Edition | 2012.01.01 | AWS D14.6/D14.6M |
| Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls - 1st Edition | 2005.01.01 | AWS D14.7/D14.7M |
| Standard Methods for the Avoidance of Cold Cracks - First Edition | 2009.01.01 | AWS D14.8M |
| Specification for the Welding of Hydraulic Cylinders - First Edition | 2013.01.01 | AWS D14.9/D14.9M |
| Railroad Welding Specification for Cars and Locomotives - Fifth Edition | 2012.01.01 | AWS D15.1/D15.1M |
| Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles - 3rd Edition | 2013.01.01 | AWS D15.2/D15.2M |
| Specification for Robotic Arc Welding Safety | 2004.01.01 | AWS D16.1M/D16.1 |
| Guide for Components of Robotic and Automatic Arc Welding Installations | 2007.01.01 | AWS D16.2M/D16.2 |
| Risk Assessment Guide for Robotic Arc Welding - 2nd Edition | 2009.01.01 | AWS D16.3M/D16.3 |
| Specification for the Qualification of Robotic Arc Welding Personnel - 2nd Editon | 2005.01.01 | AWS D16.4M/D16.4 |
| Specification for Fusion Welding for Aerospace Applications - 2nd Edition | 2010.01.01 | AWS D17.1/D17.1M |
| Specification for Resistance Welding for Aerospace Applications. - 2nd Edition | 2013.01.01 | AWS D17.2/D17.2M |
| Specification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications - 1st Edition | 2010.01.01 | AWS D17.3/D17.3M |
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications - 2nd Edition | 2009.01.01 | AWS D18.1/D18.1M |
| Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications | 2005.01.01 | AWS D18.3/D18.3M |
| Guide for Steel Hull Welding | 1993.01.01 | AWS D3.5 |
| Underwater Welding Code - 5th Edition | 2010.01.01 | AWS D3.6M |
| Guide for Aluminum Hull Welding | 2004.01.01 | AWS D3.7 |
| Specification for Classification of Weld-Through Paint Primers - 1st Edition | 2010.01.01 | AWS D3.9 |
| Specification for Automotive Weld Quality- Arc Welding of Aluminum - Second Edition | 2008.01.01 | AWS D8.14M |
| Specification for Automotive Weld Quality- Resistance Spot Welding of Steel | 2007.01.01 | AWS D8.1M |
| Specification for Automotive Resistance Spot Welding Electrodes - Supplement to RWMA Bulletin 16 | 2005.01.01 | AWS D8.6 |
| Recommended Practices for Automotive Weld Quality Resistance SpotWelding | 2005.01.01 | AWS D8.7M |
| Specification for Automotive Weld Quality-Arc Welding of Steel | 2007.01.01 | AWS D8.8M |
| Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials - Third Edition | 2012.01.01 | AWS D8.9M |
| Sheet Metal Welding Code - 6th Edition | 2012.01.01 | AWS D9.1M/D9.1 |
| Design and Planning Manual for Cost-Effective Welding | 1999.01.01 | AWS DPW |
| Guide for the Training of Welding Personnel: Level I-Entry Welder | 2008.01.01 | AWS EG2.0 |
| Guide for the Training and Qualification of Welding Personnel Level II - Advanced Welder | 1996.01.01 | AWS EG3.0 |
| Guide for the Training and Qualification of Welding Personnel Level III - Expert Welder | 1996.01.01 | AWS EG4.0 |
| Effects of Welding on Health I | 1979.01.01 | AWS EWH-1 |
| Effects of Welding on Health X (1992 - 1994) | 1998.01.01 | AWS EWH-10 |
| Effects of Welding on Health, XI | 2001.01.01 | AWS EWH-11 |
| Effects of Welding on Health, XII | 2003.01.01 | AWS EWH-12 |
| Effects of Welding on Health, XIII | 2007.01.01 | AWS EWH-13 |
| Effects of Welding on Health II | 1981.01.01 | AWS EWH-2 |
| Effects of Welding on Health III | 1983.01.01 | AWS EWH-3 |
| Effects of Welding on Health IV | 1983.01.01 | AWS EWH-4 |
| Effects of Welding on Health V | 1987.01.01 | AWS EWH-5 |
| Effects of Welding on Health VI | 1989.01.01 | AWS EWH-6 |
| Effects of Welding on Health VII | 1990.01.01 | AWS EWH-7 |
| Effects of Welding on Health VIII | 1994.01.01 | AWS EWH-8 |
| Effects of Welding on Health IX | 1995.01.01 | AWS EWH-9 |
| Effects of Welding on Health, Index-I through XIV | 2012.01.01 | AWS EWH-I |
| Method for Sampling Airborne Particulates Generated by Welding and Allied Processes | 2006.01.01 | AWS F1.1M |
| Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Processes - 6th Edition | 2013.01.01 | AWS F1.2 |
| A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment | 2006.01.01 | AWS F1.3M |
| Methods for Sampling and Analyzing Gases from Welding and Allied Processes | 2003.01.01 | AWS F1.5M |
| Guide for Estimating Welding Emissions for EPA and Ventilation Permit Reporting | 2003.01.01 | AWS F1.6 |
| Lens Shade Selector | 2001.01.01 | AWS F2.2 |
| Specification for Use and Performance of Transparent Welding Curtains and Screens - 2nd Edition | 2011.01.01 | AWS F2.3M |
| Ventilation Guide for Weld Fume | 2001.01.01 | AWS F3.2M/F3.2 |
| Safe Practices for the Preparation of Containers and Piping forWelding and Cutting - Fifth edition | 2007.01.01 | AWS F4.1 |
| Filler Metal Comparison Charts | 2000.01.01 | AWS FMC |
| Design Handbook for Calculating Fillet Weld Sizes | 1997.01.01 | AWS FWSH |
| Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds | 2001.01.01 | AWS G1.10M |
| Guide to Ultrasonic Assembly of Thermoplastics | 2006.01.01 | AWS G1.1M/G1.1 |
| Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics - First Edition | 1999.01.01 | AWS G1.2M/G1.2 |
| Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds | 2006.01.01 | AWS G1.6 |
| Guide for the Joining of Wrought Nickel-Based Alloys | 2012.01.01 | AWS G2.1M/G2.1 |
| Guide for the Joining of Solid Solution Austenitic Stainless Steels - 2nd Edition | 2012.01.01 | AWS G2.3M/G2.3 |
| Guide for the Fusion Welding of Titanium and Titanium Alloys | 2007.01.01 | AWS G2.4/G2.4M |
| Guide for the Fusion Welding of Zirconium and Zirconium Alloys - 1st Edition | 2012.01.01 | AWS G2.5/G2.5M |
| Guide to Weldability Carbon and Low Alloy Steels | 2005.01.01 | AWS GTW |
| Guide for the Design of a Welder Training Facility | 1998.01.01 | AWS GWF |
| AWS HST INCH HANDS-ON, SELF-TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR'S TOOLKIT IN INCH - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide. | 2009.01.01 | AWS HST INCH |
| AWS HST METRIC HANDS-ON, SELF-TRAINING INCLUDES THE FOLLOWING: AWS B1.10, AWS B1.11, AWS VIW-M AND THE WELDING INSPECTOR'S TOOLKIT IN METRIC - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide. | AWS HST METRIC | |
| INTERNATIONAL BRAZING & | 2009.01.01 | AWS IBSC |
| AWS PUBLICATIONS CATALOG - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide | 2011.01.01 | AWS INDEX |
| Jefferson´s Welding Encyclopedia - Eighteenth Edition | 1997.01.01 | AWS JWE |
| Laboratory Validation of Ozone Sampling with Spill-Proof Impingers | 1983.01.01 | AWS LVOS |
| The Professional's Advisor on Procedure Qualification Variables/Cross Reference - Tables for AWS D1.1, AWS D1.5, AWS B2.1, ASME IX, and API 1104 | 2005.01.01 | AWS PAPQV |
| The Professionals Advisor on Arc Welding Power Sources and Related Equipment | 1999.01.01 | AWS PAPS |
| The Professional´s Advisor on Resistance Welding | 1998.01.01 | AWS PARW |
| Professional´s Advisor on Welding Stainless Steels | 1999.01.01 | AWS PASS |
| STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS | 2007.01.01 | AWS QC1 |
| Specification for Qualification and Certification of Level I-Entry Welder | 2008.01.01 | AWS QC10 |
| Specification for Qualification and Certification for Level II - Advanced Welders | 1996.01.01 | AWS QC11 |
| Specification for Qualification and Certification for Level III - Expert Welders | 1996.01.01 | AWS QC12 |
| Specification for the Certification of Welding Sales Representatives - 1st Edition | 2009.01.01 | AWS QC14 |
| STANDARDS FOR THE AWS CERTIFICATION OF ROBOTIC ARC WELDING PERSONNEL | 2002.01.01 | AWS QC19 |
| Specification for AWS Certification of Resistance Welding Technicians - 1st Edition | 2011.01.01 | AWS QC20 |
| Standard for Accreditation of Test Facilities for AWS Certified Welder Program | 1989.01.01 | AWS QC4 |
| Standard for Certification of Welding Educators | 1991.01.01 | AWS QC5 |
| Standard for AWS Certified Welders | 1993.01.01 | AWS QC7 |
| Supplement C- Welder Performance Qualification Sheet Metal Test Requirements | 1993.01.01 | AWS QC7 SUPP C |
| Supplement F-Chemical Plant and Petroleum Refinery Piping | 1993.01.01 | AWS QC7 SUPP F |
| Supplement G-AWS Performance Qualification Test | 1993.01.01 | AWS QC7 SUPP G |
| Resistance Welding Manual - 4th Edition | 2003.01.01 | AWS RWM |
| Maintenance Manual for Resistance Welding Machines | 1996.01.01 | AWS RWMA BULLETIN 14 |
| Resistance Welding Equipment Standards | 1996.08.01 | AWS RWMA BULLETIN 16 |
| Manufacturer's Cross References of Standard Resistance Welding Electrode Numbers and Alloys | 1997.01.01 | AWS RWMA BULLETIN 34 |
| Resistance Welding Control Standard | 1994.01.01 | AWS RWMA BULLETIN 5 |
| Resistance Welding Pocket Handbook - 1st Edition | 2011.01.01 | AWS RWPH |
| The Independent Shop s Guide to Welding Safety and Health | 2003.01.01 | AWS SGSH |
| Soldering Handbook - Third Edition | 2000.01.01 | AWS SHB |
| Safety and Health Fact Sheets - Third Edition | 2003.01.01 | AWS SHF |
| Safe Practices - Reprint of WHB-1 CH 16 | 1988.01.01 | AWS SP |
| Welded Joint Details for Structural Applications,Oversized Wall Chart Based on D1.1 | 2008.01.01 | AWS SWJ-WC |
| Thermal Spray Manual - A Practicle Reference Guide | 1996.01.01 | AWS TSM |
| Thermal Spraying - Practice, Theory, and Application | 1985.01.01 | AWS TSS |
| TOTAL WELDING MANAGEMENT EXPLAINS THE MANAGEMENT PRINCIPLES, STRUCTURE AND DETAILS YOU NEED TO TRANSFORM YOUR WELDING OPERATIONS FROM A COST CENTER INTO A PROFIT CENTER. MARRIAGE OF TECHNOLOGY AND MANAGEMENT PRINCIPLES-HARDBOUND COPY | 2005.01.01 | AWS TWM |
| Handbook on the Ultrasonic Examination of Austenitic Welds | 1986.01.01 | AWS UEAW |
| AWS User’s Guide to Filler Metals | 2010.01.01 | AWS UGFM |
| ULTRAVIOLET REFLECTANCE OF PAINT | 1976.08.06 | AWS ULR |
| Visual Inspection Workshop Reference Manual - Fourth Edition | 2008.01.01 | AWS VIW-M |
| Welding Handbook Volume 1 - Welding Science and Technology - Ninth Edition | 2001.01.01 | AWS WHB-1.9 |
| Welding Handbook - Welding Processes, Part 1 - Volume 2 | 2004.01.01 | AWS WHB-2.9 |
| Welding Handbook - Materials and Applications - Part 1 - Volume 3 | 1996.01.01 | AWS WHB-3.8 |
| Welding Handbook, Vol. 3, Welding Processes, Part 2 - Ninth Edition | 2007.01.01 | AWS WHB-3.9 |
| Materials and Applications Part 1 - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide | 2010.01.01 | AWS WHB-4.9 |
| Welding Metallurgy | 2001.01.01 | AWS WHC1.04 |
| Design for Welding | 2001.01.01 | AWS WHC1.05 |
| Test Methods for Evaluating Welded Joints | 2001.01.01 | AWS WHC1.06 |
| Residual Stress and Distortion | 2001.01.01 | AWS WHC1.07 |
| Symbols for Joining and Inspection | 2001.01.01 | AWS WHC1.08 |
| Monitoring and Control of Welding and Joining Processes | 2001.01.01 | AWS WHC1.10 |
| Mechanized, Automated, and Robotic Welding | 2001.01.01 | AWS WHC1.11 |
| Economics of Welding and Cutting | 2001.01.01 | AWS WHC1.12 |
| Welding Inspection Handbook - Third Edition | 2000.01.01 | AWS WI |
| Welding Inspection Technology - Fifth Edition | 2008.01.01 | AWS WIT-T |
| Welding Inspection Technology Wookbook - Fifth Edition | 2008.01.01 | AWS WIT-W |
| Welding Metallurgy Volume I, Fundamentals - Fourth Edition | 1994.01.01 | AWS WM 1.4 |
| WELDING ALUMINUM – QUESTIONS AND ANSWERS – A PRACTICAL GUIDE FOR TROUBLESHOOTING ALUMINUM-RELATED PROBLEMS - SECOND EDITION | 2010.01.01 | AWS WQA |
| Welding Zinc-Coated Steel - First Edition | 1972.01.01 | AWS WZC |
| Safety in Welding, Cutting and Allied Processes | 2012.01.01 | AWS Z49.1 |
قابل جستجو بر اساس موضوع ، سال و شماره (کلید Ctrl+F)