ورود به سایت
ثبت نام
بازدیدها: 6136
جزئیات آرشیو کامل API
|
قیمت (تومان) |
سایز GB |
تعداد |
ویرایش |
موضوع |
نام استاندارد |
|
800,000 |
14 |
4,370 |
فول آپدیت از 1925 تا سال 2014 |
استانداردهاي انجمن نفت آمريكا |
API 2014 |
تلفن تماس: 49720000 (سی خط) فاکس: 49720200 (از ساعت 8:45 الی 16:30)
همراه: 09121554226 (از ساعت 10 الی 22) تلقن های آنالوگ: 44159850 و 44158017 و 44163957
از این آدرس ایمیل در مقابل روبوت های اسپمر محافظت می شود. جهت مشاهده آن باید جاوااسکریپت فعال باشد.
لیست کامل استانداردهای API
قابل جستجو بر اساس موضوع ، سال و شماره (کلید Ctrl+F)
| Full Scale Performance Tests of Environmentally Acceptable Thread Compounds | 1997.12.01 | API 1033A |
| Issue Analysis Achieving The Kyoto Protocol: An Analysis Of Policy Options | 1998.03.01 | API 103R |
| Computational Pipeline Monitoring for Liquid Pipelines - Second Edition | 2002.11.01 | API 1130 |
| Benchmark Ultimate Strength Analysis - Sample Application of API RP 2A, Section 17 | 1997.09.01 | API 1320 |
| Engine Oil Licensing and Certification System - SEVENTEENTH EDITION | 2012.09.01 | API 1509 |
| Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration - Ninth Edition: Includes Errata April 2009 | 2006.06.01 | API 510 |
| Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration - Ninth Edition | 2006.06.01 | API 510 CHINESE |
| Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems - Third Edition | 2009.11.01 | API 570 |
| Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems - Third Edition | 2009.11.01 | API 570 CHINESE |
| Fitness-for-Service - Second Edition | 2007.06.05 | API 579-1 |
| Fitness-for-Service - Second Edition | 2007.06.01 | API 579-1 CD |
| Fitness-for-Service - Second Edition | 2007.06.01 | API 579-1 COMBO |
| Fitness-For-Service - Second Edition | 2009.02.01 | API 579-1 ERTA |
| Fitness-For-Service Example Problem Manual - First Edition | 2009.08.11 | API 579-2 |
| Implementation Status Assessment 1998 Summary Report to the American Petroleum Institute - Final Report | 1999.07.06 | API 75 |
| Handbook on equipment used for the maintenance and delivery of clean aviation fuel - First Edition | 2007.10.01 | API API/EI 1550 |
| Guidance in the cleaning of aviation fuel hydrant systems at airports - Second Edition | 2007.11.01 | API API/EI 1585 |
| Verification of lightning protection requirements for above ground hydrocarbon storage tanks - First Edition | 2009.10.01 | API API/EI 545-A |
| Manual of Petroleum Measurement Standards Chapter 19.5 - EI Hydrocarbon Management HM 65 Atmospheric hydrocarbon emissions from marine vessel transfer operations - First Edition | 2009.09.01 | API API/EI MPMS 19.5 |
| Four-inch hydrant system components and arrangements - Third Edition | 2007.02.01 | API API/EI SPEC 1584 ADD |
| DESIGN AND CONSTRUCTION OF AVIATION FUEL FILTER VESSELS - First Edition | 2006.11.01 | API API/IP 1596 |
| PROCEDURES FOR OVERWING FUELLING TO ENSURE DELIVERY OF THE CORRECT FUEL GRADE TO AN AIRCRAFT - First Edition | 2006.12.01 | API API/IP 1597 |
| LABORATORY TESTS AND MINIMUM PERFORMANCE LEVELS FOR AVIATION FUEL DIRT DEFENCE FILTERS - First Edition | 2007.03.01 | API API/IP 1599 |
| DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES - Fourth Edition | 2004.02.01 | API API/IP RP 1540 |
| Specifications and Qualification Procedures for Aviation Jet Fuel Filter/Separators - Fifth Edition | 2002.07.01 | API API/IP SPEC 1581 |
| Specifications and qualification procedures for aviation jet fuel filter/separators - Fifth Edition | 2006.12.20 | API API/IP SPEC 1581 ADD |
| Specification for Similarity for API/IP 1581 Aviation Jet Fuel Filter/Separators - First Edition | 2001.02.01 | API API/IP SPEC 1582 |
| SPECIFICATIONS AND LABORATORY TESTS FOR AVIATION FUEL FILTER MONITORS WITH ABSORBENT TYPE ELEMENTS - Per SDO No Longer Available for Sale * Fourth Edition | 2005.04.01 | API API/IP SPEC 1583 ADD |
| Four-Inch Hydrant System Components and Arrangements - Third Edition | 2007.02.01 | API API/IP SPEC 1584 |
| Specifications and Qualification Procedures for Avaiation Fuel Microfilters - Second Edition | 2002.04.01 | API API/IP SPEC 1590 |
| AVIATION FUELLING HOSE AND HOSE ASSEMBLIES - Sixth Editon | 2005.05.01 | API API/IP STD 1529 |
| Identification markings for dedicated aviation fuel manufacturing and distribution facilities, airport storage and mobile fuelling equipment - Eighth edition | 2007.08.01 | API API/IP STD 1542 |
| Considerations for electronic sensors to monitor free water and/or particulate matter in aviation fuel - First Edition | 2007.07.01 | API API/IP STD 1598 |
| BASIC PETROLEUM DATA BOOK - Volume 33, Number 1 | 2013.02.01 | API BASIC PETRO DATA |
| Guidance for Post-hurricane Structural Inspection of Offshore Structures - First Edition | 2009.05.01 | API BULL 2HINS |
| Interim Guidance for Design of Offshore Structures for Hurricane Conditions - First Edition | 2007.05.01 | API BULL 2INT-DG |
| Interim Guidance for Assessment of Existing Offshore Structures for Hurricane Conditions - First Edition | 2007.05.01 | API BULL 2INT-EX |
| Interim Guidance on Hurricane Conditions in the Gulf of Mexico - First Edition | 2007.05.01 | API BULL 2INT-MET |
| Interim Guidance on Hurricane Conditions in the Gulf of Mexico - First Edition | 2007.10.01 | API BULL 2INT-MET ERTA |
| Guidelines for Tie-downs on Offshore Production Facilities for Hurricane Season - First Edition | 2006.06.01 | API BULL 2TD |
| Bulletin on Stability Design of Cylindrical Shells - Third Edition | 2004.06.01 | API BULL 2U |
| Design of Flat Plate Structures - Third Edition | 2004.06.01 | API BULL 2V |
| Design of Flat Plate Structures - Third Edition | 2004.06.01 | API BULL 2V ERTA |
| Bulletin on Performance Properties of Casing, Tubing, and Drill Pipe - Twenty-First Edition | 1999.10.01 | API BULL 5C2 |
| Guidance Document for the Development of a Safety and Environmental Management System for Onshore Oil and Natural Gas Production Operations and Associated Activities - First Edition | 2007.11.01 | API BULL 75L |
| Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine Environment - FIRST EDITION | 2007.06.01 | API BULL 91 |
| Identification, Repair, and Mitigation of Cracking of Steel Equipment in Fuel Ethanol Service - FIRST EDITION | 2008.11.01 | API BULL 939E |
| Suggested Procedure for Development of a Spill Prevention Control and Countermeasure Plan - Fifth Edition | 2011.04.01 | API BULL D16 |
| Suggested Procedure for Development of Spill Prevention Control and Countermeasure Plans - Plan Template - Fifth Edition | 2011.04.01 | API BULL D16 TEMPLATE |
| Bulletin on Management of Naturally Occurring Radioactive Materials (NORM) in Oil & | 2006.04.01 | API BULL E2 |
| Environmental Guidance Document: Release Reporting for the Oil and Gas Exploration and Production Industry as Required by the Clean Water Act, the Comprehensive Environmental Response, Compensation and Liability Act, and the Emergency Planning and Community Right-to-Know Act - Second Edition | 2003.05.01 | API BULL E4 |
| PUBLICATIONS PROGRAMS AND SERVICES | 2008.01.01 | API CATALOG |
| AMERICAN PETROLEUM INSTITUTE PUBLICATIONS & | 2010.01.01 | API CATALOG CD |
| 1996 API Coke Drum Survey | 2003.11.01 | API COKE DRUM SURVEY |
| COMMUNITY MATTERS - COMMUNITY OUTREACH GUIDANCE MANUAL FOR EXPLORATION AND PRODUCTION - First Edition | 2000.11.01 | API COMMUNITY MATTERS |
| A Compendium of Case Law: Federal Jurisdiction over “Navigable Watersâ€/“Waters of the United States†| 2004.06.01 | API COMPENDIUM OF CASE LAW |
| The API Composite List | 2012.07.01 | API COMPOSITE LIST |
| Cumulative Impact of Environmental Regulations on the U.S. Petroleum Refining, Transportation and Marketing Industries | 1997.10.01 | API CUMULATIVE IMPACT |
| Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery | 2002.02.01 | API DR 145 |
| Identification of Organic Toxicants in Treated Refinery Effluents | 1997.12.01 | API DR 148 |
| Pilot Study in Los Angeles to Measure Personal Ozone Exposures During Scripted Activities - Appendices | 1997.04.01 | API DR 218 |
| Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at Sarnia, Ontario | 1998.10.01 | API DR 225 |
| Toxicity Bioassays on Dispersed Oil in the North Sea: June 1996 Field Trials | 2002.06.01 | API DR 342 |
| Phase Equilibria in Systems Containing Water | 1998.12.01 | API DR 9 |
| Environmental Guidance Document: Waste Management in Exploration and Production Operations - Second Edition | 1997.02.01 | API E5 |
| Executive Summary Literature Review Impact of Gasoline Blended with Ethanol on the Long-Term Structural Integrity of Liquid Petroleum Storage Systems and Components | 2002.06.01 | API ETHANOL STUDY |
| Final Report 1996 American Petroleum Institute/National Petroleum Refiners Association Survey of Refining Operations and Product Quality - First Edition | 1997.07.01 | API FINAL REPORT 1996 |
| Compendium of Greenhouse Gas Emissions Estimation Methodologies for the Oil and Gas Industry - Pilot Test Version | 2001.04.01 | API GHG1 |
| GUIDELINES FOR PROPERTY DEVELOPMENT | 2009.01.01 | API GUIDELINES |
| Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Single-Phase, Intermediate and Finished Hydrocarbon Fluids by Coriolis Meters | 2000.11.01 | API H00004 |
| Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products - First Edition | 2000.11.01 | API H00005 |
| Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Crude Oil by Coriolis Meters | 2001.06.01 | API H00006 |
| Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology - First Edition | 2002.10.01 | API H00008 |
| Hydraulic Fracturing Operations- Well Construction and Integrity Guidelines - First Edition | 2009.10.01 | API HF1 |
| Water Management Associated with Hydraulic Fracturing - First Edition | 2010.06.01 | API HF2 |
| Practices for Mitigating Surface Impacts Associated with Hydraulic Fracturing - First Edition | 2011.01.01 | API HF3 |
| Human Factors in New Facility Design Tool - Second Edition | 2005.10.01 | API HUMAN FACTORS 2005 |
| Human Factors Tool for Existing Operations - First Edition | 2006.02.01 | API HUMAN FACTORS 2006 |
| Imports and Exports of Crude Oil & | 2013.04.01 | API IMPORTS & EXPORTS |
| PUBLICATIONS, PROGRAMS, AND SERVICES CATALOG | 2000.01.01 | API INDEX |
| INVENTORIES OF NATURAL GAS LIQUIDS AND LIQUIFIED REFINERY GASES | 2013.05.01 | API INVENTORIES OF GAS |
| 2011 JOINT ASSOCIATION SURVEY ON DRILLING COSTS | 2013.04.01 | API JAS |
| Joint Association Survey on Drilling Costs 2009: U.S. Summary Tables of Estimated Costs of Drilling and Equipping Wells-States and Regions - SEND CUSTOMER DIRECT TO از این آدرس ایمیل در مقابل روبوت های اسپمر محافظت می شود. جهت مشاهده آن باید جاوااسکریپت فعال باشد. | 2009.01.01 | API JAS STATE |
| Monthly Statistical Report - Volume: 37 Number: 4 | 2013.04.01 | API MONTHLY STAT |
| Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water, Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method - THIRD EDITION | 2007.11.01 | API MPMS 10.1 |
| Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Standard Test Method for Water in Crude Oil by Distillation - SECOND EDITION | 2007.11.01 | API MPMS 10.2 |
| Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 3-Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) - THIRD EDITION | 2008.05.01 | API MPMS 10.3 |
| Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 4-Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) - Third Edition | 1999.12.01 | API MPMS 10.4 |
| Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 5-Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation - Fourth Edition | 2005.08.01 | API MPMS 10.5 |
| Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 6 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) - Fourth Edition | 2004.12.01 | API MPMS 10.6 |
| Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 7-Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration - Second Edition | 2002.12.01 | API MPMS 10.7 |
| Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 8 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration - Second Edition | 2005.11.01 | API MPMS 10.8 |
| Manual of Petroleum Measurement Standards Chapter 10.9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration - Third Edition | 2013.05.01 | API MPMS 10.9 |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 1-Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils - Addendum 1: 9/2007: Includes Access to Additional Content | 2004.05.01 | API MPMS 11.1 |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 2, Part 4-Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 54E, 59E, and 60E - First Edition | 2007.09.01 | API MPMS 11.2.4 |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 2, Part 4-Temperature Correction for the Volume of NGL and LPG Tables 23E, 24E, 53E, 54E, 59E, and 60E - First Edition | 2011.09.01 | API MPMS 11.2.4 ERTA |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 2, Part 5-A Simplified Vapor Pressure Correlation for Commercial NGLs - First Edition | 2007.09.01 | API MPMS 11.2.5 |
| Manual of Petroleum Measurement Standards Chapter 11.3.2.1 Ethylene Density - Second Edition | 2013.05.01 | API MPMS 11.3.2.1 |
| Manual of Petroleum Measurement Standards Chapter 11.3.3 Miscellaneous Hydrocarbon Product Properties - Ethanol Density and Volume Correction Factors - First Edition | 2011.07.01 | API MPMS 11.3.3 |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers - First Edition | 2003.12.01 | API MPMS 11.4.1 |
| Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers - First Edition | 2011.09.01 | API MPMS 11.4.1 ERTA |
| Density/Weight/Volume Intraconversion - First Edition | 2009.03.01 | API MPMS 11.5 |
| Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 1 - Conversions of API Gravity at 60 °F - First Edition | 2009.03.01 | API MPMS 11.5.1 |
| Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 2 - Conversions for Relative Density (60/60 °F) - First Edition | 2009.03.01 | API MPMS 11.5.2 |
| Manual of Petroleum Measurement Standards Chapter 11 - Physical Properties Data Section 5 - Density/Weight/Volume Intraconversion Part 3 - Conversions for Absolute Density at 15 °C - First Edition | 2009.03.01 | API MPMS 11.5.3 |
| Manual of Petroleum Measurement Standards Chapter 12.1.1-Calculation of Static Petroleum Quantities-Upright Cylindrical Tanks and Marine Vessels - Third Edition | 2012.04.01 | API MPMS 12.1.1 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 12-Cálculo de Cantidades de Petróleo Sección 1-Cálculo de Cantidades de Petróleo Estático Parte 1-Tanques CilÃndricos Verticales y Buques - SEGUNDA EDICIÓN | 2001.11.01 | API MPMS 12.1.1 SPANISH |
| Manual de Estándares de Medición de Petróleo Capitulo 12-Cálculo de Cantidades de Petróleo | 2007.08.01 | API MPMS 12.1.1 SPANISH ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 1 - Calculation of Static Petroleum Quantities Part 2 - Calculation Procedures for Tank Cars - First Edition | 2003.05.01 | API MPMS 12.1.2 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities | 2007.08.01 | API MPMS 12.1.2 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - First Edition | 2007.08.01 | API MPMS 12.2 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - Second Edition | 2007.08.01 | API MPMS 12.2.1 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 1 - Introduction - Second Edition | 2009.07.01 | API MPMS 12.2.1 ERTA |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities Section 2-Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 2-Measurement Tickets - Third Edition | 2003.06.01 | API MPMS 12.2.2 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - Third Edition | 2007.08.01 | API MPMS 12.2.2 ADD 1 |
| Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports - First Edition | 1998.10.01 | API MPMS 12.2.3 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - First Edition | 2007.08.01 | API MPMS 12.2.3 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by the Waterdraw Method - First Edition | 1997.12.01 | API MPMS 12.2.4 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - First Edition | 2007.08.01 | API MPMS 12.2.4 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by the Waterdraw Method - First Edition | 2009.07.01 | API MPMS 12.2.4 ERTA |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Master Meter Method - First Edition | 2001.09.01 | API MPMS 12.2.5 |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities | 2007.08.01 | API MPMS 12.2.5 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Master Meter Method - First Edition | 2009.07.01 | API MPMS 12.2.5 ERTA |
| Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities - First Edition | 2007.08.01 | API MPMS 12.3 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 1-Collecting and Handling of Natural Gas Samples for Custody Transfer - Sixth Edition | 2006.02.01 | API MPMS 14.1 |
| Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 10-Measurement of Flow to Flares - FIRST EDITION | 2007.07.01 | API MPMS 14.10 |
| Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids - Concentric, Square-edged Orifice Meters Part 1: General Equations and Uncertainty Guidelines - FOURTH EDITION | 2012.09.01 | API MPMS 14.3.1 |
| Manual of Petroleum Measurement Standards Chapter 14 Natural Gas Fluids Measurement Section 3Concentric, Square-Edged Orifice Meters Part 2Specification and Installation Requirements - Fourth Edition | 2000.04.01 | API MPMS 14.3.2 |
| Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer - THIRD EDITION | 2009.01.01 | API MPMS 14.5 |
| Manual of Petroleum Measurement Standards Chapter 14.7 - Mass Measurement of Natural Gas Liquids - Fourth Edition | 2012.04.01 | API MPMS 14.7 |
| Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 8-Liquefied Petroleum Gas Measurement - Second Edition | 1997.07.01 | API MPMS 14.8 |
| Measurement of Natural Gas by Coriolis Meter - First Edition | 2003.01.01 | API MPMS 14.9 |
| Manual of Petroleum Measurement Standards Chapter 15-Guidelines for the Use of the International System of Units (SI) in the Petroleum and Allied Industries - THIRD EDITION | 2001.12.01 | API MPMS 15 |
| Manual of Petroleum Measurement Standards Chapter 17-Marine Measurement Section 1-Guidelines for Marine Cargo Inspection - Fifth Edition | 2008.03.01 | API MPMS 17.1 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 17 ─ Mediciones Marίtimas Sección 1 ─ Guίas Para la Inspección de Cargas Marίtimas - QUINTA EDICION | 2008.03.01 | API MPMS 17.1 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 17-Marine Measurement Section 10-Measurement of Refrigerated and/or Pressurized Cargoes on Board Marine Gas Carriers Part 2-Liquefied Petroleum and Chemical Gases Measurement Coordination Department EI Hydrocarbon Management HM 55 - First Edition | 2007.11.01 | API MPMS 17.10.2 |
| API Manual of Petroleum Measurement Standards Chapter 17.11 EI Hydrocarbon Management HM 52 Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment - First Edition | 2009.05.01 | API MPMS 17.11 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 17-Medición Marina Sección 11 - Medición y Muestreo de Cargas a Bordo de Buque Tanques Utilizando Equipo Cerrado y Restringido - PRIMERA EDICIÓN | 2009.05.01 | API MPMS 17.11 SPANISH |
| Procedure for bulk liquid chemical cargo inspection by cargo inspectors - First Edition | 2008.09.01 | API MPMS 17.12 |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels - Second Edition | 1999.05.01 | API MPMS 17.2 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 17-Mediciones MarÃtimas Sección 2-Mediciones de cargas a bordo de buque tanques - SEGUNDA EDICIÓN | 1999.05.01 | API MPMS 17.2 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 17.5 - El Hydrocarbon Management - HM 64 - Guidelines for Voyage Analysis and Reconciliation of Cargo Quantities - Third Edition | 2012.04.01 | API MPMS 17.5 |
| Manual de Estándares de Medición de Petróleo Capitulo 17Mediciones Maritimas Sección 5GuÃas Para el Análisis de Carga y la Reconciliación de cantidades de Carga - SEGUNDA EDICIÓN | 2003.11.01 | API MPMS 17.5 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 17-Marine Measurement Section 8-Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks - First Edition | 1998.08.01 | API MPMS 17.8 |
| Manual de Estándares de Medición de Petróleo Capitulo 17Mediciones Maritimas Sección 8GuÃas para la Inspección de Tanques de Buques antes de la Carga - PRIMERA EDICION | 1998.08.01 | API MPMS 17.8 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 17 El Hydrocarbon Management HM 49 Marine Measurement Section 9-Vessel Experience Factor (VEF) - Second Edition | 2012.05.01 | API MPMS 17.9 |
| Manual de Estándares de Medición del Petróleo Capitulo 17-Mediciones MarÃtimas Sección 9-Factor de Experiencia del Buque (VEF) EI Hydrocarbon Management HM 49 - SEGUNDA EDICIÓN | 2012.05.01 | API MPMS 17.9 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer Section 1 - Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck - Second Edition | 1997.04.01 | API MPMS 18.1 |
| Manual of Petroleum Measurement Standards Chapter 19.1 Evaporative Loss From Fixed-Roof Tanks - Fourth Edition | 2012.10.01 | API MPMS 19.1 |
| Manual of Petroleum Measurement Standards Chapter 19.2 Evaporative Loss From Floating-Roof Tanks - Third Edition | 2012.10.01 | API MPMS 19.2 |
| Manual of Petroleum Measurement Standards Chapter 19.3-Evaporative Loss Measurement Part A-Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks - First Edition | 1997.06.01 | API MPMS 19.3 PART A |
| Manual of Petroleum Measurement Standards Chapter 19.3-Evaporative Loss Measurement Part B-Air Concentration Test Method-Rim-Seal Loss Factors for Floating-Roof Tanks - First Edition | 1997.08.01 | API MPMS 19.3 PART B |
| Manual of Petroleum Measurement Standards Chapter 19.3-Evaporative Loss Measurement Part C-Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-roof Tanks - First Edition | 1998.07.01 | API MPMS 19.3 PART C |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck-Seam Loss Factors for Internal Floating-Roof Tanks - First Edition | 2001.06.01 | API MPMS 19.3 PART D |
| Manual of Petroleum Measurement Standards Chapter 19.3-Evaporative Loss Measurement Part E-Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks - First Edition | 1997.05.01 | API MPMS 19.3 PART E |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program - First Edition | 1997.03.01 | API MPMS 19.3 PART F |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration - First Edition | 1997.03.01 | API MPMS 19.3 PART G |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration - First Edition | 1998.03.01 | API MPMS 19.3 PART H |
| Manual of Petroleum Measurement Standards Chapter 19.4 Evaporative Loss Reference Information and Speciation Methodology - Third Edition | 2012.10.01 | API MPMS 19.4 |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method - First Edition | 2002.01.01 | API MPMS 2.2C |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2D - Calibration of Upright Cylindrical Tanks Using the Internal Electro-optical Distance-ranging Method - First Edition | 2003.08.01 | API MPMS 2.2D |
| Petroleum and Liquid Petroleum Products-Calibration of Horizontal Cylindrical Tanks Part 1: Manual Methods - First Edition | 2004.04.01 | API MPMS 2.2E |
| Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods - First Edition | 2009.11.11 | API MPMS 2.2E ERTA |
| Petroleum and Liquid Petroleum Products-Calibration of Horizontal Cylindrical Tanks Part 2: Internal Electro-optical Distance-ranging Method - First Edition | 2004.04.01 | API MPMS 2.2F |
| Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement - First Edition | 2013.01.01 | API MPMS 20.1 |
| Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement - First Edition | 2013.01.01 | API MPMS 20.1 ADD |
| Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow - First Edition | 2013.01.01 | API MPMS 20.3 |
| Manual of Petroleum Measurement Standards Chapter 21.1 - Flow Measurement Using Electronic Metering Systems - Electronic Gas Measurement - Second Edition | 2013.02.01 | API MPMS 21.1 |
| Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Section 2-Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters - First Edition | 1998.06.01 | API MPMS 21.2 |
| Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 2 - Flow Measurement using Electronic Metering Systems, Inferred Mass - First Edition | 2000.08.01 | API MPMS 21.2 ADD |
| General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids - First Edition | 2006.11.01 | API MPMS 22.1 |
| Manual of Petroleum Measurement Standards Chapter 22-Testing Protocol Section 2-Differential Pressure Flow Measurement Devices - First Edition | 2005.08.01 | API MPMS 22.2 |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products - Second Edition | 2005.08.01 | API MPMS 3.1A |
| Manual de Estándares de Medición de Petróleo CapÃtulo 3 - Medición del Tanque Sección 1A - Procedimiento Estándar para la Medición Manual de Petróleo y Productos del Petróleo - SEGUNDA EDICION | 2005.08.01 | API MPMS 3.1A SPANISH |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging - Second Edition | 2001.06.01 | API MPMS 3.1B |
| Manual de Estándares de Medición del Petróleo CapÃtulo 3 - Medición de Tanques Sección 1B - Práctica Estándar para la Medición del Nivel de Hidrocarburos LÃquidos en Tanques Estacionarios Mediante Medición Automática de Tanque - SEGUNDA EDICIÓN | 2001.06.01 | API MPMS 3.1B SPANISH |
| Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging Section 5-Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging - First Edition | 1997.03.01 | API MPMS 3.5 |
| Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging Section 6-Measurement of Liquid Hydrocarbons by Hybrid Tank Measurement Systems - Second Edition | 2001.02.01 | API MPMS 3.6 |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction - Third Edition | 2005.02.01 | API MPMS 4.1 |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers - Third Edition | 2003.09.01 | API MPMS 4.2 |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers - Second Edition | 1998.05.01 | API MPMS 4.4 |
| Manual of Petroleum Measurement Standards Chapter 4.5 Master Meter Provers - Third Edition | 2011.11.01 | API MPMS 4.5 |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation - Second Edition | 1999.05.01 | API MPMS 4.6 |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures - Third Edition | 2009.04.01 | API MPMS 4.7 |
| Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers - First Edition | 2005.10.01 | API MPMS 4.9.1 |
| Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration - First Edition | 2005.12.01 | API MPMS 4.9.2 |
| Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 3-Determination of the Volume of Displacement Provers by the Master Meter Method of Calibration Measurement Coordination - First Edition | 2010.04.01 | API MPMS 4.9.3 |
| Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 4-Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration - First Edition | 2010.10.01 | API MPMS 4.9.4 |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 1-General Considerations for Measurement by Meters - Fourth Edition | 2005.09.01 | API MPMS 5.1 |
| Manual de Estándares de Medición del Petróleo CapÃtulo 5 - Medición Sección 1 - Consideraciones Generales para la Medición con Medidores - CUARTA EDICIÓN | 2005.09.01 | API MPMS 5.1 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 2-Measurement of Liquid Hydrocarbons by Displacement Meters - Third Edition | 2005.09.01 | API MPMS 5.2 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 5 - Medición Sección 2 - Medición de Hidrocarburos LÃquidos Mediante Medidores de Desplazamiento - TERCERA EDICIÓN | 2005.09.01 | API MPMS 5.2 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters - Fifth Edition | 2005.09.01 | API MPMS 5.3 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 5-Medición Sección 3-Medición de Hidrocarburos LÃquidos Mediante Medidores de Turbina - QUINTA EDICIÓN | 2005.09.01 | API MPMS 5.3 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 4-Accessory Equipment for Liquid Meters - Fourth Edition | 2005.09.01 | API MPMS 5.4 |
| Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems - Second Edition | 2005.08.01 | API MPMS 5.5 |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 6-Measurement of Liquid Hydrocarbons by Coriolis Meters - First Edition | 2002.10.01 | API MPMS 5.6 |
| Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 7 - Testing Protocol for Differential Pressure Flow Measurement Devices | 2003.01.01 | API MPMS 5.7 |
| Manual of Petroluem Measurement Standards Chapter 5.8 Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters - Second Edition | 2011.11.01 | API MPMS 5.8 |
| Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 2 - Loading-Rack Metering Systems - Third Edition | 2004.02.01 | API MPMS 6.2 |
| Manual of Petroleum Measurement Standards Chapter 6-Metering Assemblies Section 4-Metering Systems for Aviation Fueling Facilities - Second Edition | 2007.01.01 | API MPMS 6.4 |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination - First Edition | 2001.06.01 | API MPMS 7 |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination - First Edition | 2011.10.01 | API MPMS 7 ADD 1 |
| Manual of Petroleum Measurement Standards Chapter 7.3 Temperature Determination-Fixed Automatic Tank Temperature Systems - SECOND EDITION | 2011.10.01 | API MPMS 7.3 |
| Manual de Estándares de Medición de Petróleo CapÃtulo 7.3 Determinación de Temperatura-Sistemas Fijos de Medición Automática de Temperatura en Tanque - SEGUNDA EDICION | 2011.10.01 | API MPMS 7.3 SPANISH |
| Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement - Second Edition | 2004.12.01 | API MPMS 8.4 |
| Manual of Petroleum Measurement Standards Chapter 9.1 - Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method - Third Edition | 2012.12.01 | API MPMS 9.1 |
| Manual of Petroleum Measurement Standards Chapter 9.2 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer- Measurement Coordination - Third Edition | 2012.12.01 | API MPMS 9.2 |
| Manual of Petroleum Measurement Standards Chapter 9.3 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method - Third Edition | 2012.12.01 | API MPMS 9.3 |
| Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) - First Edition | 2010.10.01 | API MPMS TR 2570 |
| 2012 Survey of Occupational Injuries, Illnesses, and Fatalities in the Petroleum Industry Summary Report Aggregate Data Only | 2013.03.01 | API OCCUPATIONAL INJURIES |
| Petroleum Guidelines in Your Community | 2003.10.01 | API PETROLEUM PIPELINES |
| Tool for Incorporating Human Factors During Process Hazard Analysis (PHA) Reviews of Plant Designs | 2004.03.01 | API PHA-1 |
| Developing a Pipeline Supervisory Control Center - Third Edition | 2000.02.01 | API PUBL 1113 |
| Effects of Smooth and Rock Dents on Liquid Petroleum Pipelines (Phase II) - First Edition | 1997.11.01 | API PUBL 1156 |
| Hydrostatic Test Water Treatment and Disposal Options for Liquid Pipeline Systems - First Edition | 1998.10.01 | API PUBL 1157 |
| Analysis of DOT Reportable Incidents for Hazardous Liquid Pipelines, 1986 Through 1996 - First Edition | 1999.01.07 | API PUBL 1158 |
| Guidance Document for the Qualification of Liquid Pipeline Personnel - First Edition | 2000.08.01 | API PUBL 1161 |
| Federally Mandated Training and Information - Third Edition | 1998.01.01 | API PUBL 1200 |
| Electric Curriculums Manager for Federally Mandated Training and Information | 1999.01.01 | API PUBL 1200E |
| Guidelines for Evaluating Vendors and Training Programs | 1998.09.01 | API PUBL 1220 |
| Engine Oil Licensing and Certification System - Fourteenth Edition | 2000.12.29 | API PUBL 1509 ADD |
| Engine Oil Licensing and Certification System - Fourteenth Edition | 2000.10.19 | API PUBL 1509 ADD |
| Engine Oil Licensing and Certification System - Fourteenth Edition | 1998.12.01 | API PUBL 1509 ADD 1 |
| Stage II Vapor Recovery System Operations & | 2002.08.01 | API PUBL 1645 |
| Compilation of Air Emission Estimating Methods for Petroleum Distribution and Dispensing Facilities - Second Edition | 2009.07.01 | API PUBL 1673 |
| Study of Used Motor Oil Recycling in Eleven Selected Countries | 1997.11.01 | API PUBL 1835 |
| Interim Study - Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks - First Edition | 1998.07.01 | API PUBL 2021A |
| Safe Access/Egress Involving Floating Roofs of Storage Tanks in Petroleum Service - Second Edition | 1998.04.01 | API PUBL 2026 |
| Preparing Tank Bottoms for Hot Work - Fifth Edition | 1998.09.01 | API PUBL 2207 |
| Guidelines for Work in Inert Confined Spaces in the Petroleum Industry - Second Edition | 1997.09.01 | API PUBL 2217A |
| Fireproofing Practices in Petroleum and Petrochemical Processing Plants - Second Edition | 1999.08.01 | API PUBL 2218 |
| Inproving Human Performance Systems in the Petroleum Industry | 1999.11.01 | API PUBL 2351 |
| 1996 Summary of U.S. Occupational Injuries, Illnesses, and Fatalities in the Petroleum Industry | 1997.09.01 | API PUBL 2375 |
| 1997 Summary of U.S Occupational Injuries, Illnesses, and Fatalities in the Petroleum Industry | 1998.04.01 | API PUBL 2376 |
| 1998 Summary of U.S. Occupational Injuries, Illnesses and Fatalities in the Petroleum Industry | 1999.04.01 | API PUBL 2377 |
| 1999 Survey on Petroleum Industry Occupational Injuries, Illnesses and Fatalities Summary Report: Aggregate Data Only | 2000.06.01 | API PUBL 2378 |
| 2000 Survey on Petroleum Industry Occupational Injuries, Illnesses, and Fatalities Summary Report: Aggregate Data Only | 2001.04.01 | API PUBL 2379 |
| 2001 Survey on Petroleum Industry Occipational Injuries, Illnesses, and Fatalities summary Report: Aggregate Data Only | 2002.04.01 | API PUBL 2380 |
| See MPMS 15 | 2001.01.01 | API PUBL 2564 |
| State of the Art Multiphase Flow Metering - FIRST EDITION | 2004.08.01 | API PUBL 2565 |
| State of the Art Multiphase Flow Metering - First Edition | 2004.05.01 | API PUBL 2566 |
| Analysis of Refinery Screening Data | 1997.11.01 | API PUBL 310 |
| Summary of Question and Answer Sessions for the American Petroleum Institute's Gasoline Distribution MACT Workshop | 1997.02.01 | API PUBL 338 |
| Management of Residual Materials: 1995 Petroleum Refining Performance | 1997.06.01 | API PUBL 339 |
| Liquid Release Prevention and Detection Measures for Aboveground Storage Facilities | 1997.10.01 | API PUBL 340 |
| Survey of Diked-Area Liner Use at Aboveground Storage Tank Facilities | 1998.02.01 | API PUBL 341 |
| Fugitive Emissions from Equipment Leaks 1: Monitoring Manual | 1998.05.01 | API PUBL 342 |
| Fugitive Emissions from Equipment Leaks II: Calculation Procedures for Petroleum Industry Facilities | 1998.05.01 | API PUBL 343 |
| Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles | 1998.06.01 | API PUBL 344 |
| Management of Residual Materials: 1996 - Petroleum Refining Performance | 1998.06.01 | API PUBL 345 |
| Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines | 1998.11.01 | API PUBL 346 |
| Hazardous Air Pollutant Emissions from Gasoline Loading Operations at Bulk Gasoline Terminals | 1998.10.01 | API PUBL 347 |
| Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Volume 1 Development of Emission Factors Using API/WSPA Approach | 1998.08.01 | API PUBL 348 V1 |
| Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Volume 2 Development of Emission Factors Using API/WSPA Approach | 1997.07.14 | API PUBL 348 V2 |
| Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Volume 3 Development of Emission Factors Using API/WSPA Approach | 1997.07.14 | API PUBL 348 V3 |
| Air Toxics Emission Factors for Combustion Sources Using Petroleum-Based Fuels - Graphical-User-Interface Database and User's Manual Version 2.0.1 | 1998.10.01 | API PUBL 349 |
| Overview of Soil Permeability Test Methods | 1999.04.01 | API PUBL 351 |
| Management of Residual Materials: 1997 Petroleum Refining Performance | 1999.09.01 | API PUBL 352 |
| Managing Systems Integrity of Terminal and Tank Facilities Managing the Risk of Liquid Petroleum Releases - First Edition | 2006.11.01 | API PUBL 353 |
| Assessment of Beached Bird Modeling Methods - PER SDO CURRENTLY NOT AVAILABLE | 2009.08.01 | API PUBL 355 |
| The progress of electronic commerce implementation in the petroleum industry | 1997.01.01 | API PUBL 3875 |
| Alcohols and Ethers a Technical Assessment of Their Application as Fuels and Fuel Components - Third Edition | 2001.06.01 | API PUBL 4261 |
| Hexavalent Chromium Exposures During Hot Work - Second Edition | 2007.06.01 | API PUBL 4629 |
| Petroleum in the Freshwater Environment an Annotated Bibliography 1946 - 1993 - Includes Access to Additional Content | 1997.03.01 | API PUBL 4640 |
| Methodology for Estimating Incremental Benzene Exposures and Risks Associated with Glycol Dehydrators | 1997.02.01 | API PUBL 4644 |
| Methane and Carbon Dioxide Emission Estimates from U.S. Petroleum Sources | 1997.01.01 | API PUBL 4645 |
| Brain Glial Fibrillary Acidic Protein (GFAP) as a Marker of Neurotoxicity During Inhalation Exposure to Toluene | 1997.06.01 | API PUBL 4647 |
| Analysis of High-Mileage-Vehicle Emissions Data from Late-Model, Fuel-Injected Vehicles | 1997.02.01 | API PUBL 4650 |
| International Oil Spill Conference Improving Environmental Protection - Progress, Challenges, Responsibilities - Proceedings | 1997.04.01 | API PUBL 4651 |
| Fugitive Emission Factors for Crude Oil and Product Pipeline Facilities | 1997.06.01 | API PUBL 4653 |
| Field Studies of BTEX and MTBE Intrinsic Bioremediation | 1997.10.01 | API PUBL 4654 |
| Field Evaluation of Biological and Non-Biological Treatment Technologies to Remove MTBE/Oxygenates from Petroleum Product Terminal Wastewaters | 1997.08.01 | API PUBL 4655 |
| Bioaccumulation: How Chemicals Move from the Water into Fish and Other Aquatic Organisms | 1997.05.01 | API PUBL 4656 |
| Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies | 1997.11.01 | API PUBL 4657 |
| Methods for Measuring Indicators of Intrinsic Bioremediation: Guidance Manual | 1997.11.01 | API PUBL 4658 |
| Graphical Approach for Determining Site-Specific Dilution-Attenuation Factors (DAFs) - Technical Background Document and User's Guide | 1998.02.01 | API PUBL 4659 |
| GRAPHICAL APPROACH FOR DETERMINING SITE-SPECIFIC DILUTION-ATTENTUATION FACTORS (DAFS) - TECHNICAL BACKGROUND DOCUMENT | 1998.08.06 | API PUBL 4659 ERTA |
| Production Tank Emissions Model (E& | 1997.10.01 | API PUBL 4660 |
| Exploration and Production Emission Calculator II (EPEC II) User’s Guide - 2nd Edition | 2007.01.01 | API PUBL 4661 |
| Evaluation of a Petroleum Production Tank Emissions Model - Appendices A, B, C, & D- October 1997 | 1997.10.01 | API PUBL 4662 |
| Remediation of Salt-Affected Soils at Oil and Gas Production Facilities - Errata 10/15/98 | 1997.10.01 | API PUBL 4663 |
| Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits | 1998.04.01 | API PUBL 4664 |
| Analysis and Reduction of Toxicity in Biologically Treated Petroleum Product Terminal Tank Bottoms Water | 1998.04.01 | API PUBL 4665 |
| Toxicity of Common Ions to Freshwater and Marine Organisms | 1999.04.01 | API PUBL 4666 |
| Vehicle Emissions Testing of Rapidly Aged Catalysts | 1997.11.01 | API PUBL 4667 |
| Delineation and Characterization of the Borden MTBE Plume: An Evaluation of Eight Years of Natural Attenuation Processes | 1998.06.01 | API PUBL 4668 |
| Selecting Field Analytical Methods a Decision-Tree Approach | 1998.08.01 | API PUBL 4670 |
| Technical Bulletin on Oxygen Releasing Materials for In Situ Groundwater Remediation | 1998.07.01 | API PUBL 4671 |
| The Use of Treatment Wetlands for Petroleum Industry Effluents | 1998.10.01 | API PUBL 4672 |
| Impacts of Petroleum Product Marketing Terminals on the Aquatic Environment | 1999.04.01 | API PUBL 4673 |
| Assessing the Significance of Subsurface Contaminant Vapor Migration to Enclosed Spaces Site-Specific Alternatives to Generic Estimates | 1998.12.01 | API PUBL 4674 |
| Fate and Environmental Effects of Oil Spills in Freshwater Environments | 1999.12.01 | API PUBL 4675 |
| Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options | 1998.10.01 | API PUBL 4676 |
| Fugitive Emissions from Refinery Process Drains Volume I | 1999.04.01 | API PUBL 4677 |
| Fugitive Emissions from Refinery Process Drains Volume II | 1999.04.01 | API PUBL 4678 |
| Amine Unit Emissions Model AMINECalc Version 1.0 - Errata June 16, 1999 | 1999.01.01 | API PUBL 4679 |
| Amine Unit Air Emissions Model Evaluation | 1998.12.01 | API PUBL 4680 |
| Fugitive Emissions from Refinery Process Drains Volume III, Process Drain Emission Calculator: APIDRAIN Version 1.0 - Includes Access to Additional Content | 1999.04.01 | API PUBL 4681 |
| Free-Product Recovery of Petrolem Hydrocarbon Liquids | 1999.06.01 | API PUBL 4682 |
| Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities | 1998.11.01 | API PUBL 4683 |
| Compilation and Review of Data on the Environmental Effects of In Situ Burning of Inland and Upland Oil Spills | 1999.03.01 | API PUBL 4684 |
| 1999 Oil Spill Conference Proceedings | 1999.03.01 | API PUBL 4686 |
| 1999 Internatiional Oil Spill Conference Issue Papers: Myths and Realities of Oil Spill Planning and Response: The Challenges of a Large Spill | 1999.01.01 | API PUBL 4687 |
| Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters | 1999.11.01 | API PUBL 4688 |
| Chemical Human Health Hazards Associated with Oil Spill Response | 2001.08.01 | API PUBL 4689 |
| Guide for the Use of Semipermeable Membrane Devices (SPMDs) as Samplers of Waterborne Hyhrophobic Organic Contaminats | 2002.03.01 | API PUBL 4690 |
| Fate of Spilled Oil in Marine Waters: Where Does It Go? What Does It Do? How Do Dispersants Affect It? | 1999.03.01 | API PUBL 4691 |
| A Decision-Maker's Guide to Dispersants: A Review of the Theory and Operational Requirements | 1999.03.01 | API PUBL 4692 |
| Effects of Oil and Chemically Dispersed Oil in the Environment | 2001.05.01 | API PUBL 4693 |
| Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports | 1999.12.01 | API PUBL 4694 |
| Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits | 1999.12.01 | API PUBL 4695 |
| Production Tank Emissions Model - A Program for Estimating Emissions from Hydrocarbon Production Tanks - E& | 2000.04.01 | API PUBL 4697 |
| A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations | 1999.11.01 | API PUBL 4698 |
| Primer for Evaluating Ecological Risk at Petroleum Release Sites | 2001.05.01 | API PUBL 4700 |
| Bioaccumulation: An Evaluation of Federal and State Regulatory Initiatives | 2000.05.01 | API PUBL 4701 |
| Technologies to Reduce Oil and Grease Content of Well Treatment, Well Completion, and Workover Fluids for Overboard Disposal | 2001.03.01 | API PUBL 4702 |
| Gas Fired Boiler - Test Report Refinery Site A Characterization of Fine Particulate Emission Factor and Specification Profiles from Stationary Petroleum Industry Combustion Sources | 2001.07.01 | API PUBL 4703 |
| Gas Fired Heater - Test Report Site B Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources | 2001.08.01 | API PUBL 4704 |
| Environmental Considerations for Marine Oil Spill Response | 2001.07.01 | API PUBL 4706 |
| Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil and Natural Gas E& | 2001.02.01 | API PUBL 4709 |
| Oil Spill Conference Proceedings | 2003.01.01 | API PUBL 4710 CD |
| Methods for Determining Inputs to Environmental Petroleum Hydrocarbon Mobility and Recovery Models | 2001.07.01 | API PUBL 4711 |
| Gas-Fired Steam Generator - Test Reprot Site C: Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources | 2001.07.01 | API PUBL 4712 |
| Test Report: Fluidized Catalytic Cracking Unit at a Refinery (Site A) | 2002.03.01 | API PUBL 4713 |
| A Guide to Polycyclic Aromatic Hydrocarbons for the Non-Specialists | 2002.02.01 | API PUBL 4714 |
| Buried Pressurized Piping Systems Leak Detection Guide | 2002.04.01 | API PUBL 4716 |
| Predictors of Water-Soluble Organics (WS0s) in Produced Water - A Literature Review | 2002.03.01 | API PUBL 4717 |
| Oil Spill Conference Proceedings | 2005.01.01 | API PUBL 4718 CD |
| Comparison of API and EPA Toxic Air Pollutant Emission Factors for Combustion Sources | 2002.09.01 | API PUBL 4720 |
| Analytical Detection and Qualification Limits: Survey of State and Federal Approaches | 2002.06.01 | API PUBL 4721 |
| Groundwater Sensitivity Toolkit - Includes Access to Additional Content | 2002.08.01 | API PUBL 4722 |
| Refinery Stream Speciation | 2002.11.01 | API PUBL 4723 |
| Models for Design of Free-Product Recovery Systems for Petroleum Hydrocarbon Liquids | 2003.08.01 | API PUBL 4729 |
| Groundwater Remediation Strategies Tool | 2003.12.01 | API PUBL 4730 |
| Light Non-Aqueous Phase Liquid (LNAPL) Parameters Database - Version 2.0 - User Guide - Includes Access to Additional Content | 2003.12.01 | API PUBL 4731 |
| Risk-Based Screening Levels for the Protection of Livestock Exposed to Petroleum Hydrocarbons | 2004.07.01 | API PUBL 4733 |
| Modeling Study of Produced Water Release Scenarios | 2005.01.01 | API PUBL 4734 |
| Identification of Key Assumptions and Models for the Development of Total Maximum Daily Loads - First Edition | 2006.11.01 | API PUBL 4736 |
| Collecting and Interpreting Soil Gas Samples from the Vadose Zone A Practical Strategy for Assessing the Subsurface Vapor-to-Indoor Air Migration Pathway at Petroleum Hydrocarbon Sites | 2005.11.01 | API PUBL 4741 |
| Hazard Narrative for Tertiary-Butyl Alcohol (TBA) CAS Number 75–65–0 | 2005.10.01 | API PUBL 4743 |
| Cyanide Discharges in the Petroleum Industry: Sources and Analysis | 2008.11.01 | API PUBL 4750 |
| Evaluation of Water Quality Translators for Mercury | 2005.12.01 | API PUBL 4751 |
| Interim Permitting Manual Navigating NPDES Permit Issues on Impaired Waters | 2006.11.01 | API PUBL 4756 |
| Strategies for Addressing Salt Impacts of Produced Water Releases to Plants, Soil, and Groundwater | 2006.09.01 | API PUBL 4758 |
| API Groundwater Arsenic Manual Attenuation of Naturally-Occurring Arsenic at Petroleum Impacted Sites | 2011.02.01 | API PUBL 4761 |
| Measuring Particulate Emissions from Combustion Sources | 2008.09.01 | API PUBL 4772 |
| Simulating the Effect of Aerobic Biodegradation on Soil Vapor Intrusion into Buildings Evaluation of Low Strength Sources Associated with Dissolved Gasoline Plumes | 2009.04.01 | API PUBL 4775 |
| A Guide to Understanding, Assessment, and Regulation of PAHs in the Aquatic Environment | 2011.09.01 | API PUBL 4776 |
| Technical Protocol for Evaluating the Natural Attenuation of MtBE | 2007.05.01 | API PUBL 4779 |
| Risk-Based Inspection Base Resource Document - First Edition | 2000.05.01 | API PUBL 581 |
| Base Resource Document on Risk-Based Inspection | 2000.01.01 | API PUBL 581 CD |
| National Survey on Naturally Occurring Radioactive Material (NORM) in Petroleum Production and Gas Processing Facilities | 1997.11.01 | API PUBL 7101 |
| Methods for Measuring Naturally Occurring Radioactive Materials (NORM) in Petroleum Production Equipment | 1997.11.01 | API PUBL 7102 |
| Management and Disposal Alternatives for Naturally Occurring Radioactive Material (NORM) Wastes in Oil Production and Gas Plant Equipment | 1997.11.01 | API PUBL 7103 |
| Proceedings of the 1995 API and GRI Naturally Occurring Radioactive Material (NORM) Conference | 1997.11.01 | API PUBL 7104 |
| Probabilistic Estimates of Dose and Indoor Radon Concentrations Attributable to Remediated Oilfield Naturally Occuring Radioactive Material (NORM) | 1997.11.01 | API PUBL 7105 |
| Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA's RMP Rule (40 Code of Federal Regulations, Part 68) - Third Edition | 2001.02.01 | API PUBL 760 |
| Model Risk Management Plan Guidance for Petroleum Refineries - Third Edition | 2001.02.01 | API PUBL 760 COMBO |
| Model Risk Management Plan Guidance for Exploration and Production (E& | 2001.02.01 | API PUBL 761 |
| Manager's Guide to Reducing Human Errors Improving Human Performance in the Process Industries | 2001.03.01 | API PUBL 770 |
| API Standards 620, 650, and 653 Interpretations - Tank Construction and In-Service Inspection - Answers to Technical Inquiries | 1997.11.01 | API PUBL 850 |
| Digest of State Boiler, Pressure Vessel, Piping and Aboveground Storage Tank Rules and Regulations - Eighth Edition | 1997.11.01 | API PUBL 910 |
| Model Envirnomental, Health and Safety (EHS) Management System and Guidance Document - Includes PUBL 9100A, PUBL 9100B, and Binder | 1998.10.01 | API PUBL 9100 |
| Model Environment, Health & | 1998.10.01 | API PUBL 9100A |
| Guidance Document for Model EHS Management System A Manual to Assist Companies Interested in Developing an EHS Management System or Enhancing an Existing System | 1998.10.01 | API PUBL 9100B |
| A Study of Corrosion in Hydroprocess Reactor Effluent Air Cooler Systems | 2002.09.01 | API PUBL 932-A |
| Thermal Conductivity Measurement Study of Refractory Castables - First Edition | 1999.09.01 | API PUBL 935 |
| Study to Establish Relations for the Relative Strength of API 650 Cone Roof Roof-to-Shell and Shell-to-Bottom Joints | 2005.08.01 | API PUBL 937-A |
| Repair and Remediation Strategies for Equipment Operating in Wet H2S Service | 2002.06.01 | API PUBL 939-B |
| Pilot Studies on Activated Carbon Enhancement of the Refinery Activated Sludge Process-Phase ll | 1998.10.01 | API PUBL 957 |
| Technical Data Book Petroleum Refining - SIXTH EDITION | 1997.04.01 | API PUBL 999 |
| Purchasing Guidelines Handbook - Update 9/18/2004 | 2004.01.01 | API PURCHASING GUIDELINES |
| QUARTERLY WELL COMPLETION REPORT - Volume 29 Number 1 | 2013.04.01 | API QUARTERLY WELL |
| Strength of Simple Joints - Effect of Chord Stress and Diameter-to-Thickness Ratio on the Static Strength of DT Tubular Joints Loaded in Brace Compression | 1998.05.28 | API REPORT 07714-CAP |
| Report of Eastern and Western Hemisphere Production of Casing, Tubing and Drill Pipe | 2004.01.01 | API REPORT OF CASING |
| Report of Eastern and Western Hemisphere Production of Line Pipe | 2004.01.01 | API REPORT OF LINE PIPE |
| Report of Eastern Hemisphere Production of Line Pipe | 2000.01.01 | API REPORT OF LINE PIPE - EAST |
| Report of Western Hemisphere Production of Line Pipe | 1999.01.01 | API REPORT OF LINE PIPE - WEST |
| Report of Western Hemisphere Production of Line Pipe | 2000.01.01 | API RLP WE 2000 |
| Bottom Loading and Vapor Recovery for MC-306 & | 2003.01.01 | API RP 1004 |
| Loading and Unloading of MC 306/DOT 406 Cargo Tank Motor Vehicles - First Edition | 2001.03.01 | API RP 1007 |
| Recommended Practice for Testing Well Cements - Twenty-Second Edition | 1997.12.01 | API RP 10B |
| Recommended Practice for Testing Well Cements - Second Edition | 2013.04.01 | API RP 10B-2 |
| Recommended Practice on Testing of Deepwater Well Cement Formulations - First Edition | 2004.07.01 | API RP 10B-3 |
| Recommended Practice on Preparation and Testing of Foamed Cement Slurries at Atmospheric Pressure - First Edition | 2004.07.01 | API RP 10B-4 |
| Recommended Practice on Determination of Shrinkage and Expansion of Well Cement Formulations at Atmospheric Pressure - First Edition | 2005.04.01 | API RP 10B-5 |
| Recommended Practice on Determining the Static Gel Strength of Cement Formulations - First Edition | 2010.08.01 | API RP 10B-6 |
| Recommended Practice for Centralizer Placement and Stop Collar Testing - First Edition | 2004.08.01 | API RP 10D-2 |
| Recommended Practice for Performance Testing of Cementing Float Equipment - Third Edition | 2002.04.01 | API RP 10F |
| Steel Pipelines Crossing Railroads and Highways - SEVENTH EDITION | 2007.12.01 | API RP 1102 |
| Marking Liquid Petroleum Pipeline Facilities - Fourth Edition | 2010.10.01 | API RP 1109 |
| Recommended Practice for the Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide - Sixth edition | 2013.02.01 | API RP 1110 |
| Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) - Fourth Edition | 2009.12.01 | API RP 1111 |
| Developing a Highway Emergency Response Plan for Incidents Involving Hazardous Materials - Third Edition | 1997.11.01 | API RP 1112 |
| Developing a Pipeline Supervisory Control Center - First Edition | 2007.08.01 | API RP 1113 |
| Recommended Practice for the Design of Solution-Mined Underground Storage Facilities - Second Edition | 2013.01.01 | API RP 1114 |
| Recommended Practice for Movement in In-service Pipelines - THIRD EDITION | 2008.07.01 | API RP 1117 |
| Computational Pipeline Monitoring for Liquids - First Edition | 2007.09.01 | API RP 1130 |
| Guidelines for Onshore Hydrocarbon Pipelines Affecting High Consequence Floodplains - First Edition | 2005.02.01 | API RP 1133 |
| Recommended Practice for Pipeline Operator Qualification (OQ) - Second Edition | 2012.04.01 | API RP 1161 |
| Public Awareness Programs for Pipeline Operators - Second Edition | 2010.12.01 | API RP 1162 |
| Recommended Practice for Pipeline SCADA Displays - First Edition | 2007.01.01 | API RP 1165 |
| Excavation Monitoring and Observation - First Edition | 2005.11.01 | API RP 1166 |
| Pipeline SCADA Alarm Management - First Edition | 2010.12.01 | API RP 1167 |
| Pipeline Control Room Management - First Edition | 2008.09.01 | API RP 1168 |
| Recommended Practice for Care and Use of Subsurface Pumps - Fourth Edition | 2000.06.01 | API RP 11AR |
| Recommended Practice for the Care and Handling of Sucker Rods - Ninth Edition | 2008.08.01 | API RP 11BR |
| Recommended Practice for Guarding of Pumping Units - Third Edition | 2009.11.01 | API RP 11ER |
| Design Calculations Conventional Socker Rod Pumping Systems | 2000.01.01 | API RP 11L1 |
| Recommended Practice for Electrical Submersible Pump Teardown Report - Third Edition | 1997.09.01 | API RP 11S1 |
| Recommended Practice for Electric Submersible Pump Testing - Second Edition | 1997.08.01 | API RP 11S2 |
| Recommended Practice for Electric Submersible Pump Testing - Second Edition | 1997.08.01 | API RP 11S2 RUSSIAN |
| Recommended Practice for Electrical Submersible Pump Installations - Second Edition | 1999.03.01 | API RP 11S3 |
| Recommended Practice for Sizing and Selection of Electric Submersible Pump Installations - Third Edition | 2002.07.01 | API RP 11S4 |
| Recommended Practice for the Application of Electrical Submersible Cable Systems - SECOND EDITION | 2008.04.01 | API RP 11S5 |
| Recommended Practice on Electric Submersible System Vibrations - Second Edition | 2012.10.01 | API RP 11S8 |
| Recommended Practices for Design and Operation of Intermittent and Chamber Gas-lift Wells and Systems - First Edition | 2008.06.01 | API RP 11V10 |
| Gas-lift Valve Performance Testing - SECOND EDITION | 2001.03.01 | API RP 11V2 |
| Recommended Practices for Operation, Maintenance, Surveillance, and Troubleshooting of Gas-lift Installations - THIRD EDITION | 2008.06.01 | API RP 11V5 |
| Recommended Practice for Design of Continous Flow Gas Lift Installations Using Injection Pressure Operated Valves - Second Edition | 1999.07.01 | API RP 11V6 |
| Recommended Practice for Repair, Testing, and Setting Gas Lift Valves - Second Edition | 1999.06.01 | API RP 11V7 |
| Recommended Practice for Gas Lift System Design and Performance Prediction - First Edition | 2003.09.01 | API RP 11V8 |
| Recommended Practice for Setting, Maintenance, Inspection, Operation, and Repair of Tanks in Production Service - Fifth Edition | 1997.08.01 | API RP 12R1 |
| Recommended Practice for Field Testing Water-based Drilling Fluids - FOURTH EDITION | 2009.03.01 | API RP 13B-1 |
| Recommended Practice for Field Testing Oil-Based Drilling Fluids - Fourth Edition | 2005.03.01 | API RP 13B-2 |
| Recommended Practice on Drilling Fluids Processing Systems Evaluation - Fourth Edition | 2010.12.01 | API RP 13C |
| Rheology and Hydraulics of Oil-well Drilling Fluids - Sixth Edition | 2010.05.01 | API RP 13D |
| RHEOLOGY AND HYDRAULICS OF OIL-WELL FLUIDS - Sixth Edition | 2010.05.01 | API RP 13D RUSSIAN |
| Recommended Practice for Laboratory Testing of Drilling Fluids - EIGHTH EDITION | 2009.03.01 | API RP 13I |
| Testing of Heavy Brines - Fourth Edition | 2006.05.01 | API RP 13J |
| Recommended Practice for Chemical Analysis of Barite - Third Edition | 2011.05.01 | API RP 13K |
| RECOMMENDED PRACTICE FOR CHEMICAL ANALYSIS OF BARITE - Third Edition | 2011.05.01 | API RP 13K RUSSIAN |
| Recommended Practice for Training and Qualification of Drilling Fluid Technologists - First Edition | 2003.02.01 | API RP 13L |
| Recommended Practice for the Measurement of Viscous Properties of Completion Fluids - First Edition | 2004.07.01 | API RP 13M |
| Recommended Practice for Measuring Stimulation and Gravel-pack Fluid Leakoff Under Static Conditions - First Edition | 2006.12.01 | API RP 13M-4 |
| Petroleum and natural gas industriesSubsurface safety valve systemsDesign, installation, operation and redress - Fifth Edition | 2005.10.01 | API RP 14B |
| Design, Installation, Repair and Operation of Subsurface Safety Valve Systems - Fifth Edition | 2010.11.09 | API RP 14B ERTA |
| Design, Installation, Repair and Operation of Subsurface Safety Valve Systems - Fifth Edition | 2005.10.01 | API RP 14B RUSSIAN |
| Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms - Seventh Edition | 2001.03.01 | API RP 14C |
| Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations - Fifth Edition | 2008.07.01 | API RP 14F |
| Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations - Second Edition | 2013.05.01 | API RP 14FZ |
| Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms - Fourth Edition | 2007.04.01 | API RP 14G |
| Recommended Practice for Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore - Fifth Edition | 2007.08.01 | API RP 14H |
| Recommended Practice for Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore - Fifth Edition | 2007.08.01 | API RP 14H RUSSIAN |
| Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities - Second Edition | 2001.05.01 | API RP 14J |
| Bulk Oil Testing, Handling, and Storage Guidelines - First Edition | 1997.06.01 | API RP 1525 |
| Documentation, Monitoring and Laboratory Testing of Aviation Fuel During Shipment from Refinery to Airport - First Edition | 2009.07.01 | API RP 1543 |
| Design, Construction, Operation, Maintenance, and Inspection of Aviation Pre-Airfield Storage Terminals - SECOND EDITION | 2012.10.01 | API RP 1595 |
| Recommended Practice for Composite Lined Steel Tubular Goods - 1st Edition | 2007.09.01 | API RP 15CLT |
| Qualification of Spoolable Reinforced Plastic Line Pipe - First Edition | 2006.03.01 | API RP 15S |
| Recommended Practice for Care and Use of Fiberglass Tubulars - Second Edition | 1999.03.01 | API RP 15TL4 |
| Installation of Underground Petroleum Storage Systems - Sixth Edition | 2011.04.01 | API RP 1615 |
| Storing and Handling Ethanol and Gasoline-ethanol Blends at Distribution Terminals and Filling Stations - Second Edition | 2010.08.01 | API RP 1626 |
| Interior Lining of Underground Storage Tanks - Fourth Edition | 1997.10.01 | API RP 1631 |
| Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals - Third Edition | 2006.07.01 | API RP 1637 |
| Owner/Operator’s Guide to Operation and Maintenance of Vapor Recovery Systems at Gasoline Dispensing Facilities - First Edition | 2003.07.01 | API RP 1639 |
| Coiled Tubing Well Control Equipment Systems - First Edition | 2009.03.01 | API RP 16ST |
| Design and Operation of Subsea Production Systems - General Requirements and Recommendations - Fourth Edition | 2006.01.01 | API RP 17A |
| Design and Operation of Subsea Production Systems-General Requirements and Recommendations - Fourth Edition | 2010.12.01 | API RP 17A ADD 1 |
| Recommended Practice for Flexible Pipe - Fourth Edition | 2008.07.01 | API RP 17B |
| Recommended Practice on TFL (Through Flowline) Systems - Second Edition | 2002.09.01 | API RP 17C |
| Recommended Practice for Completion/Workover Risers - Second Edition | 2006.07.01 | API RP 17G |
| Remotely Operated Vehicle Interfaces on Subsea Production Systems - Second Edition | 2013.06.01 | API RP 17H |
| Specification for Flexible Pipe Ancillary Equipment - First Edition | 2013.03.01 | API RP 17L2 |
| Recommended Practice on Remotely Operated Tool (ROT) Intervention Systems - First Edition | 2004.04.01 | API RP 17M |
| Recommended Practice for Subsea Production System Reliability and Technical Risk Management - Fisrt Edition | 2009.03.01 | API RP 17N |
| Recommended Practice for Subsea High Integrity Pressure Protection Systems (HIPPS) - First Edition | 2009.10.01 | API RP 17O |
| Design and Operation of Subsea Production Systems - Subsea Structures and Manifolds - First Edition | 2013.01.01 | API RP 17P |
| Subsea Equipment Qualification - Standardized Process for Documentation - First Edition | 2010.06.01 | API RP 17Q |
| Subsea Equipment Qualification – Standardized Process for Documentation – G17Q01D (EXCEL 5.0 SPREADSHEETS) - First Edition | 2010.06.01 | API RP 17Q DATA SHEET |
| Recommended Practices for Evaluation of Well Perforators - SECOND EDITION | 2006.09.01 | API RP 19B |
| Recommended Practices for Evaluation of Well Perforators - SECOND EDITION | 2006.09.01 | API RP 19B CHINESE |
| RECOMMENDED PRACTICES FOR EVALUATION OF WELL PERFORATORS - SECOND EDITION | 2006.09.01 | API RP 19B RUSSIAN |
| Part 2: Measurement of Properties of Proppants Used in Hydraulic Fracturing and Gravel-packing Operations - First Edition | 2008.05.01 | API RP 19C |
| Measuring the Long-term Conductivity of Proppants - First Edition | 2008.05.01 | API RP 19D |
| Practices for Side-pocket Mandrels and Related Equipment - FIRST EDITION | 2011.06.01 | API RP 19G4 |
| Design, Operation, and Troubleshooting of Dual Gas-lift Wells - First Edition | 2010.02.01 | API RP 19G9 |
| Fire Protection in Refineries - Ninth Edition | 2012.04.01 | API RP 2001 |
| Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents - Seventh Edition | 2008.01.01 | API RP 2003 |
| Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries - Seventh Edition | 2002.02.01 | API RP 2009 |
| Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks - First Edition | 2001.08.01 | API RP 2016 |
| Management of Atmospheric Storage Tank Fires - Fourth Edition | 2001.05.01 | API RP 2021 |
| Guide for Safe Storage and Handling of Heated Petroleum-Derived Asphalt Products and Crude-Oil Residua - THIRD EDITION | 2001.08.01 | API RP 2023 |
| Guide for Safe Storage and Handling of Heated Petroleum-Derived Asphalt Products and Crude-Oil Residua | 2001.08.01 | API RP 2023 |
| Ignition Hazards and Safe Work Practices for Abrasive Blasting of Atmospheric Storage Tanks in Hydrocarbon Service - Third Edition | 2002.03.01 | API RP 2027 |
| Flame Arresters in Piping Systems - Third Edition | 2002.02.01 | API RP 2028 |
| Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries - Third Edition | 2005.07.01 | API RP 2030 |
| Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines - Fourth Edition | 2010.09.01 | API RP 2200 |
| Safe Hot Tapping Practices in the Petroleum & | 2003.07.01 | API RP 2201 |
| Preparing Tank Bottoms for Hot Work - Sixth Edition | 2007.12.01 | API RP 2207 |
| Flame Arresters for Vents of Tanks Storing Petroleum Products - Third Edition | 2000.05.01 | API RP 2210 |
| Spark Ignition Properties of Hand Tools - Fourth Edition | 2004.07.01 | API RP 2214 |
| Ignition Risk of Hydrocarbon Liquids and Vapors by Hot Surfaces in the Open Air - Third Edition | 2003.12.01 | API RP 2216 |
| Safe Operation of Vacuum Trucks in Petroleum Service - Third Edition | 2005.11.01 | API RP 2219 |
| Contractor and Owner Safety Program Implementation - Third Edition | 2011.10.01 | API RP 2221 |
| Overfill Protection for Storage Tanks in Petroleum Facilities - Third Edition | 2005.01.01 | API RP 2350 |
| Terminal Piping Inspection- Inspection of In-Service Terminal Piping Systems - First Edition | 2011.06.01 | API RP 2611 |
| Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design - Twenty-First Edition | 2000.12.01 | API RP 2A-WSD |
| Operation and Maintenance of Offshore Cranes - Sixth Edition | 2007.05.01 | API RP 2D |
| OPERATION AND MAINTENANCE OF OFFSHORE CRANES - Sixth Edition | 2007.05.01 | API RP 2D KAZAKH |
| OPERATION AND MAINTENANCE OF OFFSHORE CRANES - Sixth Edition | 2007.05.01 | API RP 2D RUSSIAN |
| Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading - First Edition | 2006.04.01 | API RP 2FB |
| Planning, Designing, and Constructing Floating Production Systems - SECOND EDITION | 2011.10.01 | API RP 2FPS |
| Geotechnical and Foundation Design Considerations - First Edition | 2011.04.01 | API RP 2GEO |
| In-service Inspection of Mooring Hardware for Floating Structures - THIRD EDITION | 2008.04.01 | API RP 2I |
| Marine Operations - FIRST EDITION | 2010.07.01 | API RP 2MOP |
| Design of Risers for Floating Production Systems (FPSs) and Tension-Leg Platforms (TLPs) - First Edition | 1998.06.01 | API RP 2RD |
| Design and Analysis of Stationkeeping Systems for Floating Structures - Third Edition | 2005.10.01 | API RP 2SK |
| Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring - First Edition | 2001.03.01 | API RP 2SM |
| Planning, Designing, and Constructing Tension Leg Platforms - Third Edition | 2010.07.01 | API RP 2T |
| Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians - Fourth Edition | 2004.04.01 | API RP 2X |
| Recommended Practice for Preproduction Qualification for Steel Plates for Offshore Structures - Fourth Edition | 2005.09.01 | API RP 2Z |
| Standard Form for Hardcopy Presentation of Downhole Well Log Data - First Edition | 1997.08.01 | API RP 31A |
| Recommended Practices on Measuring the Viscous Properties of a Cross-Linked Water-Based Fracturing Fluid - Third Edition | 1998.05.01 | API RP 39 |
| Recommended Practices for Core Analysis - Second Edition | 1998.02.01 | API RP 40 |
| Sampling Petroleum Reservoir Fluids - Second Edition | 2003.04.01 | API RP 44 |
| Recommended Practice for Analysis of Oilfield Waters - Third Edition | 1998.08.01 | API RP 45 |
| Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide - Third Edition | 2001.05.01 | API RP 49 |
| Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide - Third Edition: Incorporates Amendment 1: 2007 | 2001.05.01 | API RP 49 KAZAKH |
| RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE - Third Edition: Incorporates Amentment 1: 2007 | 2001.05.01 | API RP 49 RUSSIAN |
| Operation, Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures - Fourth Edition | 2012.04.01 | API RP 4G |
| Use and Procedures for Inspection, Maintenance, and Repair of Drilling and Well Servicing Structures – Mechanical Equipment Data Sheet - Third Edition | 2004.01.01 | API RP 4G DATA SHEET |
| Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 - Third Edition | 2012.12.01 | API RP 500 |
| RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, DIVISION 1 AND DIVISION 2 - Second Edition | 1997.11.01 | API RP 500 RUSSIAN |
| Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 - First Edition | 1997.11.01 | API RP 505 |
| Onshore Oil and Gas Production Practices for Protection of the Environment - Third Edition | 2001.02.01 | API RP 51 |
| Environmental Protection for Onshore Oil and Gas Production Operations and Leases - First Edition | 2009.07.01 | API RP 51R |
| Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries | 2000.01.01 | API RP 520 PT I |
| Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II-Installation - Fifth Edition | 2003.08.01 | API RP 520 PT II |
| Guide for Pressure-Relieving and Depressuring Systems - Fourth Edition | 1997.03.01 | API RP 521 |
| Guide for Pressure-Relieving and Depressuring Systems - Fourth Edition | 1999.02.15 | API RP 521 ERTA |
| Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells - Third Edition | 1997.03.01 | API RP 53 |
| RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS - Third Edition | 1997.03.01 | API RP 53 KAZAKH |
| RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS - Third Edition | 1997.03.01 | API RP 53 RUSSIAN |
| Heat Recovery Steam Generators - Second Edition | 2007.02.01 | API RP 534 |
| Burners for Fired Heaters in General Refinery Services - Second Edition | 2006.01.01 | API RP 535 |
| Burners for Fired Heaters in General Refinery Servies - Second Edition | 2006.01.01 | API RP 535 RUSSIAN |
| Post-Combustion NOx Control for Fired Equipment in General Refinery Services - Second Edition | 2006.12.01 | API RP 536 |
| Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations - Third Edition | 1999.08.01 | API RP 54 |
| Electrical Installations in Petroleum Processing Plants - Fourth Edition | 1999.04.01 | API RP 540 |
| Recommended Practice for Lightning Protection of Aboveground Storage Tanks for Flammable or Combustible Liquids - First Edition | 2009.10.01 | API RP 545 |
| Refinery Valves and Accessories for Control and Safety Instrumented Systems - Second Edition | 2012.10.01 | API RP 553 |
| Process Control Systems Part 1-Process Control Systems Functions and Functional Specification Development - SECOND EDITION | 2007.07.01 | API RP 554 PART 1 |
| Process Control Systems Part 1-Process Control Systems Functions and Functional Specification Development - Second Edition | 2007.07.01 | API RP 554 PART 1 RUSSIAN |
| Process Control Systems- Process Control System Design - First Edition | 2008.10.01 | API RP 554 PART 2 |
| Process Control Systems- Process Control System Design - First Edition | 2008.10.01 | API RP 554 PART 2 RUSSIAN |
| Process Control Systems- Project Execution and Process Control System Ownership - First Edition | 2008.10.01 | API RP 554 PART 3 |
| Process Analyzers - Third Edition | 2013.06.01 | API RP 555 |
| Instrumentation, Control, and Protective Systems for Gas Fired Heaters - Second Edition | 2011.04.01 | API RP 556 |
| Instrumentation, Control, and Protective Systems for Gas Fired Heaters - Second Edition | 2011.04.01 | API RP 556 RUSSIAN |
| Guide to Advanced Control Systems - First Edition | 2000.12.01 | API RP 557 |
| Damage Mechanisms Affecting Fixed Equipment in the Refining Industry - Second Edition | 2011.04.01 | API RP 571 |
| Damage Mechanisms Affecting Fixed Equipment in the Refining Industry - First Edition | 2003.12.01 | API RP 571 CHINESE |
| Mécanismes d'endommagement affectant les équipements statiques dans l'Industrie du raffinage - Premiere Edition | 2003.12.01 | API RP 571 FRENCH |
| Damage Mechanisms Affecting Fixed Equipment in the Refining Industry - First Edition | 2003.12.01 | API RP 571 GERMAN |
| Inspection Practices for Pressure Vessels - Third Edition | 2009.11.01 | API RP 572 |
| Inspection Practices for Pressure Vessels - Third Edition | 2009.11.01 | API RP 572 CHINESE |
| Inspection of Fired Boilers and Heaters - Second Edition | 2003.02.01 | API RP 573 |
| Inspection Practices for Piping System Components - Third Edition | 2009.11.01 | API RP 574 |
| Inspection Practices for Piping System Components - Third Edition | 2009.11.01 | API RP 574 CHINESE |
| Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks - Second Edition | 2005.05.01 | API RP 575 |
| Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks - Second Edition | 2005.05.01 | API RP 575 CHINESE |
| Inspection of Pressure-Relieving Devices - Third Edition | 2009.11.01 | API RP 576 |
| Inspection of Pressure-Relieving Devices - Third Edition | 2009.11.01 | API RP 576 CHINESE |
| Welding Inspection and Metallurgy - First Edition | 2004.10.01 | API RP 577 |
| Welding Inspection and Metallurgy - First Edition | 2004.10.01 | API RP 577 CHINESE |
| Material Verification Program for New and Existing Alloy Piping Systems - Second Edition | 2010.03.01 | API RP 578 |
| Material Verification Program for New and Existing Alloy Piping Systems - Second Edition | 2010.03.01 | API RP 578 CHINESE |
| Material Verification Program for New and Existing Alloy Piping Systems - Second Edition | 2010.03.01 | API RP 578 RUSSIAN |
| Risk-Based Inspection - Second Edition | 2009.11.01 | API RP 580 |
| Risk-Based Inspection Technology - Second Edition | 2008.09.01 | API RP 581 |
| Welding Guidelines for the Chemical, Oil, and Gas Industries - Second Edition | 2009.12.01 | API RP 582 |
| Welding Guidelines for the Chemical, Oil, and Gas Industries - Second Edition | 2009.12.01 | API RP 582 RUSSIAN |
| Corrosion Under Insulation and Fireproofing - First Edition | 2012.01.01 | API RP 583 |
| Integrity Operating Windows - First Edition | 2012.01.01 | API RP 584 |
| Recommended Practice for Well Control Operations - Second Edition | 2006.05.01 | API RP 59 |
| RECOMMENDED PRACTICE FOR WELL CONTROL OPERATIONS - Second Edition | 2006.05.01 | API RP 59 KAZAKH |
| Recommended Practice for Well Control Operations - Second Edition | 2006.05.01 | API RP 59 RUSSIAN |
| Process Valve Qualification Procedure - FOURTH EDITION | 2008.12.01 | API RP 591 |
| Process Valve Qualification Procedure - Fourth Edition | 2008.12.01 | API RP 591 RUSSIAN |
| Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem Elements - Third Edition | 2009.11.01 | API RP 5A3 |
| Field Inspection of New Casing, Tubing, and Plain-end Drill Pipe - Seventh Edition | 2005.06.01 | API RP 5A5 |
| Gauging and Inspection of Casing, Tubing, and Line Pipe Threads - Fifth Edition | 1999.10.01 | API RP 5B1 |
| Gauging and Inspection of Casing, Tubing, and Line Pipe Threads - Fifth Edition | 2004.09.01 | API RP 5B1 ADD 1 |
| GAUGING AND INSPECTION OF CASING, TUBING, AND LINE PIPE THREADS - Fifth Edition | 1999.10.01 | API RP 5B1 RUSSIAN |
| Recommended Practice for Care and Use of Casing and Tubing - Eighteenth Edition | 1999.05.01 | API RP 5C1 |
| Recommended Practice on Procedures for Testing Casing and Tubing Connections - Third Edition | 2003.07.01 | API RP 5C5 |
| Welding Connections to Pipe - Second Edition | 2006.03.01 | API RP 5C6 |
| Recommended Practice for Railroad Transportation of Line Pipe - Seventh Edition | 2009.09.01 | API RP 5L1 |
| Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service - Fourth Edition | 2002.07.01 | API RP 5L2 |
| Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service - Fourth Edition | 2002.07.01 | API RP 5L2 KAZAKH |
| Recommended Practice for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission Service - Fourth Edition | 2012.10.11 | API RP 5L2 RUSSIAN |
| Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe - Second Edition | 1998.06.01 | API RP 5L7 KAZAKH |
| External Fusion Bounded Epoxy Coating of Line Pipe - First Edition | 2001.12.01 | API RP 5L9 |
| External Fusion Bonded Epoxy Coating of Line Pipe - FIRST EDITION | 2001.12.01 | API RP 5L9 KAZAKH |
| External Fusion Bounded Epoxy Coating of Line Pipe - First Edition | 2001.12.01 | API RP 5L9 RUSSIAN |
| Recommended Practice for Truck Transportation of Line Pipe - First Edition | 2012.03.01 | API RP 5LT |
| Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels - Third Edition | 2009.09.01 | API RP 5LW |
| Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier - First Edition | 2006.01.01 | API RP 5SI |
| Recommended Practice for Ultrasonic Evaluation of Pipe Imperfections - Second Edition | 2005.06.01 | API RP 5UE |
| Valve Selection Guide - First Edition | 2010.06.01 | API RP 615 |
| Reconditioning of Metallic Gate, Globe, and Check Valves - Third Edition | 2010.08.01 | API RP 621 |
| Reconditioning of Metallic Gate, Globe, and Check Valves - Third Edition | 2010.08.01 | API RP 621 RUSSIAN |
| Recommended Practice for Diverter Systems Equipment and Operations - Second Edition | 2001.11.01 | API RP 64 |
| Recommended Practice for Diverter Systems Equipment and Operations - Second Edition | 2001.11.01 | API RP 64 KAZAKH |
| Recommended Practice for Diverter Systems Equipment and Operations - Second Edition | 2001.11.01 | API RP 64 RUSSIAN |
| Cementing Shallow Water Flow Zones in Deep Water Wells - First Edition | 2002.09.01 | API RP 65 |
| Cementing Shallow Water Flow Zones in Deepwater Wells - First Edition | 2002.09.01 | API RP 65 KAZAKH |
| CEMENTING SHALLOW WATER FLOW ZONES IN DEEPWATER WELLS - First Edition | 2002.09.01 | API RP 65 RUSSIAN |
| Cathodic Protection of Aboveground Petroleum Storage Tanks - Third Edition | 2007.01.01 | API RP 651 |
| Cathodic Protection of Aboveground Petroleum Storage Tanks - Third Edition | 2007.01.01 | API RP 651 CHINESE |
| Linings of Aboveground Petroleum Storage Tank Bottoms - Third Edition | 2005.10.01 | API RP 652 |
| Isolating Potential Flow Zones During Well Construction - First Edition | 2010.05.01 | API RP 65-2 |
| Linings of Aboveground Petroleum Storage Tank Bottoms - Third Edition | 2005.10.01 | API RP 652 CHINESE |
| Recommended Practices for Oilfield Explosives Safety - Second Edition | 2007.05.01 | API RP 67 |
| Recommended Practice for Oilfield Explosives Safety - SECOND EDITION | 2007.05.01 | API RP 67 KAZAKH |
| Recommended Practice for Oilfield Explosives Safety - SECOND EDITION | 2007.05.01 | API RP 67 RUSSIAN |
| Recommended Practice for Oil and Gas Well Servicing and Workover Operations Involving Hydrogen Sulfide - First Edition | 1998.01.01 | API RP 68 |
| Paragraphs Rotodynamic Tutorial: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsionals and Rotor Balancing - Second Edition | 2005.08.01 | API RP 684 |
| Recommended Practice for Machinery Installation and Installation Design - Second Edition | 2009.12.01 | API RP 686 |
| Rotor Repair - First Edition | 2001.09.01 | API RP 687 |
| Pulsation and Vibration Control in Positive Displacement Machinery Systems for Petroleum, Petrochemical, and Natural Gas Industry Services - First Edition | 2012.04.01 | API RP 688 |
| Recommended Practice for the Repair and Remanufacture of Pipeline Valves - Second Edition | 2012.05.01 | API RP 6DR |
| Repair and Remanufacture of Pipeline Valves - First Edition | 2006.02.01 | API RP 6DR RUSSIAN |
| Heat Treatment and Testing of Carbon and Low Alloy Steel Large Cross Section and Critical Section Components - Second Edition | 2013.06.01 | API RP 6HT |
| Security for Offshore Oil and Natural Gas Operations - First Edition | 2003.03.01 | API RP 70 |
| Security for Worldwide Offshore Oil and Natural Gas Operations - First Edition | 2004.05.01 | API RP 70I |
| Recommended Practice for Occupational Safety for Onshore Oil and Gas Production Operation - First Edition | 2001.10.01 | API RP 74 |
| Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities - Third Edition | 2004.05.01 | API RP 75 |
| Safe Operation of Hydrofluoric Acid Alkylation Units - Fourth Edition | 2013.05.01 | API RP 751 |
| Management of Hazards Associated with Location of Process Plant Permanent Buildings - Third Edition | 2009.12.01 | API RP 752 |
| Management of Hazards Associated with Location of Process Plant Portable Buildings - First Edition | 2007.06.01 | API RP 753 |
| Process Safety Performance Indicators for the Refining and Petrochemical Industries - First Edition | 2010.04.01 | API RP 754 |
| Fatigue Risk Management Systems for Personnel in the Refining and Petrochemical Industries - First Edition | 2010.04.01 | API RP 755 |
| Contractor Safety Management for Oil and Gas Drilling and Production Operations - SECOND EDITION | 2007.11.01 | API RP 76 |
| Recommended Practice for Drill Stem Design and Operating Limits - Sixteenth Edition | 1998.08.01 | API RP 7G |
| RECOMMENDED PRACTICE FOR DRILL STEM DESIGN AND OPERATING LIMITS - Sixteenth Edition | 1998.08.01 | API RP 7G KAZAKH |
| RECOMMENDED PRACTICE FOR DRILL STEM DESIGN AND OPERATING LIMITS - Sixteenth Edition | 1998.08.01 | API RP 7G RUSSIAN |
| Recommended Practice for Inspection and Classification of Used Drill Stem Elements - First Edition: Incorporating Errata 1: October 2009 | 2009.08.01 | API RP 7G-2 |
| Safe Use of 2-inch Hammer Unions for Oilfield Applications - First Edition | 2009.05.01 | API RP 7HU1 |
| Guidance for the Definition of Onshore Gas Gathering Lines - First Edition | 2000.04.01 | API RP 80 |
| Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems - First Edition | 2003.08.01 | API RP 85 |
| Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems - First Edition | 2013.01.01 | API RP 85 ADD |
| API Recommended Practice for Measurement of Multiphase Flow - First Edition | 2005.09.01 | API RP 86 |
| Recommended Practice for Field Analysis of Crude Oil Samples Containing from Two to Fifty Percent Water by Volume - FIRST EDITION | 2007.08.01 | API RP 87 |
| Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment - Seventh Edition | 2002.03.01 | API RP 8B |
| Annular Casing Pressure Management for Offshore Wells - First Edition | 2006.08.01 | API RP 90 |
| Management Practices, Self-Assessment Process, and Resource Materials - Second Edition | 1998.10.01 | API RP 9000 |
| Underbalanced Drilling Operations - FIRST EDITION | 2008.11.01 | API RP 92U |
| Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems - Second Edition | 2012.03.01 | API RP 932-B |
| Materials and Fabrication Requirements for 2-1/4Cr-1Mo and 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hyrdogen Service - First Edition | 2000.12.01 | API RP 934 |
| Materials and Fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4V, 3Cr-1Mo, and 3Cr-1Mo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service - SECOND EDITION | 2008.05.01 | API RP 934-A |
| Materials and Fabrication of 2 1/4Cr-1Mo, 2 1/4Cr-1Mo-1/4V, 3Cr-1Mo, and 3Cr-1Mo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature, High-pressure Hydrogen Service - SECOND EDITION | 2008.05.01 | API RP 934-A RUSSIAN |
| Materials and Fabrication of 1 1/4Cr-1/2Mo Steel Heavy Wall Pressure Vessels for High-pressure Hydrogen Service Operating at or Below 825 °F (441 °C) - First Edition | 2008.05.01 | API RP 934-C |
| Materials and Fabrication of 1 1/4Cr-1/2Mo Steel Heavy Wall Pressure Vessels for High-pressure Hydrogen Service Operating at or Below 825 °F (441 °C) - First Edition | 2008.05.01 | API RP 934-C RUSSIAN |
| Recommended Practice for Materials and Fabrication of 11/4CR-1/2Mo Steel Pressure Vessels for Service Above 825 °F (440 °C) - First Edition | 2010.08.01 | API RP 934-E |
| Recommended Practice for Materials and Fabrication of 11/4CR-1/2Mo Steel Pressure Vessels for Service Above 825 °F (440 °C) - First Edition | 2010.08.01 | API RP 934-E RUSSIAN |
| Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries - FIRST EDITION | 2009.05.01 | API RP 939-C |
| Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants - Seventh Edition | 2008.08.01 | API RP 941 |
| Avoiding Environmental Cracking in Amine Units - Third Edition | 2003.06.01 | API RP 945 |
| Gulf of Mexico MODU Mooring Practices for the 2007 Hurricane Season- Interim Recommendations - SECOND EDITION | 2007.04.01 | API RP 95F |
| Gulf of Mexico Jackup Operations for Hurricane Season - First Edition | 2006.06.01 | API RP 95J |
| Deepwater Well Design and Construction - First Edition | 2013.03.01 | API RP 96 |
| Application, Care, and Use of Wire Rope for Oil Field Service - THIRTEENTH EDITION | 2011.10.01 | API RP 9B |
| RECOMMENDED PRACTICE ON APPLICATION CARE, AND USE OF WIRE ROPE FOR OIL FIELD SERVICE - Twelfth Edition | 2005.06.01 | API RP 9B KAZAKH |
| RECOMMENDED PRACTICE ON APPLICATION CARE, AND USE OF WIRE ROPE FOR OIL FIELD SERVICE - Twelfth Edition | 2005.06.01 | API RP 9B RUSSIAN |
| Recommended Practice for Qualification Programs for Offshore Production Personnel Who Work with Safety Devices - Second Edition | 2001.12.01 | API RP T-2 |
| Recommended Practice for Training and Qualification of Personnel in Well Control Equipment and Techniques for Wireline Operations on Offshore Locations - First Edition | 2002.10.01 | API RP T-6 |
| Modifying Single-Hull Tankers: Costs and Benefits | 1998.03.01 | API RS 92 |
| Organization and Procedures for Standardization of Oilfield Equipment and Materials - Twentieth Edition | 2001.05.01 | API S1 |
| 2011 Sales of Natural Gas Liquids and Liquefied Refinery Gases | 2013.02.01 | API SALES OF NGL & LRG |
| Security Vulnerability Assessment Methodology for the Petroleum and Petrochemical Industries - Second Edition | 2004.10.01 | API SECURITY |
| Security Guidelines for the Petroleum Industry - Third Edition | 2005.04.01 | API SECURITY GUIDELINES |
| Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions | 2004.06.01 | API SMART LEAK |
| Specification for Cements and Materials for Well Cementing - Twenty-Fourth Edition | 2010.12.01 | API SPEC 10A |
| Specification for Cements and Materials for Well Cementing - Twenty-Third Edition | 2002.04.01 | API SPEC 10A CHINESE |
| Specification for Bow-Spring Casing Centralizers - Sixth Edition | 2002.03.01 | API SPEC 10D |
| Specification for Bow-Spring Casing Centralizers - Sixth Edition | 2002.03.01 | API SPEC 10D CHINESE |
| Specification for Subsurface Sucker Rod Pumps and Fittings - Twelfth Edition | 2006.06.01 | API SPEC 11AX |
| Specification for Subsurface Sucker Rod Pumps and Fittings - Twelfth Edition | 2012.10.01 | API SPEC 11AX ADD 2 CHINESE |
| Specification for Subsurface Sucker Rod Pumps and Fittings - Twelfth Edition | 2006.06.01 | API SPEC 11AX CHINESE |
| Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod Clamps, Stuffing Boxes, and Pumping Tees - Twenty-Seventh Edition: Incorporating Errata 1: October 2010 | 2010.05.01 | API SPEC 11B |
| Specification for Sucker Rods, Polished Rods and Liners, Couplings, Sinker Bars, Polished Rod Clamps, Stuffing Boxes, and Pumping Tees - Twenty-Seventh Edition | 2010.05.01 | API SPEC 11B CHINESE |
| Packers and Bridge Plugs - Second Edition | 2009.07.01 | API SPEC 11D1 |
| Packers and Bridge Plugs - Second Edition | 2009.07.01 | API SPEC 11D1 CHINESE |
| Specification for Pumping Units - Eighteenth Edition | 2008.11.01 | API SPEC 11E |
| Specification for Pumping Units - Eighteenth Edition | 2008.11.01 | API SPEC 11E CHINESE |
| Recommended Practice for Independent Wellhead Equipment - First Edition | 2000.06.01 | API SPEC 11IW |
| Specification for Bolted Tanks for Storage of Production Liquids - Fifteenth Edition | 2008.10.01 | API SPEC 12B |
| Specification for Field Welded Tanks for Storage of Production Liquids - Eleventh Edition | 2008.10.01 | API SPEC 12D |
| Specification for Shop Welded Tanks for Storage of Production Liquids - Twelfth Edition | 2008.10.01 | API SPEC 12F |
| Specification for Oil and Gas Separators - Eighth Edition | 2008.10.01 | API SPEC 12J |
| Specification for Oil and Gas Separators - Eighth Edition | 2008.10.01 | API SPEC 12J RUSSIAN |
| Specification for Indirect Type Oilfield Heaters - Eighth Edition | 2008.10.01 | API SPEC 12K |
| Specification for Indirect Type Oilfield Heaters - Eighth Edition | 2008.10.01 | API SPEC 12K CHINESE |
| Specification for Vertical and Horizontal Emulsion Treaters - Fifth Edition | 2008.10.01 | API SPEC 12L |
| Specification for Fiberglass Reinforced Plastic Tanks - Third Edition | 2008.10.01 | API SPEC 12P |
| Specification for Drilling-Fluid Materials - 18th Edition | 2010.02.01 | API SPEC 13A |
| Specification for Drilling Fluids Materials - Eighteenth Edition | 2010.02.01 | API SPEC 13A CHINESE |
| Specification for Subsurface Safety Valve Equipment - Eleventh Edition | 2005.10.01 | API SPEC 14A |
| Specification for Subsurface Safety Valve Equipment - Eleventh Edition | 2005.10.01 | API SPEC 14A CHINESE |
| Specification for Subsurface Safety Valve Equipment - Tenth Edition | 2000.11.01 | API SPEC 14A RUSSIAN |
| Specification for Lock Mandrels and Landing Nipples - Second Edition | 2007.08.01 | API SPEC 14L |
| Specification for High Pressure Fiberglass Line Pipe - Third Edition | 2001.08.01 | API SPEC 15HR |
| Specification for High Pressure Fiberglass Line Pipe - Third Edition | 2001.08.01 | API SPEC 15HR CHINESE |
| Specification for High Pressure Fiberglass Line Pipe - Third Edition | 2007.02.01 | API SPEC 15HR ERTA 1 |
| Specification for High Pressure Fiberglass Line Pipe - Third Edition | 2008.01.01 | API SPEC 15HR ERTA 2 |
| Specification for Polyethylene Line Pipe (PE) - FOURTH EDITION | 2008.01.01 | API SPEC 15LE |
| Specification for Low Pressure Fiberglass Line Pipe and Fittings - Seventh Edition | 2001.08.01 | API SPEC 15LR |
| Specification for Low Pressure Fiberglass line Pipe and Fittings - Seventh Edition | 2001.08.01 | API SPEC 15LR CHINESE |
| Specification for Drill-Through Equipment - Third Edition | 2004.06.01 | API SPEC 16A |
| Specification for Drill-Through Equipment - Third Edition | 2004.06.01 | API SPEC 16A CHINESE |
| Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment - SECOND EDITION | 2004.07.01 | API SPEC 16D |
| ACCUMULATING SIZING SOFTWARE - 1ST EDITION - THIS SOFTWARE WILL ALLOW THE USER TO DETERMINE THE ACCUMULATOR VOLUME REQUIREMENTS FOR THEIR SPECIFIC WELL CONTROLS SYSTEM USING THE METHODOLOGIES PRESENTED IN API SPECIFICATION 16D:JULY 2004 - CD-Rom | 2004.12.01 | API SPEC 16D CD |
| Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment - Second Edition | 2004.07.01 | API SPEC 16D CHINESE |
| Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment - SECOND EDITION | 2004.07.01 | API SPEC 16D KAZAKH |
| Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment - Second Edition | 2004.07.01 | API SPEC 16D RUSSIAN |
| Specification for Marine Drilling Riser Equipment - First Edition | 2004.08.01 | API SPEC 16F |
| Specification for Marine Drilling Riser Couplings - First Edition | 1997.01.01 | API SPEC 16R |
| Specification for Drill Through Equipment - Rotating Control Devices - First Edition | 2005.02.01 | API SPEC 16RCD |
| Specification for Drill Through Equipment - Rotating Control Devices - First Edition | 2005.02.01 | API SPEC 16RCD KAZAKH |
| Specification for Drill Through Equipment - Rotating Control Devices - First Edition | 2005.02.01 | API SPEC 16RCD RUSSIAN |
| Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment - Second Edition | 2011.05.01 | API SPEC 17D |
| Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment - Second Edition | 2011.05.01 | API SPEC 17D CHINESE |
| Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment - Second Edition | 2011.05.01 | API SPEC 17D ERTA 2 CHINESE |
| Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment - Second Edition | 2013.06.01 | API SPEC 17D ERTA 3 |
| Specification for Subsea Umbilicals - Fourth Edition | 2010.10.01 | API SPEC 17E |
| Specification for Subsea Production Control Systems - Second Edition: ISO 13628-6 Adoption | 2006.12.01 | API SPEC 17F |
| Specification for Unbonded Flexible Pipe - Third Edition | 2008.07.01 | API SPEC 17J |
| Specification for Unbonded Flexible Pipe - Third Edition | 2010.08.01 | API SPEC 17J ERTA |
| Specification for Unbonded Flexible Pipe - Third Edition | 2009.02.01 | API SPEC 17J ERTA |
| Specification for Bonded Flexible Pipe - Second Edition | 2005.11.01 | API SPEC 17K |
| Specification for Flexible Pipe Ancillary Equipment - First Edition | 2013.03.01 | API SPEC 17L1 |
| Side-pocket Mandrels - FIRST EDITION | 2010.05.01 | API SPEC 19G1 |
| Flow-control Devices for Side-pocket Mandrels - FIRST EDITION | 2010.06.01 | API SPEC 19G2 |
| Running Tools, Pulling Tools, and Kick-over Tools and Latches for Side-pocket Mandrels - FIRST EDITION | 2011.06.01 | API SPEC 19G3 |
| Subsurface Barrier Valves and Related Equipment - FIRST EDITION | 2013.05.01 | API SPEC 19V |
| Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum and Natural Gas Industry - First Edition | 2012.03.01 | API SPEC 20A |
| Open Die Shaped Forgings for Use in the Petroleum and Natural Gas Industry - First Edition | 2013.04.01 | API SPEC 20B |
| Closed Die Forgings for Use in the Petroleum and Natural Gas Industry - First Edition | 2009.10.01 | API SPEC 20C |
| Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries - FIRST EDITION | 2012.08.01 | API SPEC 20E |
| Specification for the Fabrication of Structural Steel Pipe - Sixth Edition | 2001.07.01 | API SPEC 2B |
| Specification for the Fabrication of Structural Steel Pipe - Sixth Edition | 2001.07.01 | API SPEC 2B CHINESE |
| Offshore Pedestal-mounted Cranes - Seventh Edition | 2012.03.01 | API SPEC 2C |
| Offshore Pedestal-mounted Cranes - Seventh Edition | 2012.03.01 | API SPEC 2C CHINESE |
| Specification for Offshore Pedestal Mounted Cranes - Sixth Edition | 2004.03.01 | API SPEC 2C KAZAKH |
| Specification for Offshore Pedestal Mounted Cranes - Sixth Edition | 2004.03.01 | API SPEC 2C RUSSIAN |
| Specification for Mooring Chain - Sixth Edition | 1997.06.01 | API SPEC 2F |
| Specification for Mooring Chain - Sixth Edition | 1997.06.01 | API SPEC 2F CHINESE |
| Specification for Carbon Manganese Steel Plate for Offshore Structures - Ninth Edition | 2006.07.01 | API SPEC 2H |
| Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore Structures - Second Edition | 2001.09.01 | API SPEC 2MT1 |
| Rolled Shapes with Improved Notch Toughness - First Edition | 2002.06.01 | API SPEC 2MT2 |
| Manufacture of Structural Steel Castings for Primary Offshore Applications - First Edition | 2009.09.01 | API SPEC 2SC |
| Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP) - Fifth Edition | 2006.12.01 | API SPEC 2W |
| Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP) - Fifth Edition | 2006.12.01 | API SPEC 2W RUSSIAN |
| Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures - Fifth Editon | 2006.12.01 | API SPEC 2Y |
| Specification for Drilling and Well Servicing Structures - Fouth Edition | 2013.01.01 | API SPEC 4F |
| Specification for Drilling and Well Servicing Structures - Third Edition | 2008.01.01 | API SPEC 4F CHINESE |
| Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads - FIFTEENTH EDITION | 2008.04.01 | API SPEC 5B |
| Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads - FIFTEENTH EDITION | 2008.04.01 | API SPEC 5B CHINESE |
| Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads - FIFTEENTH EDITION | 2008.04.01 | API SPEC 5B KAZAKH |
| SPECIFICATION FOR THREADING, GAUGING AND THREAD INSPECTION OF CASING, TUBING, AND LINE PIPE THREADS - FIFTEENTH EDITION | 2008.04.01 | API SPEC 5B RUSSIAN |
| Specification for Corrosion Resistant Alloy Seamless Tubes for Use as Casing, Tubing and Coupling Stock - First Edition | 2010.02.01 | API SPEC 5CRA |
| Specification for Casing and Tubing - NINTH EDITION | 2011.07.01 | API SPEC 5CT |
| Specification for Casing and Tubing - Ninth Edition | 2011.07.01 | API SPEC 5CT CHINESE |
| Specification for Casing and Tubing - NINTH EDITION | 2012.09.01 | API SPEC 5CT ERTA |
| Specification for Drill Pipe - Fifth Edition | 2001.10.01 | API SPEC 5D |
| Specification for Drill Pipe - FIRST EDITION | 2009.08.01 | API SPEC 5DP |
| Specification for Drill Pipe - First Edition | 2009.08.01 | API SPEC 5DP CHINESE |
| Specification for Line Pipe - FORTY-FIFTH EDITION | 2012.12.01 | API SPEC 5L |
| Specification for Line Pipe - FORTY-FOURTH EDITION | 2007.10.01 | API SPEC 5L CHINESE |
| Specification for CRA Line Pipe - Third Edition | 1998.07.01 | API SPEC 5LC |
| Specification for Coiled Line Pipe - Second Edition | 2006.10.18 | API SPEC 5LCP |
| Specification for Coiled Line Pipe - Second Edition | 2007.07.01 | API SPEC 5LCP ERTA |
| Specification for CRA Clad or Lined Steel Pipe - Third Edition | 2009.03.01 | API SPEC 5LD |
| Specification for CRA Clad or Lined Steel Pipe - Third Edition | 2009.03.01 | API SPEC 5LD CHINESE |
| Specification for Coiled Tubing - U.S. Customary and SI Units - FIRST EDITION | 2010.04.01 | API SPEC 5ST |
| Specification for Wellhead and Christmas Tree Equipment - Twentieth Edition | 2010.10.01 | API SPEC 6A |
| Specification for Wellhead and Christmas Tree Equipment - Twentieth Edition | 2011.11.01 | API SPEC 6A ADD 1 CHINESE |
| Specification for Wellhead and Christmas Tree Equipment - Twentieth Edition | 2010.10.01 | API SPEC 6A CHINESE |
| Specification of Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment - First Edition | 2004.03.01 | API SPEC 6A718 |
| Specification for Validation of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service - Second Edition | 2013.02.01 | API SPEC 6AV1 |
| Specification for Pipeline Valves - Twenty-Third Edition | 2008.04.01 | API SPEC 6D |
| Specification for Pipeline Valves - Twenty-Third Edition | 2009.10.01 | API SPEC 6D ADD 1 CHINESE |
| Specification for Pipeline Valves - Twenty-Third Edition | 2011.08.01 | API SPEC 6D ADD 2 CHINESE |
| Specification for Pipeline Valves - Twenty-Third Edition | 2011.08.01 | API SPEC 6D ADD 2 RUSSIAN |
| Specification for Pipeline Valves - Twenty-Third Edition | 2012.10.01 | API SPEC 6D ADD 3 CHINESE |
| Specification for Pipeline Valves - Twenty-Third Edition | 2008.04.01 | API SPEC 6D CHINESE |
| Specification for Pipeline Valves - Twenty-Third Edition | 2010.11.01 | API SPEC 6D ERTA 5 RUSSIAN |
| Specification for Pipeline Valves - Twenty-Third Edition | 2011.08.01 | API SPEC 6D ERTA 6 RUSSIAN |
| Specification for Pipeline Valves - Twenty-Third Edition | 2008.04.01 | API SPEC 6D RUSSIAN |
| Specification for Subsea Pipeline Valves - Second Edition | 2009.12.01 | API SPEC 6DSS |
| Specification for Subsea Pipeline Valves - Second Edition | 2010.09.01 | API SPEC 6DSS ERTA |
| Specification for Subsea Pipeline Valves - Second Edition | 2010.11.01 | API SPEC 6DSS ERTA 2 |
| Specification for Fire Test for Valves - THIRD EDITION | 1999.04.01 | API SPEC 6FA |
| Specification for Fire Test for Valves - Third Edition | 1999.04.01 | API SPEC 6FA RUSSIAN |
| Specification for Fire Test for End Connections - THIRD EDITION | 1998.05.01 | API SPEC 6FB |
| Specification for Fire Test for Valves with Automatic Backseats - FOURTH EDITION | 2009.03.01 | API SPEC 6FC |
| Specification for Fire Test for Valves with Automatic Backseats - Third Edition | 1999.04.01 | API SPEC 6FC RUSSIAN |
| Specification on End Closures, Connectors and Swivels - SECOND EDITION | 1998.05.01 | API SPEC 6H |
| Specification on End Closures, Connectors and Swivels - SECOND EDITION | 1998.05.01 | API SPEC 6H CHINESE |
| Specification for Rotary Drill Stem Elements - Fortieth Edition | 2001.11.01 | API SPEC 7 |
| Specification for Rotary Drill Stem Elements - Fortieth Edition | 2004.08.01 | API SPEC 7 ADD 1 |
| Specification for Rotary Drill Stem Elements - Fortieth Edition | 2006.03.01 | API SPEC 7 ADD 2 |
| Specification for Rotary Drill Stem Elements - Fortieth Edition | 2008.06.01 | API SPEC 7 ADD 3 |
| Specification for Rotary Drill Stem Elements - First Edition | 2006.03.01 | API SPEC 7-1 |
| Specification for Rotary Drill Stem Elements - First Edition | 2006.03.01 | API SPEC 7-1 CHINESE |
| Specification for Threading and Gauging of Rotary Shouldered Thread Connections - First Edition | 2008.06.01 | API SPEC 7-2 |
| Specification for Threading and Gauging of Rotary Shouldered Thread Connections - First Edition | 2010.12.01 | API SPEC 7-2 ADD 1 |
| Oil Field Chain and Sprockets - Eighth Edition, Includes Errata: May 2013 | 2010.11.01 | API SPEC 7F |
| Oil Field Chain and Sprockets - Eighth Edition | 2010.11.01 | API SPEC 7F CHINESE |
| Drilling and Well Servicing Equipment - FIFTH EDITION | 2010.06.01 | API SPEC 7K |
| Drilling and Well Servicing Equipment - FIFTH EDITION | 2010.06.01 | API SPEC 7K CHINESE |
| Specification for Drill String Non-return Valves - First Edition | 2006.07.10 | API SPEC 7NRV |
| Specification for Drilling and Production Hoisting Equipment - Thirteenth Edition | 1997.12.01 | API SPEC 8A |
| Specification for Drilling and Production Hoisting Equipment - Thirteenth Edition | 2001.05.01 | API SPEC 8A ADD 1 |
| Specification for Drilling and Production Hoisting Equipment - Thirteenth Edition | 1997.12.01 | API SPEC 8A CHINESE |
| Specification for Drilling and Production Hoisting Equipment - THIRTEENTH EDITION | 1997.12.01 | API SPEC 8A KAZAKH |
| Specification for Drilling and Production Hoisting Equipment - Thirteenth Edition | 1997.12.01 | API SPEC 8A RUSSIAN |
| Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) - Fifth Edition | 2012.04.01 | API SPEC 8C |
| Drilling and Production Hoisting Equipment (PSL 1 and PSL 2) - Fifth Edition | 2012.04.01 | API SPEC 8C CHINESE |
| Specification for Wire Rope - Twenty-Sixth Edition | 2011.05.01 | API SPEC 9A |
| Specification for Wire Rope - Twenty-sixth Edition | 2011.05.01 | API SPEC 9A CHINESE |
| Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry - Ninth Edition | 2013.06.01 | API SPEC Q1 |
| Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry - Eighth Edition | 2007.12.01 | API SPEC Q1 CHINESE |
| Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry - Eighth Edition | 2007.12.01 | API SPEC Q1 KAZAKH |
| Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry - Eighth Edition | 2007.12.01 | API SPEC Q1 RUSSIAN |
| Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry - Eighth Edition | 2010.06.01 | API SPEC Q1 RUSSIAN ANX 1 |
| Specification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries - First Edition | 2011.12.01 | API SPEC Q2 |
| Specification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries - First Edition | 2011.12.01 | API SPEC Q2 CHINESE |
| Welding of Pipelines and Related Facilities - Twentieth Edition | 2005.10.01 | API STD 1104 |
| WELDING OF PIPELINES AND RELATED FACILITIES - Twentieth Edition | 2005.10.01 | API STD 1104 RUSSIAN |
| Managing System Integrity for Hazardous Liquid Pipelines - First Edition | 2001.11.01 | API STD 1160 |
| In-line Inspection Systems Qualification Standard - Second Edition | 2013.04.01 | API STD 1163 |
| Pipeline SCADA Security - Second Edition | 2009.07.01 | API STD 1164 |
| Progressing Cavity Pump Systems for Artificial Lift-Pumps - First Edition | 2010.10.01 | API STD 11D2 |
| Progressing Cavity Pump Systems for Artificial Lift-Surface-drive Systems - First Edition | 2008.06.01 | API STD 11D3 |
| Aviation Fueling Hose - Fifth Editon | 1998.05.01 | API STD 1529 |
| Interior Lining and Periodic Inspection of Underground Storage Tanks - Fifth Edition | 2001.06.01 | API STD 1631 |
| Venting Atmospheric and Low-pressure Storage Tanks - Sixth Edition | 2009.11.01 | API STD 2000 |
| Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks - Sixth Edition | 2001.08.01 | API STD 2015 |
| Guidelines for Safe Work in Inert Confined Spaces in the Petroleum and Petrochemical Industries - Fourth Edition | 2009.07.01 | API STD 2217A |
| Contractor Safety Performance Process - Third Edition | 2011.10.01 | API STD 2220 |
| Overfill Protection for Storage Tanks in Petroleum Facilities - Fourth Edition | 2012.05.01 | API STD 2350 |
| Design and Construction of LPG Installations - Eighth Edition | 2001.05.01 | API STD 2510 |
| Diseño y construcción de instalaciones de GLP - OCTAVA EDICIÓN | 2001.05.01 | API STD 2510 SPANISH |
| Reconciliation of Liquid Pipeline Quantities - First Edition | 2003.12.01 | API STD 2560 |
| Design, Construction, Operation, Maintenance, and Inspection of Terminal & | 2005.05.01 | API STD 2610 |
| Diseño, construcción, operación, mantenimiento e inspección de instalaciones de terminales y tanque - SEGUNDA EDICIÓN | 2005.05.01 | API STD 2610 SPANISH |
| Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries Part I - Sizing and Selection - EIGHTH EDITION | 2008.12.01 | API STD 520 PT I |
| Pressure-relieving and Depressuring Systems - Fifth Edition | 2007.01.01 | API STD 521 |
| Flanged Steel Pressure-relief Valves - Sixth Edition | 2009.04.01 | API STD 526 |
| Flanged Steel Pressure Relief Valves - Fifth Edition | 2002.06.01 | API STD 526 RUSSIAN |
| Blowout Prevention Equipment Systems for Drilling Wells - Fourth Edition | 2012.11.01 | API STD 53 |
| Calculation of Heater-tube Thickness in Petroleum Refineries - Sixth Edition | 2008.09.01 | API STD 530 |
| Calculation of Heater tube Thickness in Petroleum Refineries - Sixth Edition | 2009.01.01 | API STD 530 ERTA |
| Flare Details for General Refinery and Petrochemical Service - SECOND EDITION | 2008.12.01 | API STD 537 |
| Flare Details for General Refinery and Petrochemical Service – Mechanical Equipment Data Sheet - Second Edition | 2008.01.01 | API STD 537 DATA SHEET |
| Form-Wound Squirrel-Cage Induction Motors - 500 Horsepower and Larger - Fourth Edition | 2004.06.01 | API STD 541 |
| Form-Wound Squirrel-Cage Induction Motors - 500 Horsepower and Larger – Mechanical Equipment Data Sheet - Fourth Edition | 2004.01.01 | API STD 541 DATA SHEET |
| Brushless Synchronous Machines - 500 kVA and Larger - Third Edition | 2008.09.01 | API STD 546 |
| Brushless Synchronous Machines - 500 kVA and Larger – Mechanical Equipment Data Sheet - Third Edition | 2008.09.01 | API STD 546 DATA SHEET |
| General-purpose Form-wound Squirrel Cage Induction Motors 250 Horsepower and Larger - First Edition | 2005.01.01 | API STD 547 |
| Fired Heaters for General Refinery Services - Fourth Edition | 2007.08.01 | API STD 560 |
| Fire Test for Evaluation of Valve Stem Packing - Second Edition | 1998.07.01 | API STD 589 |
| Check Valves: Flanged, Lug, Wafer, and Butt-welding - Seventh Edition | 2010.09.01 | API STD 594 |
| Check Valves: Flanged, Lug, Wafer and Butt-welding - Sixth Edition | 2004.09.01 | API STD 594 CHINESE |
| Check Valves: Flanged, Lug, Wafer and Butt-welding - Sixth Edition | 2004.09.01 | API STD 594 RUSSIAN |
| Valve Inspection and Testing - Ninth Edition | 2009.09.01 | API STD 598 |
| Valve Inspection and Testing - Ninth Edition | 2009.09.01 | API STD 598 RUSSIAN |
| Metal Plug Valves-Flanged, Threaded and Welding Ends - SEVENTH EDITION | 2013.01.01 | API STD 599 |
| Metal Plug Valves - Flanged, Threaded and Welding Ends - Fifth Edition | 2002.08.01 | API STD 599 RUSSIAN |
| Standard on Imperfection Terminology - Tenth Edition | 2003.09.01 | API STD 5T1 ADD 1 |
| Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets - Twelfth Edition | 2009.03.01 | API STD 600 |
| Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets - Twelfth Edition | 2009.03.01 | API STD 600 CHINESE |
| Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets - Twelfth Edition | 2009.03.01 | API STD 600 RUSSIAN |
| Steel Gate, Globe, and Check Valves for Sizes NPS 4 (DN 100) and Smaller for the Petroleum and Natural Gas Industries - Ninth Edition | 2009.10.01 | API STD 602 |
| Steel Gate, Globe, and Check Valves for Sizes NPS 4 (DN 100) and Smaller for the Petroleum and Natural Gas Industries - Ninth Edition | 2009.10.01 | API STD 602 CHINESE |
| Steel Gate, Globe, and Check Valves for Sizes NPS 4 (DN 100) and Smaller for the Petroleum and Natural Gas Industries - Ninth Edition | 2009.10.01 | API STD 602 RUSSIAN |
| Corrosion-resistant, Bolted Bonnet Gate Valves-Flanged and Butt-welding Ends - EIGHTH EDITION: EFFECTIVE DATE: JULY 2013 | 2013.02.01 | API STD 603 |
| Corrosion-resistant, Bolted Bonnet Gate Valves-Flanged and Butt-welding Ends - SEVENTH EDITION | 2007.07.01 | API STD 603 RUSSIAN |
| Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats - Sixth Edition | 2010.09.01 | API STD 607 |
| Fire Test for Soft-seated Quarter-turn Valves - Fifth Edition | 2005.06.01 | API STD 607 RUSSIAN |
| Metal Ball Valves - Flanged, Threaded, and Welding Ends - FIFTH EDITION | 2012.11.01 | API STD 608 |
| Metal Ball Valves - Flanged, Threaded, and Welding Ends - FOURTH EDITION | 2008.12.01 | API STD 608 RUSSIAN |
| Butterfly Valves: Double-flanged, Lug- and Wafer-type - Seventh Edition | 2009.10.01 | API STD 609 |
| Butterfly Valves: Double-flanged, Lug- and Wafer-type - Seventh Edition | 2009.10.01 | API STD 609 CHINESE |
| Butterfly Valves: Double-flanged, Lug- and Wafer-type - Seventh Edition | 2009.10.01 | API STD 609 RUSSIAN |
| Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries - Eleventh Edition | 2010.09.01 | API STD 610 |
| General-purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services - Fifth Edition | 2008.03.01 | API STD 611 |
| General-purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services– Mechanical Equipment Data Sheet - Fifth Edition | 2008.03.01 | API STD 611 DATA SHEET |
| General-purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services - Fifth Edition | 2008.05.01 | API STD 611 ERTA |
| Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications - Sixth Edition | 2005.11.01 | API STD 612 |
| Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications – Mechanical Equipment Data Sheet - Sixth Edition | 2005.11.01 | API STD 612 DATA SHEET |
| Special Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services - Fifth Edition | 2003.02.01 | API STD 613 |
| Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries - Fifth Edition | 2008.04.01 | API STD 614 |
| Lubrication, Sheet-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services - Mechanical Equipment Data Sheet (Excel 5.0 Spreadsheets) - Fifth Edition | 2008.04.01 | API STD 614 DATA SHEET |
| Gas Turbines for Petroleum, Chemical, and Gas Industry Services - Fifth Edition | 2011.01.01 | API STD 616 |
| Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services - Seventh Edition | 2002.07.01 | API STD 617 |
| Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services - Fifth Edition | 2007.12.01 | API STD 618 |
| Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services - Mechanical Equipment Data Sheet - Fifth Edition | 2007.12.01 | API STD 618 DATA SHEET |
| Rotary-Type Positive-Displacement Compressors for Petroleum, Petrochemical and Natural Gas Industries - Fifth Edition | 2010.12.01 | API STD 619 |
| Design and Construction of Large, Welded, Low-pressure Storage Tanks - Eleventh Edition | 2008.02.01 | API STD 620 |
| Design and Construction of Large, Welded, Low-pressure Storage Tanks - Eleventh Edition | 2008.02.01 | API STD 620 RUSSIAN |
| Type Testing of Process Valve Packing for Fugitive Emissions - Second Edition | 2011.10.01 | API STD 622 |
| Tank Systems for Refrigerated Liquefied Gas Storage - First Edition | 2010.08.01 | API STD 625 |
| Welded Tanks for Oil Storage - Twelfth Edition | 2013.03.01 | API STD 650 |
| Welded Tanks for Oil Storage - Eleventh Edition | 2007.06.01 | API STD 650 CHINESE |
| Welded Tanks for Oil Storage - Mechanical Equipment Data Sheet - Eleventh Edition | 2007.06.01 | API STD 650 DATA SHEET |
| Welded Tanks for Oil Storage - Eleventh Edition | 2007.06.01 | API STD 650 RUSSIAN |
| Isolating Potential Flow Zones During Well Construction - Second Edition | 2010.12.01 | API STD 65-2 |
| Tank Inspection, Repair, Alteration, and Reconstruction - Fourth Edition | 2009.04.01 | API STD 653 |
| Tank Inspection, Repair, Alteration, and Reconstruction - Fourth Edition | 2012.01.01 | API STD 653 ADD 2 CHINESE |
| Tank Inspection, Repair, Alteration, and Reconstruction - Fourth Edition | 2009.04.01 | API STD 653 CHINESE |
| Shell-and-Tube Heat Exchangers - Eighth Edition | 2007.08.01 | API STD 660 |
| Shell-and-Tube Heat Exchangers - Mechanical Equipment Data Sheet - Eighth Edition | 2007.08.01 | API STD 660 DATA SHEET |
| Air-Cooled Heat Exchangers for General Refinery Service - Sixth Edition | 2006.02.01 | API STD 661 |
| Air-Cooled Heat Exchangers for General Refinery Service - Mechanical Equipment Data Sheet - Sixth Edition | 2006.02.01 | API STD 661 DATA SHEET |
| Plate Heat Exchangers for General Refinery Services - Second Edition | 2002.04.01 | API STD 662 |
| Plate Heat Exchangers for General Refinery Services Data Sheet - Second Edition | 2002.01.01 | API STD 662 DATA SHEET |
| Plate Heat Exchangers for General Refinery Services - Part 1 - Plate-and-Frame Heat Exchangers - First Edition | 2006.02.01 | API STD 662 PART 1 |
| Plate Heat Exchangers for General Refinery Services - Part 2 - Brazed Aluminum Plate-fin Heat Exchangers - First Edition | 2006.02.01 | API STD 662 PART 2 |
| Machinery Protection Systems - Fourth Edition | 2000.12.01 | API STD 670 |
| Machinery Protection Systems - Mechanical Equipment Data Sheet - Fourth Edition | 2001.01.01 | API STD 670 DATA SHEET |
| Special-Purpose Couplings for Petroleum, Chemical, and Gas Industry Services - Fourth Edition | 2007.08.01 | API STD 671 |
| Special-Purpose Couplings for Petroleum, Chemical, and Gas Industry Services - Mechanical Equipment Data Sheet - Fourth Edition | 2007.08.01 | API STD 671 DATA SHEET |
| Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services - Fourth Edition | 2004.03.01 | API STD 672 |
| Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services – Mechanical Equipment Data Sheet - 4th Edition | 2004.01.01 | API STD 672 DATA SHEET |
| Centrifugal Fans for Petroleum, Chemical and Gas for Industry Services - Second Edition | 2002.01.01 | API STD 673 |
| Positive Displacement Pumps - Reciprocating - Third Edition | 2010.12.01 | API STD 674 |
| Positive Displacement Pumps - Controlled Volume for Petroleum, Chemical, and Gas Industry Services - Third Edition | 2012.11.01 | API STD 675 |
| POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM,CHEMICAL, AND GAS INDUSTRY SERVICES - Third Edition | 2012.01.01 | API STD 675 DATA SHEET |
| Positive Displacement Pumps - Rotary - Third Edition | 2009.11.01 | API STD 676 |
| General-Purpose Gear Units for Petroleum, Chemical and Gas Industry Services - Third Edition | 2006.04.01 | API STD 677 |
| Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps - Third Edition | 2004.09.01 | API STD 682 |
| Pumps Shaft Sealing Systems for Centrifugal and Rotary Pumps - Mechanical Equipment Data Sheet - Third Edition | 2004.01.01 | API STD 682 DATA SHEET |
| Pumps Shaft Sealing Systems for Centrifugal and Rotary Pumps - Third Edition | 2006.11.10 | API STD 682 ERTA |
| Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Process Service - SECOND EDITION | 2011.02.01 | API STD 685 |
| Collection and Exchange of Reliability and Maintenance Data for Equipment - First Edition | 2007.07.01 | API STD 689 |
| Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment - Second Edition | 2009.12.01 | API STD 6A718 |
| Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment - SECOND EDITION | 2009.12.01 | API STD 6A718 KAZAKH |
| Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment - Second Edition | 2009.12.01 | API STD 6A718 RUSSIAN |
| Petroleum and natural gas industries-Mechanical integrity and sizing of actuators and mounting kits for pipeline valves - First Edition | 2012.10.01 | API STD 6DX |
| Security Risk Assessment Methodology for the Petroleum and Petrochemical Industries - FIRST EDITION | 2013.05.01 | API STD 780 |
| Refractory Installation Quality Control-Inspection and Testing Monolithic Refractory Linings and Materials - Third Edition | 2008.11.01 | API STD 936 |
| Technical Data Book Chapter 2 - Characterization of Hydrocarbons | 1997.01.01 | API TDB CHAPTER 2 |
| Standard for Third Party Network Connectivity | 2007.11.01 | API THIRD PARTY NETWORK |
| Temperature Correction for the Volume of Light Hydrocarbons Tables 24E and 23E | 1998.09.01 | API TP-25 |
| Cement Sheath Evaluation - Second Edition | 2008.09.01 | API TR 10TR1 |
| Cement Sheath Evaluation - Second Edition | 2008.09.01 | API TR 10TR1 RUSSIAN |
| Shrinkage and Expansion in Oilwell Cements - First Edition | 1997.07.01 | API TR 10TR2 |
| SHRINKAGE AND EXPANSION IN OILWELL CEMENTS - First Edition | 1997.07.01 | API TR 10TR2 RUSSIAN |
| Technical Report on Temperatures for API Cement Operating Thickening Time Tests | 1999.05.01 | API TR 10TR3 |
| Technical Report on Temperatures for API Cement Operating Thickening Time Tests - First Edition | 1999.05.01 | API TR 10TR3 RUSSIAN |
| Selection of Centralizers for Primary Cementing Operations - First Edition | 2008.05.01 | API TR 10TR4 |
| SELECTION OF CENTRALIZERS FOR PRIMARY CEMENTING OPERATIONS - First Edition | 2008.05.01 | API TR 10TR4 RUSSIAN |
| Methods for Testing of Solid and Rigid Centralizers - First Edition | 2008.05.01 | API TR 10TR5 |
| METHODS FOR TESTING OF SOLID AND RIGID CENTRALIZERS - First Edition | 2008.05.01 | API TR 10TR5 RUSSIAN |
| Design Calculations for Sucker Rod Pumping Systems (Conventional Units) - Fifth Edition | 2008.06.01 | API TR 11L |
| Technical Report on Electric Motor Prime Mover for Beam Pumping Unit Service - SECOND EDITION | 2008.05.01 | API TR 11L6 |
| Technical Report on Electric Motor Prime Mover for Beam Pumping Unit Service - Second Edition | 2008.05.01 | API TR 11L6 CHINESE |
| Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes - First Edition | 2003.03.01 | API TR 17TR1 |
| The Ageing of PA-11 in Flexible Pipes - First Edition | 2003.06.01 | API TR 17TR2 |
| An Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads below the BOP Stack - First Edition | 2004.11.01 | API TR 17TR3 |
| Subsea Equipment Pressure Ratings - First Edition | 2012.01.01 | API TR 17TR4 |
| Avoidance of Blockages in Subsea Production Control and Chemical Injection Systems - First Edition | 2012.03.01 | API TR 17TR5 |
| Attributes of Production Chemicals in Subsea Production Systems - First Edition | 2012.03.01 | API TR 17TR6 |
| Protocol for Verification and Validation of High-pressure High-temperature Equipment - First Edition | 2013.03.01 | API TR 1PER15K-1 |
| Evaporative Loss from Storage Tank Floating Roof Landings | 2005.04.01 | API TR 2567 |
| Evaporative Loss from the Cleaning of Storage Tanks | 2007.11.01 | API TR 2568 |
| Evaporative Loss from Closed-vent Internal Floating-roof Storage Tanks | 2008.08.01 | API TR 2569 |
| Fuel Gas Measurement - First Edition | 2011.03.01 | API TR 2571 |
| Carbon Content, Sampling, and Calculation - First Edition | 2013.05.01 | API TR 2572 |
| A Range-Finding Developmental Inhalation Toxicity Study of Unleaded Gasoline Vapor Condensate in Rats and Mice Via Whole-Body Exposers - Includes API TR 414 | 1998.04.01 | API TR 412 |
| An Inhalation Developmental Toxicity Study of Unleaded Gasoline Vapor Condensate in the Rat Via Whole-Body Exposure | 1998.04.01 | API TR 414 |
| Myths and Realities of Oil Spill Planning and Response: the Challenges of a Large Spill | 1999.01.01 | API TR 4686-007 |
| Technical Report on Equations and Calculations for Casing, Tubing, and Line Pipe Used as Casing or Tubing | 2008.12.01 | API TR 5C3 |
| Technical Report on SR22, Supplementary Requirements for Enhanced Leak Resistance LTC - First Edition | 2002.06.01 | API TR 5TRSR22 |
| Technical Report on Capabilities of API Flanges Under Combinations of Load - Third Edition | 2008.09.01 | API TR 6AF |
| Technical Report on Temperature Derating on API Flanges under Combination of Loading - Second Edition | 1998.11.01 | API TR 6AF1 |
| Technical Report on Capabilities of API Flanges Under Combinations of Loading - Phase II - FIFTH EDITION | 2013.04.01 | API TR 6AF2 |
| Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA - Third Edition | 1999.04.01 | API TR 6F1 |
| Technical Report on Fire Resistance Improvements for API Flanges - Third Edition | 1999.04.01 | API TR 6F2 |
| Elastomer Life Estimation Testing Procedures - First Edition | 2000.08.01 | API TR 6J1 |
| Metallic Material Limits for Wellhead Equipment Used in High Temperature for API 6A and 17D Applications - First Edition | 2010.10.01 | API TR 6MET |
| Technical Support Document for ANSI/API RP 755, Fatigue Risk Management Systems for Personnel in the Refining and Petrochemical Industries | 2010.04.01 | API TR 755-1 |
| Fabrication Considerations for Vanadium-Modified Cr-Mo Steel Heavy Wall Pressure Vessels - First Edition | 2011.04.01 | API TR 934-B |
| Technical Report on the Materials and Fabrication Issues of 11/4Cr-1/2Mo and 1Cr-1/2Mo Steel Pressure Vessels - First Edition | 2010.09.01 | API TR 934-D |
| Use of 9Cr-1Mo-V (Grade 91) Steel in the Oil Refining Industry - First Edition | 2008.06.01 | API TR 938-B |
| Use of Duplex Stainless Steels in the Oil Refining Industry - Second Edition | 2011.04.01 | API TR 938-C |
| Stress Corrosion Cracking of Carbon Steel in Fuel-Grade Ethanol: Review, Experience Survey, Field Monitoring, and Laboratory Testing - Second Edition | 2007.05.01 | API TR 939-D |
| The Technical Basis Document for API RP 941 | 2008.09.01 | API TR 941 |
| Comprehensive Report of API Crude Oil Characterization Measurements - First Edition | 2000.08.01 | API TR 997 |
| Putting Dispersants to Work: Overcoming Obstacles | 1997.01.01 | API TR IOSC-004 |
| MYTHS AND REALITIES OF OIL SPILL PLANNING AND RESPONSE: THE CHALLENGES OF A LARGE SPILL | 1999.01.01 | API TR IOSC-007 |
| Judging Oil Spill Response Performance: the Challenge of Competing Perspectives | 1999.01.01 | API TR IOSC-008 |
| TREATMENT WETLANDS FOR THE PETROLEUM INDUSTRY | 1998.01.01 | API TREATMENT WETLANDS |
| Vortex Shedding Flowmeter for Measurement of Hydrocarbon Fluids | 2007.01.01 | API VORTEX SHEDDING |
| Weekly Statistical Report - Volume: 94 | 2013.02.01 | API WEEKLY STAT |